UCC21530QDWKRQ1 vs UCC21739QDWRQ1 Vergleich
Detaillierter Direktvergleich von UCC21530QDWKRQ1 von Texas Instruments und UCC21739QDWRQ1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
UCC21530QDWKRQ1 - 4A/6A 5.7kVrms Isolated Gate Driver | TI
UCC21530QDWKRQ1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | UCC21530QDWKRQ1 | UCC21739QDWRQ1 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,07 | $4,52 |
| Funktion | Isolated dual-channel gate driver | — |
| Number of Channels | 2 (high-side / low-side) | — |
| Peak Source Current | 4 A | — |
| Peak Sink Current | 6 A | — |
| Isolation Voltage (RMS) | 5.7 kVRMS | — |
| Channel-to-Channel Spacing | 3.3 mm (minimum) | — |
| Creepage / Clearance | 8.5 mm (DWK wide-body) | — |
| VDD/VDDA Supply Range | 18 V to 25 V (3 V to 18 V on logic side per datasheet) | — |
| Propagation Delay (Typical) | 33 ns | — |
| Maximum Operating Frequency | 5 MHz | — |
| Common-Mode Transient Immunity (CMTI) | 100 V/ns (minimum) | 100 kV/us minimum |
| Programmable Deadtime | Yes (DT pin) | — |
| Enable-Pin | Yes (active-low) | — |
| Betriebstemperaturbereich | -40C to +125C | -40C to +150C (junction) |
| Gehäuse | 14-pin SOIC (DWK wide-body) | 16-SOIC wide-body (DWR, 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 | — |
| AEC-Q100 Qualification | Qualified | — |
| RoHS-Status | Compliant | — |
| Logic Input Compatibility | CMOS / TTL | — |
| Product Type | — | Isolated single-channel gate driver |
| Peak Source/Sink Output Current | — | ±10 A |
| Working Voltage (DC link) | — | Up to 990 V DC |
| Isolation Voltage | — | 3000 V RMS |
| Rise Time (typical) | — | 33 ns |
| Fall Time (typical) | — | 27 ns |
| Miller Clamp Current | — | 4.5 A |
| DESAT Response Time (typical) | — | 9 us |
| Propagation Delay (typical) | — | [DATA_NEEDED: propagation delay] |
| Supply Voltage (VDD/VCC) | — | 3 V to 5.5 V (logic side), up to 33 V (output side) |
| Isolation Technology | — | SiO2 capacitive |
| Automotive Qualification | — | AEC-Q100 qualified (Q1 suffix) |
| Integrated Analog Sense Output | — | Yes (isolated) |