STM32L073RBT6 vs STM32L053R8T6 Vergleich

Detaillierter Direktvergleich von STM32L073RBT6 von STMicroelectronics und STM32L053R8T6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

STMicroelectronics
STM32L073RBT6 STM32L073RBT6 - 32MHz ARM Cortex-M0+ 128KB Flash MCU | ST

STM32L073RBT6 - 32MHz ARM Cortex-M0+ 128KB Flash MCU | ST

STM32L073RBT6 ✓ Aktiv
STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Aktiv

Spezifikationsvergleich

Parameter STM32L073RBT6 STM32L053R8T6
Marke STMicroelectronics STMicroelectronics
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $2,93 $2,10
Core Architecture ARM Cortex-M0+ 32-bit
Core Width 32-bit —
Maximum CPU Frequency 32 MHz 32 MHz
Program Memory (Flash) 128 KB (128K x 8) —
RAM Size 20 KB —
EEPROM Size 6 KB —
Supply Voltage Range 1.65 V to 3.6 V 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR)
Betriebstemperaturbereich -40C to +85C -40 C to +125 C
Gehäuse 64-LQFP (10x10 mm) —
Pin-Anzahl 64 —
Montageart Surface Mount Surface Mount
USB Interface USB 2.0 FS, crystal-less —
ADC 1 x 12-bit 12-bit with hardware oversampling up to 16-bit resolution
DAC 2 x 12-bit 12-bit
LCD Controller Yes (up to 4x52 segments) —
I2C Interfaces 3 —
SPI Interfaces 2 —
USART/UART USART + UART —
Timers Multiple (16-bit and 32-bit) —
RTC Yes, with tamper detection —
Capacitive Touch S-Touch (TSEP) —
RoHS-Status Compliant —
Core Processor — ARM Cortex-M0+
Flash Memory Size — 64 KB (64K x 8)
SRAM Size — 8 KB
Gehäuse / Bauform — 64-LQFP (10x10 mm)
Anzahl der Pins — 64
USB Controller — USB 2.0 full-speed crystal-less device
Comparators — 2 ultra-low-power comparators
LCD Driver — Up to 8x28 segments
Communication Interfaces — I2C, SPI, USART
Run Mode Current — 84 uA/MHz (typical)
Standby Current with RTC — 0.29 uA (typical)
Number of GPIOs — [DATA_NEEDED: Number of GPIOs]
RoHS — Compliant

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern