TLE94110ESXUMA1 vs TLE75602ESHXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94110ESXUMA1 von Infineon und TLE75602ESHXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE94110ESXUMA1 | TLE75602ESHXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,45 | $2,95 |
| Product Type | Multi half-bridge DC motor driver | 8-channel SPI power switch (low-side / high-side) |
| Number of Half-Bridges | 10 (configurable to 3, 4, 6, 8, 10, or 12 via output paralleling) | — |
| Supply Voltage Range | 5.5 V to 20 V | — |
| Maximum Output Current per Channel | 1.5 A (typical), 2 A peak (per RS listing) | — |
| Output Stage | Integrated N-channel DMOS half-bridges | — |
| Control Interface | 16-bit SPI (daisy-chain capable) or direct input (DI) | — |
| PWM Generation | Integrated, with adjustable dead time | Configurable per channel, on-chip |
| Open-Load Detection | Yes, adjustable threshold on two outputs | — |
| Short-Circuit Protection | Yes | — |
| Overtemperature Protection | Yes (thermal shutdown) | — |
| Undervoltage Lockout | Yes | — |
| Betriebstemperaturbereich | -40 C to +150 C | — |
| Gehäuse | PG-TSDSO-24 (24-pin, exposed thermal pad) | PG-TSDSO-24-21 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Moisture Sensitivity Level | MSL 2A | — |
| RoHS-Status | Compliant | Compliant |
| Number of Channels | — | 8 |
| Per-channel Output Current | — | 330 mA |
| Switch Configuration | — | 1:8 N-Channel |
| Operating Voltage Range | — | 4.5 V to 28 V (supports 3.0 V cranking) |
| Schnittstelle | — | 16-bit SPI |
| Rds(on) per channel | — | [DATA_NEEDED: typical Rds(on) per channel] |
| Betriebstemperatur | — | -40 C to +150 C (junction, AEC-Q100 automotive grade) |
| AEC-Q100 Qualified | — | Yes |
| Diagnostic Features | — | Open-load detect, short-to-battery, short-to-ground, overtemperature, current sense |
| Reverse Battery Protection | — | Via external resistor |
| Load Dump Protection | — | Yes |