THVD1400DR vs ADM485ARZ-REEL Vergleich
Detaillierter Direktvergleich von THVD1400DR von Texas Instruments und ADM485ARZ-REEL von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments
THVD1400DR ✓ AktivAnalog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ AktivSpezifikationsvergleich
| Parameter | THVD1400DR | ADM485ARZ-REEL |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $1,62 |
| Funktion | Transceiver | — |
| Protocol | RS-422, RS-485 | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | — |
| Datenrate | 500 kbps (max) | 5 Mbps (max) |
| Receiver Hysteresis | 50 mV (typ) | [DATA_NEEDED: receiver hysteresis] |
| Bus Common-Mode Voltage | -7 V to +12 V | — |
| ESD Protection (Bus Pins, HBM) | ±16 kV | — |
| ESD Protection (Bus Pins, IEC 61000-4-2 Contact) | ±12 kV | — |
| Unit Load | 1/8 (256 nodes max) | — |
| Betriebstemperatur | -40 °C to +125 °C | — |
| Gehäuse | 8-pin SOIC (SOIC-8, D suffix) | SOIC-8 (SO-8) / SO-8 |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Receiver Fail-Safe | Yes (open, short, idle bus) | — |
| Hot-Plug Support | Yes | — |
| Abschaltstrom | [DATA_NEEDED: shutdown current value] | — |
| Quiescent Current (typ) | [DATA_NEEDED: quiescent current value] | — |
| Type | — | Transceiver |
| Versorgungsspannung | — | 5 V (single supply) |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Betriebstemperaturbereich | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| REACH Status | — | Unaffected |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |