10MQ060NTRPBF - 60V 1A Schottky Rectifier SMA | Vishay
Teilenummer: 10MQ060NTRPBF ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0.62 | $0,62 |
| 10 | $0.55 | $5,50 |
| 100 | $0.42 | $42,00 |
| 500 | $0.34 | $170,00 |
| 1.000 | $0.27 | $270,00 |
| 7.500 | $0.21 | $1.575,00 |
10MQ060NTRPBF Übersicht
A Schottky rectifier is a semiconductor diode that uses a metal-semiconductor junction instead of a p-n junction, producing a lower forward voltage drop and essentially zero reverse recovery time. This makes Schottky diodes ideal for high-frequency switching power conversion, where rectifier losses dominate efficiency. Within the discrete semiconductor hierarchy, the 10MQ060NTRPBF belongs to the Schottky rectifier family, which sits under rectifier diodes, then discrete semiconductors. The PBF suffix indicates a lead-free, RoHS-compliant matte-tin-plated terminal finish compatible with lead-free reflow profiles.
Key features include a peak repetitive reverse voltage (VRRM) of 60 V, an average rectified forward current of 1 A, low forward voltage drop of 620 mV typical at 2.1 A, and a guard-ring structure for enhanced ruggedness and long-term reliability. The device also meets MSL level 1 per J-STD-020, is halogen-free according to IEC 61249-2-21, and is supplied on 7-inch tape-and-reel with 7,500-piece reels, enabling high-volume automated assembly.
The 10MQ060NTRPBF uses a single-junction Schottky die in a DO-214AC (SMA) outline, the industry-standard footprint for 1 A surface-mount rectifiers. Its guard ring suppresses edge breakdown under reverse-bias stress, improving avalanche robustness. The lack of reverse recovery charge makes it suitable for continuous-conduction-mode boost and buck converters operating in the hundreds of kHz.
Typical applications include disk drive power conditioning, switching power supply output rectifiers, DC-DC converters, freewheeling diodes across inductive loads, battery charging rectifiers, and reverse-battery protection circuits. Designers favor this part where efficiency and small PCB area are critical.
When designing with the 10MQ060NTRPBF, ensure the PCB land pattern follows the SMA (DO-214AC) recommendation with adequate thermal copper to keep the junction below 150 C at full load. Verify that peak inverse voltage never exceeds 60 V, including transient ringing from the input source.
This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not found in the standalone manufacturer datasheet.
Drop-in-Alternativen für 10MQ060NTRPBF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
VS-10MQ060NTRPBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
B160-E3/61T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
VS-10MQ060-M3/6AT
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SS16-E3/61T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MBRS160T3G
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CMSH1-60HE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
10MQ060NTRPBF Grenzwerte & elektrische Eigenschaften
| Diode Type | Schottky Rectifier |
| Configuration | Single |
| Maximum DC Reverse Voltage (Vr) | 60 V |
| Maximum Average Rectified Forward Current (Io) | 1 A (per Vishay datasheet) |
| Forward Voltage (Vf) Max @ If | 620 mV @ 2.1 A |
| Forward Voltage (Vf) Typ @ If | 710 mV @ 1.5 A (per datasheet snippet) |
| Reverse Recovery Time (trr) | Not applicable (Schottky) |
| Betriebs-Sperrschichttemperatur | -40 C to +150 C (per datasheet) |
| Gehäuse / Bauform | DO-214AC (SMA) |
| Montageart | Surface Mount |
| Anzahl der Pins | 2 |
| MSL-Level | 1 (per J-STD-020, LF maximum) |
| RoHS-Status | Compliant |
| Halogen-Free Status | Halogen-free per IEC 61249-2-21 |
| Terminal Finish | Lead-free matte tin (Pb-free PBF) |
10MQ060NTRPBF Pin-Konfiguration
| Pin 1 | Cathode (K) — Marked with cathode band on body; connected to positive output in a rectifier configuration |
| Pin 2 | Anode (A) — Anode terminal; connected to positive input in a rectifier configuration |
Typische Anwendungen
10MQ060NTRPBF ist geeignet für 6 Anwendungs: Switching Power Supply Output Rectification, DC-DC Converter Freewheeling Diode, Reverse Battery Protection, Disk Drive Power Conditioning, Battery Charging Rectifier, Industrial Control Panel Power Rail.
Switching Power Supply Output Rectification
The 10MQ060NTRPBF serves as a low-loss output rectifier in 12 V and 24 V buck-derived switching power supplies. Its 620 mV forward voltage drop at 2.1 A keeps rectification loss below 1% at full load, while the zero reverse recovery charge eliminates the reverse current spike that would otherwise force designers to add an RC snubber. In a 100 kHz buck converter delivering 5 V at 1 A, the Schottky rectifier contributes roughly 0.6 W of dissipation, well within the SMA package's 1 W continuous rating. The 60 V reverse rating provides ample margin above the 24 V input rail, even after accounting for inductive ringing on the switching node.
Empfohlen
DC-DC Converter Freewheeling Diode
In boost and buck-boost converters, the 10MQ060NTRPBF acts as the freewheeling (catch) diode that conducts inductor current when the main switch turns off. Its near-zero reverse recovery time is critical at high switching frequencies (100 kHz to 1 MHz) because any reverse current creates switching losses and voltage transients. With a 60 V Vr rating it handles 24 V and 36 V industrial bus rails comfortably. At 1 A continuous and 2.1 A peak, the device pairs naturally with 1 A-class inductor values (22 uH to 100 uH) typical of POL (point-of-load) converters supplying MCUs and FPGAs.
Empfohlen
Reverse Battery Protection
The 10MQ060NTRPBF is well suited to reverse-battery protection in 12 V and 24 V systems, where a Schottky rectifier placed in series with the load prevents reverse-polarity damage. Its 620 mV forward drop is acceptable for non-ultra-low-power designs, and the 60 V reverse rating far exceeds typical automotive load-dump transients (35-40 V). For ultra-low-voltage-drop applications, pair this part with an N-channel MOSFET in a smart-ORing topology. The SMA package allows the diode to sit on the same PCB footprint as a MOSFET solution with minimal board rework.
Empfohlen
Disk Drive Power Conditioning
The 10MQ060NTRPBF's original application was power conditioning in 3.5-inch and 2.5-inch disk drives, where it rectified the +5 V and +12 V rails inside the spindle motor and actuator assemblies. In modern HDDs the +12 V supply still requires bulk rectification downstream of the switching regulator, and the 10MQ060NTRPBF handles this role with its 60 V reverse headroom and 1 A continuous rating. Its small SMA footprint is critical in the confined drive housing, and the guard-ring construction provides the long-term reliability demanded by 24/7 datacenter operation.
Empfohlen
Battery Charging Rectifier
For low-current lithium-ion and lead-acid battery chargers in the 0.5 A to 1 A range, the 10MQ060NTRPBF serves as a blocking rectifier on the charger output. Its low forward drop improves charge efficiency and reduces heat dissipation in the charger housing. The 60 V reverse rating ensures the diode blocks the battery voltage when the charger is disconnected, eliminating back-feed paths. Combined with a current-sense resistor and a CC/CV controller IC, the 10MQ060NTRPBF enables a compact, efficient charger design for portable equipment, e-bike accessories, and emergency lighting.
