TLE9104SHXUMA1 vs ITS4100SSJNXUMA1 Vergleich
Detaillierter Direktvergleich von TLE9104SHXUMA1 von Infineon und ITS4100SSJNXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE9104SHXUMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,72 | $0,89 |
| Product Type | Multi-Channel Low-Side Power Switch | High-Side Power Switch |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | 1:1 N-Channel High-Side |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | — |
| Gehäuse | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-8 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Overload Protection | — | Yes |
| Current Limitation | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| Betriebstemperaturbereich | — | [DATA_NEEDED: Tj range] |
| RoHS-Status | — | Compliant |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |