TLE75004EPDXUMA1 vs TLE75080ESDXUMA1 Vergleich
Detaillierter Direktvergleich von TLE75004EPDXUMA1 von Infineon und TLE75080ESDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE75004EPDXUMA1 | TLE75080ESDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,93 | $2,55 |
| Product Type | Low-side power switch | — |
| Number of Channels | 4 | 8 |
| On-State Resistance (Rdson) per Channel | [DATA_NEEDED: Rdson per channel] | — |
| Continuous Drain Current per Channel | 470 mA | — |
| Load Voltage (Vbb) | [DATA_NEEDED: Vbb max] | — |
| Anzahl der Ausgänge | 4 | — |
| Input Type | SPI (16-bit) + parallel input pins | — |
| SPI Clock Frequency | up to 5 MHz | — |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 C to +150 C |
| Gehäuse | PG-TSDSO-14-41 (exposed pad) | PG-TSDSO-24-21 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2A | 2A |
| Terminal Finish | Tin (Sn) | — |
| JEDEC / JESD-609 | e3 | — |
| Qualification | AEC-Q100 | — |
| Special Features | 3 V cranking, Limp Home (fail-safe) mode, open-load detection | — |
| Channel Configuration | — | High-side, N-channel MOSFET |
| Per-Channel Output Current | — | 330 mA |
| Supply Voltage Range | — | 4.5 V to 28 V |
| Load Dump Tolerance | — | 40 V |
| Cranking Voltage (Limp Home) | — | 3.0 V |
| On-State Resistance (typ per channel) | — | 1.5 ohm |
| Communication Interface | — | 16-bit SPI (daisy-chain capable) |
| Diagnostic Features | — | Open-load detect (on/off), overcurrent, overtemperature, short to battery/GND |
| Protection Functions | — | Reverse battery, load dump, thermal shutdown, current limit |
| RoHS-Status | — | Compliant |