THVD1510DR vs ADM485ARZ-REEL Vergleich
Detaillierter Direktvergleich von THVD1510DR von Texas Instruments und ADM485ARZ-REEL von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THVD1510DR - 5V RS-485 Transceiver, ±18kV ESD, SOIC-8 | Texas Instruments
THVD1510DR ✓ AktivAnalog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ AktivSpezifikationsvergleich
| Parameter | THVD1510DR | ADM485ARZ-REEL |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,05 | $1,62 |
| Product Type | RS-485/RS-422 Transceiver | — |
| Protocol | RS-485, RS-422 | RS-422, RS-485 |
| Configuration | 1 Driver / 1 Receiver (Half-Duplex) | — |
| Versorgungsspannung | 4.5 V to 5.5 V | 5 V (single supply) |
| Signaling Rate | up to 10 Mbps | — |
| IEC ESD Protection (Bus) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| HBM ESD Protection | ±16 kV (bus pins, per TI datasheet) | — |
| Common-Mode Range | ±25 V | -7 V to +12 V |
| Fault Tolerance | ±70 V (bus pins) | — |
| Receiver Unit Load | 1/8 UL (up to 256 nodes) | — |
| Receiver Type | True Fail-Safe | — |
| Quiescent Current (typ) | less than 1 mA | — |
| Betriebstemperatur | -40 C to +125 C | — |
| Gehäuse | SOIC-8 (D), 3.90 mm body width | SOIC-8 (SO-8) / SO-8 |
| Montageart | Surface Mount | Surface Mount |
| Pin-Anzahl | 8 | — |
| RoHS-Status | Compliant | Compliant |
| Type | — | Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Betriebstemperaturbereich | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| REACH Status | — | Unaffected |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |