VNH7070ASTR vs VNH9030AQ Vergleich
Detaillierter Direktvergleich von VNH7070ASTR von STMicroelectronics und VNH9030AQ von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
VNH7070ASTR - 15A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH7070ASTR ✓ AktivSTMicroelectronics
VNH9030AQ - 30A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH9030AQ ✓ AktivSpezifikationsvergleich
| Parameter | VNH7070ASTR | VNH9030AQ |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,16 | $5,44 |
| Motor Type | DC brushed motor | — |
| Ausgangskonfiguration | Full H-bridge (dual high-side + dual low-side) | — |
| Supply Voltage (VCC) | 4 V to 28 V | — |
| Continuous Output Current | 15 A | — |
| On-State Resistance per Switch (Ron) | 40 mOhm (typical) | — |
| PWM Frequency (max) | 20 kHz | — |
| Logic Input Compatibility | 3.3 V and 5 V CMOS | — |
| Current Sense Output (CS) | Analog proportional voltage | — |
| Diagnostic Output (DIAG) | Active-high fault flag | — |
| Protection Features | UVLO, overvoltage clamp, thermal shutdown, short-circuit, open-load | — |
| Betriebstemperatur | -40 C to +150 C (junction) | — |
| Gehäuse | SO-16N (MultiWatt-15 derivative, exposed pad) | VFQFPN-32 (5x5 mm) |
| Montageart | Surface Mount | Surface Mount |
| Technology | VIPower M0-7 | — |
| MSL-Level | 3 | — |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Output Current (Continuous) | — | 30 A |
| Supply Voltage Range | — | 4 V to 28 V |
| On-Resistance (per switch) | — | 25 mOhm |
| PWM Frequency | — | Up to 20 kHz |
| Betriebstemperaturbereich | — | -40C to +150C |
| Number of Channels | — | 1 (H-bridge) |
| Control Interface | — | PWM, IN1, IN2 |
| Diagnostic Output | — | Yes (open-drain) |
| Current Sense Output | — | Yes (analog) |
| Undervoltage Lockout | — | Yes |
| Überstromschutz | — | Yes |
| Thermisches Abschalten | — | Yes |
| AEC-Q100 Qualified | — | Yes |