TLE94110ESXUMA1 vs TLE8366EVXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94110ESXUMA1 von Infineon und TLE8366EVXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE94110ESXUMA1 | TLE8366EVXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | DC-DC Converters |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,45 | $1,18 |
| Product Type | Multi half-bridge DC motor driver | — |
| Number of Half-Bridges | 10 (configurable to 3, 4, 6, 8, 10, or 12 via output paralleling) | — |
| Supply Voltage Range | 5.5 V to 20 V | — |
| Maximum Output Current per Channel | 1.5 A (typical), 2 A peak (per RS listing) | — |
| Output Stage | Integrated N-channel DMOS half-bridges | — |
| Control Interface | 16-bit SPI (daisy-chain capable) or direct input (DI) | — |
| PWM Generation | Integrated, with adjustable dead time | — |
| Open-Load Detection | Yes, adjustable threshold on two outputs | — |
| Short-Circuit Protection | Yes | — |
| Overtemperature Protection | Yes (thermal shutdown) | — |
| Undervoltage Lockout | Yes | — |
| Betriebstemperaturbereich | -40 C to +150 C | — |
| Gehäuse | PG-TSDSO-24 (24-pin, exposed thermal pad) | PG-DSO-8 with Exposed Pad (3.90 mm body width) |
| Montageart | Surface Mount | Surface Mount |
| Moisture Sensitivity Level | MSL 2A | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | Buck (Step-Down) Synchronous PWM |
| Eingangsspannungsbereich | — | 4.75 V to 45 V |
| Ausgangsspannungsbereich | — | 0.6 V to 16 V (adjustable) |
| Output Current | — | 1.8 A |
| Referenzspannung | — | 0.6 V (feedback) |
| Quiescent Current (Shutdown) | — | < 2 µA |
| Control Method | — | Current-Mode PWM |
| Strombegrenzung | — | Cycle-by-cycle |
| Protection Features | — | Over-temperature shutdown, Input UVLO, Cycle-by-cycle current limit |
| Enable-Pin | — | Yes (active-high, shutdown < 2 µA) |
| Operating Temperature (Junction) | — | -40 °C to +150 °C (automotive) |
| MSL-Level | — | MSL per JEDEC J-STD-020 (verify per reel label) |
| Automotive Qualified | — | Yes (AEC-Q100 grade targeted, automotive use) |