STM32L476RET6 vs STM32L452RET6P Vergleich
Detaillierter Direktvergleich von STM32L476RET6 von STMicroelectronics und STM32L452RET6P von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32L476RET6 ✓ AktivSTMicroelectronics
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P ✓ AktivSpezifikationsvergleich
| Parameter | STM32L476RET6 | STM32L452RET6P |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,10 | $5,62 |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions | Arm Cortex-M4F with FPU and DSP |
| Maximale Taktfrequenz | 80 MHz | 80 MHz |
| Performance | 100 DMIPS (1.25 DMIPS/MHz) | — |
| Program Flash Memory | 512 KB | — |
| SRAM | 128 KB | 160 KB |
| Supply Voltage Range | 1.7 V to 3.6 V | 1.71 V to 3.6 V |
| Betriebstemperaturbereich | -40C to +85C (T6 suffix) | -40 C to +85 C or -40 C to +125 C (grade dependent) |
| Gehäuse | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| I/O Pins | 51 (5V-tolerant on FT pins) | — |
| ADC | 3x 12-bit, up to 5 Msps | — |
| DAC | 2x 12-bit | — |
| Comparators | 2x ultra-low-power | — |
| Operational Amplifiers | 2x on-chip | — |
| USB | USB 2.0 Full-Speed OTG (with internal PHY) | — |
| LCD Controller | 8x40 / 4x44 segments | — |
| Timers | 16-/32-bit, RTC, LPTIM, SysTick | — |
| Communication Interfaces | USART/UART, I2C, SPI, SAI, CAN 2.0B, SDMMC | — |
| Crypto / Random | AES-256 hardware, TRNG | — |
| DMA | DMA1 + DMA2 (14 channels total) | — |
| Internal SMPS | Yes (external 4.7 uH inductor) | — |
| RoHS-Status | Compliant | Compliant |
| DMIPS Performance | — | 100 DMIPS |
| Flash Memory | — | 512 KB |
| Shutdown Mode Current | — | 22 nA (5 wakeup pins) |
| VBAT Mode Current | — | 145 nA (RTC + 32x32-bit backup registers) |
| Montageart | — | Surface Mount |
| USB Interface | — | USB 2.0 Full-Speed Device with embedded PHY and DFS |
| ADC / DAC | — | 2x 12-bit ADC (5 Msps), 2x 12-bit DAC |
| Analog Peripherals | — | 2 op-amps, 2 comparators |
| Connectivity | — | CAN 2.0B, 2x I2C, 3x SPI, 4x USART, 2x UART, 1x LPUART |
| LCD Driver | — | Yes, up to 8x40 segments |
| Hardware Crypto | — | AES-256 |
| External SMPS | — | Yes (integrated SMPS step-down converter) |