TLD5097EPXUMA1 vs TLD1211SJFUMA1 Vergleich
Detaillierter Direktvergleich von TLD5097EPXUMA1 von Infineon und TLD1211SJFUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLD5097EPXUMA1 | TLD1211SJFUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | LED Drivers | LED Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,90 | $0,33 |
| Topology Support | Boost, Buck, Buck-Boost, SEPIC, Flyback | — |
| Eingangsspannungsbereich | 4.5 V to 45 V | — |
| Switching Frequency Range | 100 kHz to 500 kHz | — |
| Gate Drive Output Current | 90 mA | — |
| Anzahl der Ausgänge | 1 | 1 |
| Dimming Method | Analog and PWM | — |
| LED Current Tolerance | 3.3% | — |
| Betriebstemperaturbereich | -40 C to +150 C | -40 C to +150 C (junction) |
| Gehäuse | PG-TSDSO-14 (14-TSSOP with exposed pad) | PG-DSO-8-16 (8-pin, exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Internal Switch | No (external MOSFET driver) | — |
| Short Circuit Protection | Yes | — |
| Open LED Detection | Yes | — |
| Over-Temperature Protection | Yes | — |
| RoHS-Status | Compliant | Compliant |
| Product Type | — | Linear LED Driver IC |
| Topologie | — | Linear Constant-Current |
| Maximaler Ausgangsstrom | — | 85 mA |
| Supply Voltage Range (Vs) | — | 5.5 V to 28 V |
| Load-Dump Tolerance | — | 40 V |
| Dimming Interface | — | PWM via EN pin (CMOS/TTL) |
| EN High-Level Voltage (V_EN,ON) | — | 1 V to 5.5 V |
| EN Low-Level Voltage (V_EN,OFF) | — | -0.3 V to 0.3 V |
| EN Input Current (I_EN) | — | 60 to 130 uA (V_EN = 5 V) |
| Sense Voltage (Vsense) | — | Programmed by external resistor |
| Drop Voltage (Vs - Vout) | — | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) |
| Automotive Qualification | — | AEC-Q100 targeted (Automotive Grade) |