TLE75004EPDXUMA1 vs TLE94713ESV33XUMA1 Vergleich
Detaillierter Direktvergleich von TLE75004EPDXUMA1 von Infineon und TLE94713ESV33XUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE75004EPDXUMA1 | TLE94713ESV33XUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Voltage Regulators |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,93 | $2,31 |
| Product Type | Low-side power switch | Lite System Basis Chip (Lite SBC) |
| Number of Channels | 4 | — |
| On-State Resistance (Rdson) per Channel | [DATA_NEEDED: Rdson per channel] | — |
| Continuous Drain Current per Channel | 470 mA | — |
| Load Voltage (Vbb) | [DATA_NEEDED: Vbb max] | — |
| Anzahl der Ausgänge | 4 | — |
| Input Type | SPI (16-bit) + parallel input pins | — |
| SPI Clock Frequency | up to 5 MHz | — |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 C to +125 C (automotive grade) |
| Gehäuse | PG-TSDSO-14-41 (exposed pad) | PG-TSDSO-24-1 (TSSOP-24 EP) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2A | [DATA_NEEDED: MSL rating] |
| Terminal Finish | Tin (Sn) | — |
| JEDEC / JESD-609 | e3 | — |
| Qualification | AEC-Q100 | — |
| Special Features | 3 V cranking, Limp Home (fail-safe) mode, open-load detection | — |
| Main LDO Output Voltage | — | 5 V |
| Main LDO Output Current | — | 200 mA (typical) |
| Second LDO Output Voltage | — | 5 V (sensor supply, off-board protected) |
| Second LDO Output Current | — | 100 mA (typical) |
| Eingangsspannungsbereich | — | 5.5 V to 28 V (load-dump tolerant) |
| CAN Data Rate | — | Up to 5 Mbps (CAN FD) |
| CAN Standard | — | ISO 11898-1:2015 |
| Communication Interface | — | 16-bit SPI |
| RoHS-Status | — | Compliant |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |