THS1041CPW vs THS1041IDWR Vergleich
Detaillierter Direktvergleich von THS1041CPW von Texas Instruments und THS1041IDWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THS1041IDWR - 10-Bit 40MSPS Low-Power ADC w/ PGA | Texas Instruments
THS1041IDWR ✓ AktivSpezifikationsvergleich
| Parameter | THS1041CPW | THS1041IDWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Auflösung | 10 bit | 10 bit |
| Abtastrate | 40 MSPS | — |
| Input Channels | 1 channel | — |
| Architecture | Pipelined ADC | CMOS, pipelined |
| Analog Input Configuration | Differential and single-ended | — |
| Programmable Gain Amplifier | Integrated PGA | — |
| Internal Clamp | Internal precision clamp | — |
| Analog Supply Voltage | 3.0 V to 3.6 V | — |
| Digital Supply Voltage | 3.0 V to 3.6 V | — |
| Gehäuse | 28-pin TSSOP | 28-SOIC (DW) - 0.295 inch, 7.50 mm width |
| Montageart | Surface mount | Surface Mount |
| Sample-and-Hold | Integrated sample-and-hold circuit | — |
| Output Resolution Code Count | 1,024 codes | — |
| Conversion Architecture | Single-input pipeline converter | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (Industrial) |
| Eingangsspannungsbereich | [DATA_NEEDED: analog input voltage range] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Input Bandwidth | [DATA_NEEDED: input bandwidth] | — |
| Digital Interface | [DATA_NEEDED: digital interface] | — |
| Referenzspannung | [DATA_NEEDED: reference voltage] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Sample Rate | — | 40 MSPS |
| Versorgungsspannung | — | 3 V nominal |
| Power Dissipation | — | 55.5 mW at 40 MSPS |
| Input Configuration | — | Single-ended / Differential |
| Integrated PGA | — | Yes, programmable gain |
| Integrated Clamp | — | Analog clamp and programmable digital clamp |
| Input Type | — | Analog, DC or AC coupled |
| Reference | — | Internal |
| Output Interface | — | Parallel CMOS, 10-bit |
| MSL-Level | — | 1 (unlimited) |