TLE75004EPDXUMA1 vs ITS4090QEPDXUMA1 Vergleich
Detaillierter Direktvergleich von TLE75004EPDXUMA1 von Infineon und ITS4090QEPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE75004EPDXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power Distribution Switches |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,93 | $1,62 |
| Product Type | Low-side power switch | Quad-Channel Smart High-Side Power Switch |
| Number of Channels | 4 | 4 |
| On-State Resistance (Rdson) per Channel | [DATA_NEEDED: Rdson per channel] | — |
| Continuous Drain Current per Channel | 470 mA | — |
| Load Voltage (Vbb) | [DATA_NEEDED: Vbb max] | — |
| Anzahl der Ausgänge | 4 | — |
| Input Type | SPI (16-bit) + parallel input pins | — |
| SPI Clock Frequency | up to 5 MHz | — |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 °C to +150 °C (Tj) |
| Gehäuse | PG-TSDSO-14-41 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2A | [DATA_NEEDED: MSL rating] |
| Terminal Finish | Tin (Sn) | — |
| JEDEC / JESD-609 | e3 | — |
| Qualification | AEC-Q100 | — |
| Special Features | 3 V cranking, Limp Home (fail-safe) mode, open-load detection | — |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Topologie | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |
| RoHS-Status | — | Compliant |