TLD21313EPXUMA1 vs TLD1211SJFUMA1 Vergleich
Detaillierter Direktvergleich von TLD21313EPXUMA1 von Infineon und TLD1211SJFUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
TLD21313EPXUMA1 - 3-Ch 60mA LED Driver, 40V LITIX Linear | Infineon
TLD21313EPXUMA1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | TLD21313EPXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | LED Drivers | LED Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,98 | $0,33 |
| Topologie | Linear Current Source / Sink | Linear Constant-Current |
| Anzahl der Ausgänge | 3 | 1 |
| Output Current per Channel | 60 mA (typical) | — |
| Eingangsspannungsbereich | 5.5 V to 40 V | — |
| Output Current Accuracy | 5% | — |
| Dimming Method | Built-in PWM | — |
| Betriebstemperaturbereich | -40 C to +150 C | -40 C to +150 C (junction) |
| Gehäuse | PG-TSDSO-14 (TSSOP-14-EP, 150 mil) | PG-DSO-8-16 (8-pin, exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | AEC-Q100 targeted (Automotive Grade) |
| Thermal Protection | Thermal Shutdown with Auto-Recovery | — |
| Diagnostic Features | Open-load / short-to-GND detection (per datasheet) | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| PWM Dimming Frequency Range | [DATA_NEEDED: PWM dimming frequency] | — |
| Product Type | — | Linear LED Driver IC |
| Maximaler Ausgangsstrom | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |