A54SX32-2PQG208 - 48K Gate SX FPGA 208-PQFP | Microchip
Teilenummer: A54SX32-2PQG208 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $68.5 | $68,50 |
| 10 | $62.1 | $621,00 |
| 100 | $55.8 | $5.580,00 |
| 500 | $50.2 | $25.100,00 |
| 1.000 | $45.4 | $45.400,00 |
A54SX32-2PQG208 Übersicht
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and interconnects that the designer programs after manufacturing. The A54SX32 belongs to the one-time-programmable (OTP) antifuse class of FPGAs, positioned within the broader hierarchy: FPGA -> programmable logic device -> digital IC -> semiconductor. Unlike SRAM FPGAs, antifuse devices retain their configuration permanently, require no external configuration ROM, and start up instantly at power-on.
Key features include Microchip (formerly Actel/Microsemi) sea-of-modules architecture, which places dedicated R-cells (sequential) and C-cells (combinatorial) on a fine-grained grid for high logic utilization; 0.35 um CMOS process technology; dual-rail operation at 3.3V core with 5V-tolerant I/O; and predictable pin-to-pin delays that simplify timing closure. The 208-pin PQFP provides 174 user-programmable I/O for wide bus interfaces.
The antifuse interconnect architecture delivers inherent resistance to configuration bitstream theft and radiation-induced configuration upsets compared to SRAM-based fabrics, with typical internal routing delays enabling system clock rates up to the 320 MHz toggle specification. Programming is performed once at programming stations using the manufacturer-specified burn-in procedure.
Typical applications include industrial control systems, high-reliability embedded controllers, glueless bus bridging, state machines replacing multiple discrete logic devices, and aerospace/defense predecessor designs where deterministic instant-on behavior is required.
A key design consideration is that antifuse FPGAs are one-time programmable: functional changes require a new device, so thorough simulation and a rework strategy of socketed or dual-footprint prototyping is recommended before committing production boards.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in-Alternativen für A54SX32-2PQG208 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit A54SX32-2PQG208 (gleiche Bauform und Footprint) – abweichend in Package, Family, System Gates, Supply Voltage, Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
A54SX32-2PQG208I
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →A54SX32-P2PQG208
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
A54SX32A-2PQG208
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
A54SX16P-2PQG208I
✅ Drop-In✓ Auf Lager
$38.5 / Stück
Datenblatt ansehen →A54SX32-2PQG208 Grenzwerte & elektrische Eigenschaften
| Family | Actel SX (SX FPGA) |
| System Gates | 48000 gates |
| Equivalent Gates | 32000 gates |
| Logic Modules (Cells) | 1800 cells |
| Number of I/O | 174 |
| Maximum Toggle Frequency | 320 MHz |
| Process Technology | 0.35 um CMOS |
| Versorgungsspannung | 3.3 V (3 V to 3.6 V), 5 V (4.75 V to 5.25 V) |
| Programming Type | One-Time Programmable (antifuse) |
| Betriebstemperatur | 0C to +70C (TA) |
| Gehäuse | 208-BFQFP (PQFP-208) |
| Package Dimensions | 28 x 28 x 3.4 mm |
| Montageart | Surface Mount |
| Packaging | Tray |
| RoHS-Status | Compliant |
| Architecture | Sea-of-modules (C-cells and R-cells) |
A54SX32-2PQG208 28 x 28 x 3.4 mm Pinbelegungsleitfaden
Pinbelegung für A54SX32-2PQG208 (28 x 28 x 3.4 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für A54SX32-2PQG208.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
A54SX32-2PQG208 ist geeignet für 6 Anwendungs: Industrial Control and Automation, Legacy Defense and Avionics Heritage Systems, Bus Bridging and Interface Conversion, Instant-On Glue Logic Integration, Data Acquisition and Instrumentation Timing, Medical Device Control Electronics.
Industrial Control and Automation
The A54SX32-2PQG208 fits industrial controllers because its 3.3V/5V dual-supply I/O directly bridges modern 3.3V logic with legacy 5V TTL sensor and actuator buses without level shifters, and its 174 user I/O handle wide parallel fieldbus interfaces. In a PLC or motor-control backplane, the 320 MHz-class fabric absorbs state machines, interlocks, and PWM generation in one 208-PQFP device. Because the antifuse configuration is nonvolatile, the controller is functional within nanoseconds of power-on - no configuration boot delay that could leave outputs floating. Designers should budget the one-time-programmable constraint by freezing firmware logic before production release, as field updates require device replacement rather than reflashing.
Empfohlen
Legacy Defense and Avionics Heritage Systems
Defense and avionics sustainment programs widely deployed Actel SX FPGAs, and the A54SX32-2PQG208 serves as a sustainment/repair component for those boards. Its antifuse fabric is immune to configuration upset from radiation-induced bit flips in the way SRAM fabrics are not, and it presents no configuration readback path, aligning with anti-tamper practices. The deterministic pin-to-pin delays of the sea-of-modules architecture simplify re-verification of legacy timing budgets when replacing a failed device. Procurement should match the original temperature grade (commercial -2 vs industrial -I) and date-code policy of the platform's qualification basis. For new defense starts, Microchip's RTAX radiation-tolerant family is the modern successor path rather than the commercial SX.
