STM32F769IGT6 vs STM32F765IGT6 Vergleich
Detaillierter Direktvergleich von STM32F769IGT6 von STMicroelectronics und STM32F765IGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F769IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F769IGT6 ✓ AktivSTMicroelectronics
STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765IGT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F769IGT6 | STM32F765IGT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $14,10 | $13,10 |
| Core | ARM Cortex-M7 with FPU + DSP | ARM Cortex-M7 with FPU (single + double precision) |
| Maximale Taktfrequenz | 216 MHz | — |
| DMIPS | 462 | — |
| Flash Memory | 1 MB | 1 MB (1 Mbyte), dual-bank with read-while-write |
| SRAM | 340 KB + 16 KB (D2 SRAM) | 512 KB total (368 KB SRAM + 16 KB ITCM + 16 KB DTCM) |
| Operating Voltage | 1.7 V to 3.6 V | — |
| Gehäuse | 176-LQFP (24x24 mm) | 176-LQFP (24x24 mm) |
| Supply Scheme | LDO / SMPS selectable via BYPASS_REG pin | — |
| Number of I/Os | Up to 140 GPIO | — |
| ADC | 3x 12-bit, up to 2.4 MSPS | 3 x 12-bit ADC up to 2.4 MSPS |
| DAC | 2x 12-bit | 2 x 12-bit DAC |
| USB | USB OTG FS + USB OTG HS (on-chip HS PHY) | — |
| CAN | 2x CAN 2.0B | 2 x CAN 2.0B Active |
| SDMMC | 2x SDMMC | — |
| Display Controller | TFT-LCD, Chrom-ART accelerator, JPEG codec | — |
| External Memory Bus | FMC, supports SRAM/PSRAM/NOR/NAND/SDRAM | — |
| Betriebstemperatur | -40C to +85C (industrial) | — |
| RoHS-Status | Compliant | Compliant (Ecopack2) |
| Montageart | Surface Mount | — |
| MSL-Level | [DATA_NEEDED: MSL level] | 3 (168 hours) |
| Maximum CPU Frequency | — | 216 MHz |
| DMIPS / CoreMark | — | 462 DMIPS / 1082 CoreMark |
| Versorgungsspannung | — | 1.7 V to 3.6 V |
| Betriebstemperaturbereich | — | -40C to +85C |
| USB Interfaces | — | 3 x USB 2.0 OTG (1 x HS with on-chip PHY) |
| Ethernet | — | IEEE 802.3 10/100 MAC with dedicated DMA (MII/RMII) |
| SPI | — | 6 x SPI interfaces |
| I2C | — | 3 x I2C interfaces |
| UART/USART | — | 4 x USART + 4 x UART |
| Hardware Crypto | — | AES-256, TRNG, Hash (SHA-1, SHA-224/256), Unique 96-bit ID |
| Graphics Acceleration | — | Chrom-ART (DMA2D), JPEG codec, optional LCD-TFT controller |