TJA1057GTJ vs SIT1044T Vergleich
Detaillierter Direktvergleich von TJA1057GTJ von NXP Semiconductors und SIT1044T von SIT. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TJA1057GTJ | SIT1044T |
|---|---|---|
| Marke | NXP Semiconductors | SIT |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,71 | $0,16 |
| Funktion | High-speed CAN transceiver | — |
| Datenrate | Up to 1 Mbit/s | — |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | ISO 11898-2 (CAN, CAN FD) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Betriebstemperatur | -40 °C to +150 °C | -40 °C to +125 °C |
| Gehäuse | 8-SO (SOIC-8, 3.9 mm body) | SOP-8 |
| Montageart | Surface Mount | — |
| Family | Mantis high-speed CAN | — |
| Modes | Normal, Standby | — |
| Bus Fault Protection | ±42 V typical (load dump) | ±40 V on CANH/CANL |
| ESD (HBM, bus pins) | ±8 kV typical | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Dominant Timeout | Yes (built-in) | — |
| RoHS-Status | Compliant | — |
| MSL-Level | 1 | — |
| Product Type | — | CAN FD Transceiver |
| Protocol Standard | — | ISO 11898-2:2016 (high-speed CAN) |
| Maximum Data Rate | — | 5 Mbps (CAN FD) |
| Supply Current (Dominant, typical) | — | 70 mA |
| Supply Current (Standby) | — | 30 µA |
| ESD Protection (HBM, bus pins) | — | ±8 kV |
| Low-Power Mode | — | Yes (standby with wake-up) |
| Wake-up Pin | — | Yes |
| TXD Dominant Time-out | — | Yes |
| Thermisches Abschalten | — | Yes |
| Undervoltage Protection | — | Yes |
| RoHS | — | Compliant |