Empfohlen
Bus Bridging and Interface Conversion
With 174 user I/O and 5V-tolerant input structures, the A54SX32-2PQG208 is well suited to bridging wide legacy parallel buses - such as VME, ISA-heritage, or backplane buses - to modern 3.3V logic. A single 208-PQFP device replaces dozens of 74-series TTL buffers, transceivers, and decoders, cutting board area, power, and assembly cost. The fine-grained C-cell/R-cell fabric maps byte-wide register files, address decoders, and handshaking logic with high utilization, while 320 MHz-class toggle performance far exceeds bus cycle rates. Because routing delays are predictable, worst-case bus timing can be signed off statically. Designers must verify per-pin drive current limits against bus loading when directly driving heavily loaded backplanes.
Empfohlen
Instant-On Glue Logic Integration
The A54SX32-2PQG208 consolidates random glue logic - address decoding, reset generation, chip-select maps, and bus multiplexing - into one nonvolatile device that is active the instant power is applied. Unlike SRAM FPGAs that spend milliseconds loading configuration from an external flash, the antifuse SX begins controlling reset and power-sequencing signals immediately, which matters for systems with strict reset timing requirements. The 48K-gate capacity comfortably absorbs thousands of gates of scattered SSI/MSI logic. In microprocessor systems pairing the FPGA with devices such as the MSP430FR5994, the SX can manage power-sequenced enables and watchdog logic from the first clock edge. The one-time-programmable nature rewards designs with frozen, stable logic definitions.
Empfohlen
Data Acquisition and Instrumentation Timing
Precision instruments need deterministic trigger, sample-clock distribution, and histogram logic; the A54SX32-2PQG208 provides 320 MHz-class toggle rates and fixed routing delays that keep sample strobes aligned across the 174 I/O. Pairing the SX32 with high-resolution converters such as the ADS1220 allows the FPGA to generate serialization, busy-handshake, and averaging counters with sub-nanosecond skew predictability across the parallel bus. The antifuse fabric also avoids the configuration-lockup risk of SRAM devices during brownout events, an advantage in bench and rack instruments that cycle power frequently. Because logic is burned once, instrument firmware logic should be finalized before programming, with spare gates reserved for ECOs via a documented rework path.
Empfohlen
Medical Device Control Electronics
Medical monitoring and diagnostic equipment benefits from the A54SX32-2PQG208's instant-on nonvolatile configuration, which guarantees that safety interlock and power-management logic is asserting correct levels from power application - a consideration for IEC 60601-class system risk analyses where uncontrolled I/O during boot is a hazard. The 5V-tolerant I/O eases integration with legacy patient-isolation and sensor front-end electronics, and the fixed timing simplifies verification artifacts required for regulatory documentation. Devices such as the TMP411 temperature sensors attach directly to FPGA-managed monitoring buses. As with all OTP FPGAs, design changes require new programmed devices, so design history files should retain the exact fuse database revision shipped with each production lot.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für A54SX32-2PQG208 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | A54SX32-2PQG208I | A54SX32-P2PQG208 | A54SX32A-2PQG208 | A54SX16P-2PQG208I |
|---|---|---|---|---|---|
| Package | 208-BFQFP (PQFP-208) | 208-BFQFP - same | 208-BFQFP - same | 208-BFQFP - same | 208-BFQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 48000 | 48000 | 48000 | 48000 | 16000 class (lower) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V |
| Family / Architecture | SX (antifuse, sea-of-modules) | SX - identical die | SX - identical die, faster grade | SX-A - enhanced successor, requires re-fit | SX16P - smaller class |
| Design Migration Effort | n/a (reference) | None - drop-in | None - drop-in (better timing margin) | Recompile + re-verify against SX-A timing | Re-fit design to smaller device |
Wichtigste Unterscheidungsmerkmale
- Identical-die industrial grade available (vs. A54SX32-2PQG208I)
- Free timing margin upgrade (vs. A54SX32-P2PQG208)
- Original SX vs SX-A successor (vs. A54SX32A-2PQG208)
Designhinweise
Decouple the 3.3V core rail and the I/O supply separately: place at least one 10uF bulk capacitor plus 0.1uF ceramics at each of the VCCA/VCCI pin groups of the 208-PQFP, as close to the supply pins as layout allows. Estimated: at 174 switching I/O driving moderate loads, transient currents on VCCI can reach the ampere class, so a solid ground return plane under the package is essential to keep ground bounce within noise margins.
The SX family is one-time programmable. Never release the board to programming without full gate-level simulation and a pin-report cross-check against the schematic netlist, because a fuse-level error cannot be corrected in the field. Keep the Designer software fuse database under version control and record the programming file checksum for each production lot. For prototypes, program spare devices alongside each design iteration.
The 208-PQFP has 0.5 mm pin pitch; use a solder-mask-defined land pattern per the Microchip 54SX datasheet package drawing and verify paste apertures to prevent bridging on this mature large-pitch QFP. Surround the package with a continuous ground plane and tie all GND pins to it with short vias. Unused I/O should be configured with the Designer software default weak pull-up or driven low to avoid floating inputs that increase noise susceptibility.
Estimated: the SX32 in PQFP-208 dissipates on the order of a few hundred milliwatts typical for moderate toggle rates, so forced airflow is generally unnecessary. However, worst-case power depends on toggle activity and I/O loading - run the Designer power calculator with your actual design before finalizing enclosure convection assumptions, and verify junction temperature stays within the 0C to +70C commercial envelope, or select the -I industrial grade if margins are tight.
Compliance-Informationen
Newark lists 'RoHS Compliant: Yes'; PCB Electronics describes the part as LEAD FREE. Not an automotive AEC-Q100 product line. REACH/halogen-free status not stated in provided data.