TS934IN vs TS934ID Vergleich
Detaillierter Direktvergleich von TS934IN von STMicroelectronics und TS934ID von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
TS934ID - 4-Channel 2.7V R-R Micropower Op Amp | STMicroelectronics
TS934ID ObsoleteSpezifikationsvergleich
| Parameter | TS934IN | TS934ID |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Obsolete |
| Amplifier Type | Dual operational amplifier | General-purpose operational amplifier |
| Topologie | Rail-to-rail output | — |
| Input Type | CMOS input | — |
| Supply Voltage Minimum | 2.7 V | — |
| Supply Voltage Maximum | 10 V | — |
| Versorgungsstrom | 20 µA | — |
| Gain-Bandwidth Product | 100 kHz | 100kHz |
| Output Swing | 2.9 Vpp with RL = 100 kΩ at 2.7 V supply | — |
| Input Bias Current | 1 pA | 1pA typical |
| Number of Circuits | 2 | — |
| Gehäuse | 14-DIP | 14-SOIC, 0.154 inch width, 3.90mm width |
| Montageart | Through-hole | Surface Mount |
| ESD Protection | Yes | Present according to supplied TS93x family description |
| Single-Supply Operation | Yes | Yes |
| Output Rail-to-Rail | Yes | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40C to +105C |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Amplifiers | — | 4 circuits |
| Supply Voltage Range | — | 2.7V to 10V |
| Ausgangstyp | — | Rail-to-rail output |
| Slew Rate | — | 0.05V/us |
| Typical Supply Current | — | 20uA |
| Output Voltage Swing | — | 2.9Vpp at 3V supply with 100kohm load |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Automotive Grade | — | Not indicated in supplied data |
| REACH Status | — | [DATA_NEEDED: REACH status] |