TLD700216ESXUMA1 vs ITS4090QEPDXUMA1 Vergleich
Detaillierter Direktvergleich von TLD700216ESXUMA1 von Infineon und ITS4090QEPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLD700216ESXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | LED Drivers | Power Distribution Switches |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,18 | $1,62 |
| Product Type | Linear LED Driver IC | Quad-Channel Smart High-Side Power Switch |
| Number of Output Channels | 16 | — |
| Maximum Output Current per Channel | 76.5 mA | — |
| PWM Dimming Resolution | 14-bit (16384 steps) | — |
| Analog Dimming | Yes (current setting via ISET) | — |
| Supply Voltage Range (VS) | 6 V to 20 V | — |
| Load Dump Tolerance | 40 V | — |
| Communication Interface | SPI with daisy-chain | — |
| Betriebstemperaturbereich | -40 C to +125 C | -40 °C to +150 °C (Tj) |
| Gehäuse | PG-TSDSO-24-5 (TSSOP-24-EP, 150 mil) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Topologie | Linear constant-current sink | High-Side Switch (N-Channel DMOS) |
| Diagnostic Features | Open-load, short-to-GND, short-to-VS, overtemperature | — |
| Functional Safety | ISO 26262 ASIL-B capable | — |
| RoHS-Status | Compliant | Compliant |
| Family | LITIX Pixel Rear | PROFET (PROtected FET) 24V/48V |
| Number of Channels | — | 4 |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |