TC78H660FNGEL vs TC78H660FTG Vergleich
Detaillierter Direktvergleich von TC78H660FNGEL von Toshiba und TC78H660FTG von Toshiba. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TC78H660FNGEL | TC78H660FTG |
|---|---|---|
| Marke | Toshiba | Toshiba |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $0,75 |
| Motor Type | Brushed DC (dual channel) / Stepper (bipolar) | Brushed DC (dual channel) / Bipolar Stepper |
| Number of H-Bridges | 2 | 2 |
| Output Transistor Technology | DMOS | — |
| Supply Voltage (VM) | 2.5 V to 18 V | — |
| Logic Supply Voltage (VCC) | 2.7 V to 5.5 V | — |
| Peak Output Current per Channel | 2.0 A | — |
| Continuous Output Current per Channel | 1.4 A | — |
| On-Resistance (HS+LS, typ.) | 0.5 ohm | — |
| Standby Current | 1 uA (typ.) | — |
| PWM Control Frequency | Up to 200 kHz | — |
| UVLO Threshold | [DATA_NEEDED: UVLO threshold value] | — |
| Thermisches Abschalten | Yes (TSD) | — |
| Overcurrent Shutdown | Yes (ISD) | — |
| Betriebstemperatur | -40 C to +85 C | -40 C to +85 C |
| Gehäuse | TSSOP-16 (with thermal pad) | VQFN-16 (3 x 3 mm) with exposed thermal pad |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 1 | 1 |
| RoHS-Status | Compliant | Compliant |
| Supply Voltage Range | — | 1.8 V to 18 V |
| Absolute Maximum VM | — | 20 V |
| Output Current (continuous, per channel) | — | [DATA_NEEDED: continuous current rating] |
| Output Current (peak) | — | 2 A |
| On-Resistance (HS + LS, typ.) | — | 0.6 ohm |
| PWM Frequency | — | Up to 200 kHz |
| Logic Input Voltage Levels | — | 1.8 V compatible |
| Protection Features | — | UVLO, ISD (Overcurrent), TSD (Thermal Shutdown) |
| Fault Output | — | MODE/ERR pin (open-drain active-low fault) |
| Thermal Resistance (theta JA, 4-layer PCB) | — | [DATA_NEEDED: theta JA value] |