TLE94112ESXUMA1 vs TLE9104SHXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94112ESXUMA1 von Infineon und TLE9104SHXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE94112ESXUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,10 | $3,72 |
| Ausgangskonfiguration | 12 half-bridge drivers | — |
| Anzahl der Ausgänge | 12 | — |
| Output Current per Channel | 0.9 A (typical, see datasheet) | — |
| Supply Voltage VS | 5.5 V to 18 V | — |
| Load-Dump Tolerance | Up to 40 V (per family datasheet) | — |
| Schnittstelle | SPI (daisy-chainable up to 16 devices) | — |
| Topology Support | Half-bridge, full-bridge, parallel outputs | — |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Betriebstemperatur | -40 C to +150 C | -40 °C to +150 °C (junction) |
| Protection Features | Over-temperature, over-current, open-load, short to GND/VBAT | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Gehäuse | PG-TSDSO-24 (exposed pad) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | MSL3 (per JEDEC J-STD-020) |
| Standard Pack Quantity | 3000 (Tape & Reel) | — |
| Application Family | TLE94xyz DC motor driver family | — |
| Product Type | — | Multi-Channel Low-Side Power Switch |
| Number of Channels | — | 4 |
| Load Current per Channel | — | 3 A (continuous) |
| Topologie | — | 1:1 N-Channel Low-Side Switch |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |