STM32F777IIK6 vs STM32F767IIT6 Vergleich
Detaillierter Direktvergleich von STM32F777IIK6 von STMicroelectronics und STM32F767IIT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F777IIK6 - 216MHz Cortex-M7 MCU 2MB Flash UFBGA-176 | STMicroelectronics
STM32F777IIK6 ✓ AktivSTMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F777IIK6 | STM32F767IIT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $16,12 | $11,95 |
| Core Architecture | ARM Cortex-M7 with FPU + DSP | — |
| CPU Frequency | 216 MHz max | — |
| DMIPS Performance | 462 DMIPS | — |
| Instruction Cache | 16 KB I-cache, 16 KB D-cache | — |
| Program Flash | 2 MB dual-bank | — |
| SRAM Total | 512 KB + 16 KB + 4 KB backup | — |
| Operating Voltage | 1.7 V to 3.6 V | — |
| Gehäuse | 176+25 UFBGA (10x10 mm) | 176-pin LQFP (24x24 mm) |
| Temperature Range | [DATA_NEEDED: industrial operating temperature range] | — |
| ADC | Two 12-bit, up to 2.4 MSPS each | 3x 12-bit, up to 2.4 MSPS |
| DAC | Two 12-bit | 2x 12-bit |
| Display Interface | TFT-LCD controller + MIPI-DSI | — |
| USB | USB OTG HS + USB OTG FS (with embedded PHY) | 2x USB OTG (FS + HS with on-chip PHY) |
| Ethernet | 10/100 MAC (IEEE 1588) | 10/100 MAC (MII/RMII) |
| CAN | Three CAN 2.0B controllers | 2x CAN 2.0B |
| SDMMC | Two SDMMC interfaces | 2x SDMMC |
| Quad-SPI | Dual-mode Quad-SPI (one) for external Flash/PSRAM | — |
| External Memory Bus | SDRAM, NAND, NOR (8/16/32-bit) | — |
| Crypto/Hash | AES-128/192/256, SHA-1/SHA-256, TRNG | AES-128/192/256, SHA-1/2, MD5, HMAC |
| Timers | Up to 18 (13x 16-bit + 2x 32-bit + low-power + watchdog + SysTick) | 12x 16-bit + 2x 32-bit |
| Montageart | Surface Mount (BGA) | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | 3 (168 hours) |
| RoHS-Status | Compliant | Compliant |
| Core | — | ARM Cortex-M7 32-bit RISC with FPU |
| Maximale Taktfrequenz | — | 216 MHz |
| DMIPS | — | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) |
| DSP Instructions | — | Yes (single-precision SIMD) |
| L1 Cache | — | 16 KB I-cache + 16 KB D-cache |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| Flash Memory | — | 2 MB |
| SRAM | — | 512 KB |
| Supply Voltage (VDD) | — | 1.7 V to 3.6 V |
| Betriebstemperatur | — | -40 C to +85 C |
| SPI / I2S | — | 6x SPI (2 with I2S) |
| I2C | — | 3x I2C |
| USART/UART | — | 4x USART + 2x UART |
| Graphics | — | TFT LCD controller, JPEG codec, Chrom-ART DMA2D |