TJA1052IT vs ISO1042DW Vergleich
Detaillierter Direktvergleich von TJA1052IT von NXP Semiconductors und ISO1042DW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TJA1052IT | ISO1042DW |
|---|---|---|
| Marke | NXP Semiconductors | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | Galvanically Isolated High-Speed CAN Transceiver | — |
| Datenrate | Up to 1 Mbit/s | — |
| Protocol | ISO 11898-2 (High-Speed CAN) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Isolation Type | Galvanic (integrated, reinforced) | Reinforced galvanic isolation |
| Supply Voltage - VCC (logic side) | 3 V to 5.25 V | — |
| Supply Voltage - VBUS (bus side) | 4.75 V to 7 V [DATA_NEEDED: exact VBUS range from datasheet] | — |
| Betriebstemperatur | -40 C to +125 C | — |
| Gehäuse / Bauform | 16-SOIC (SO-16, narrow body) | — |
| Montageart | Surface Mount | Surface mount |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value from datasheet] | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM ESD rating] | — |
| Loop Delay (typical) | [DATA_NEEDED: typical TX-to-RX loop delay] | — |
| Target Application | EV / HEV automotive high-voltage CAN | — |
| RoHS-Status | Compliant | — |
| AEC-Q100 | Qualified (automotive grade) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated CAN FD transceiver |
| Maximum CAN FD Data Rate | — | 5 Mbps |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| DC Bus Fault Protection | — | ±70 V DC |
| Common-Mode Voltage Range | — | ±30 V |
| Loop Delay | — | 152 ns |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| Gehäuse | — | 16-pin wide-body SOIC (DW) |
| Betriebstemperaturbereich | — | -40 °C to +125 °C |
| Bus-Side ESD Tolerance | — | HBM ESD protection; rating [DATA_NEEDED: HBM ESD voltage] |
| Transceiver Count | — | 1 transceiver |
| Logic-Side Supply | — | 1.8 V to 5.5 V |
| RoHS Compliance | — | [DATA_NEEDED: RoHS status] |
| REACH Compliance | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |