TLS205B0LDV50XUMA1 vs TLS115D0LDXUMA1 Vergleich
Detaillierter Direktvergleich von TLS205B0LDV50XUMA1 von Infineon und TLS115D0LDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLS205B0LDV50XUMA1 | TLS115D0LDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Voltage Regulators | Voltage Regulators |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,71 | $1,21 |
| Regulator Type | LDO (Low-Dropout), Positive Fixed | — |
| Ausgangsspannung | 5.0 V (fixed) | 2.0 V (tracking ratio set by external resistors) |
| Output Current (Maximum) | 500 mA | — |
| Eingangsspannungsbereich | 5.5 V to 20 V | [DATA_NEEDED: input voltage range from datasheet] |
| Dropout Voltage (Typical) | 350 mV at 500 mA | — |
| Dropout Voltage (Maximum) | 480 mV at 500 mA | — |
| Quiescent Current (Typical) | 60 µA | — |
| Anzahl der Ausgänge | 1 | 1 |
| Ausgangstyp | Fixed | Adjustable (Tracking) |
| Betriebstemperaturbereich | -40 °C to +125 °C | — |
| Gehäuse | PG-TSON-10-2 | PG-TSON-10 (TSON-10 exposed pad) |
| Montagestil | SMD/SMT | — |
| Line Regulation | [DATA_NEEDED: line regulation] | — |
| Load Regulation | [DATA_NEEDED: load regulation] | — |
| Ausgangsrauschen | [DATA_NEEDED: output noise (uVrms)] | — |
| PSRR | [DATA_NEEDED: PSRR at 1 kHz] | — |
| Output Capacitor Requirement | Ceramic, low-ESR | — |
| Protection Features | Thermal Shutdown, Overcurrent Limit | — |
| AEC-Q100 | Qualified (automotive grade) | — |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Maximaler Ausgangsstrom | — | 150 mA |
| Dropout-Spannung | — | 200 mV (typical, at 150 mA) |
| Ruhestrom | — | [DATA_NEEDED: quiescent current from datasheet] |
| Enable-Pin | — | Yes |
| Power-Good-Ausgang | — | Yes |
| Reverse Polarity Protection | — | Yes (integrated) |
| Betriebstemperatur | — | -40C to +125C (automotive grade) |
| Montageart | — | Surface Mount |
| Automotive Qualification | — | AEC-Q100 |
| Series | — | OPTIREG Linear |