THVD1452D vs THVD1452DR Vergleich
Detaillierter Direktvergleich von THVD1452D von Texas Instruments und THVD1452DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI
THVD1452DR ✓ AktivSpezifikationsvergleich
| Parameter | THVD1452D | THVD1452DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,21 | $0,54 |
| Protocol | RS-485 | RS-422 / RS-485 |
| Number of Drivers/Receivers | 1/1 (Full-duplex) | 1/1 |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Datenrate | [DATA_NEEDED: maximum signaling rate in Mbps] | — |
| IEC ESD Protection (Bus Pins) | ±18 kV (IEC 61000-4-2 air discharge) | ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact |
| HBM ESD Protection | ±16 kV | ±16 kV (all pins, HBM) |
| Contact Discharge ESD | ±6 kV | — |
| IEC EFT Protection | Per IEC 61000-4-4 | — |
| Receiver Input Impedance | 1/8 unit load (≥ 96 kΩ) | — |
| Maximum Bus Nodes | 256 | — |
| Common-Mode Voltage Range | ±25 V | -7 V to +12 V |
| Fail-Safe Receiver | Yes (open, short, idle-bus) | — |
| Betriebstemperatur | -40 °C to +125 °C | -40°C to +125°C |
| Gehäuse | 14-pin SOIC (D) | SOIC-14 (D) |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| Thermisches Abschalten | Yes (with auto recovery) | — |
| Funktion | — | 1/1 Transceiver, full-duplex |
| Maximum Data Rate | — | 50 Mbps |
| Bus Unit Load | — | 1/8 UL (up to 256 nodes) |
| Receiver Fail-safe | — | True fail-safe (idle/short/open = logic high) |
| Quiescent Current (no load) | — | [DATA_NEEDED: Iq value] |
| MSL-Level | — | 1 (per TI product page) |
| Lead-free / Halogen-free | — | Yes / Yes |
| AEC-Q100 Automotive | — | Not applicable (no -Q1 suffix) |