Empfohlen
Industrial Control Panel Power Rail
In industrial PLC and HMI power supplies, the 10MQ060NTRPBF rectifies the 24 V auxiliary rail feeding relays, optocouplers, and signal-conditioning circuits. Its 60 V Vr rating tolerates the 36 V industrial bus voltage and any inductive kickback from relay coils, while the 1 A continuous current handles multi-relay loads. The SMA package's small footprint simplifies dense PCB layouts inside DIN-rail enclosures, and its -40 C to +150 C junction temperature range supports outdoor and unconditioned industrial environments. Designers value its guard-ring construction for the long-term reliability demanded by 10-year industrial service intervals.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für 10MQ060NTRPBF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | VS-10MQ060NTRPBF | B160-E3/61T | SS16-E3/61T | MBRS160T3G | CMSH1-60HE |
|---|---|---|---|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | onsemi | Central Semiconductor |
| Package | DO-214AC (SMA) | DO-214AC (SMA) - same | DO-214AC (SMA) - same | DO-214AC (SMA) - same | DO-214AC (SMA) - same | DO-214AC (SMA) - same |
| Maximum DC Reverse Voltage (Vr) | 60 V | 60 V | 60 V | 60 V | 60 V | 60 V |
| Maximum Average Rectified Current (Io) | 1 A | 1 A | 1 A | 1 A | 1 A | 1 A |
| Forward Voltage (Vf) Typ @ 1-1.5 A | 620 mV @ 2.1 A / 710 mV @ 1.5 A | 620 mV @ 2.1 A | ~500 mV @ 1 A (lower) | ~700 mV @ 1 A | ~500 mV @ 1 A | ~700 mV @ 1 A |
| Reverse Recovery Time | Zero (Schottky) | Zero (Schottky) | Zero (Schottky) | Zero (Schottky) | Zero (Schottky) | Zero (Schottky) |
| MSL Level | 1 (per J-STD-020) | 1 | 1 | 1 | 1 | 1 |
| RoHS / Lead-Free | Yes (Pb-free PBF) | Yes | Yes | Yes | Yes | Yes |
| Approximate Unit Price @ 1k | $0.27 | $0.27 | $0.18 | $0.15 | $0.18 | $0.30 |
Wichtigste Unterscheidungsmerkmale
- Guard-ring construction for long-term reliability (vs. MBRS160T3G (onsemi))
- Lower forward voltage at high current vs standard SS16 (vs. SS16-E3/61T (Vishay))
- MSL 1 rating simplifies assembly (vs. CMSH1-60HE (Central Semiconductor))
Designhinweise
At 1 A continuous forward current the 10MQ060NTRPBF dissipates approximately 0.62 W with its 620 mV Vf. On a JEDEC EIA-407 test board (1 oz copper, 1 square inch pad) the SMA package's theta_JA is around 50-80 C/W, giving a junction rise of 30-50 C above ambient. Estimated: at 25 C ambient the junction sits near 55-75 C; at 85 C industrial ambient the junction rises to 115-140 C. Below 1 A continuous no heatsink is needed, but for sustained 2.1 A operation the copper area should grow to 2 square inches or an external heatsink added.
Use the standard SMA (DO-214AC) land pattern: cathode pad 2.5 mm x 1.8 mm, anode pad 2.5 mm x 1.8 mm, with 1.0 mm gap between pads. Solder the exposed bottom thermal pad (if present on the specific variant) to a copper pour on the top side for maximum heat spreading. Avoid running high-current traces under the package body, and route the input and output traces orthogonally to minimize stray inductance.
Do not exceed 60 V reverse voltage, including transient ringing. The 10MQ060NTRPBF has zero reverse recovery charge, but in a buck converter the Schottky's junction capacitance (typically 50-100 pF at 4 V reverse) can still create switching transients. Add a 10-22 ohm resistor in series with the diode and a small RC snubber (100 pF + 10 ohm) across it when operating at switching frequencies above 500 kHz. Do not parallel two 10MQ060NTRPBFs without 1-2 ohm balancing resistors - part-to-part Vf mismatch can concentrate current in one device.
Compliance-Informationen
RoHS compliant and lead-free matte-tin finish per Vishay datasheet. Halogen-free per IEC 61249-2-21. MSL 1 per J-STD-020. Not AEC-Q100 qualified; for automotive designs use AEC-Q101-qualified equivalents.
