AD6402ARS - IF Transceiver Subsystem | Analog Devices
Teilenummer: AD6402ARS ✗ AbgekündigtAD6402ARS Übersicht
An IF Transceiver Subsystem is a mixed-signal integrated circuit that combines functions normally distributed across multiple discrete and monolithic blocks. Within the signal-chain hierarchy, it sits between the RF front end and the digital or demodulation circuitry. The AD6402 integrates tunable radio-frequency functions with clocking, modulation support, and regulated power delivery, allowing a compact receiver architecture for FM and FSK communication systems.
The AD6402's main differentiators are its integrated VCO and PLL, no-trim operation, and excellent sensitivity as identified in the manufacturer documentation. The internal low-dropout regulator supports the transceiver's analog circuitry, while the single-chip integration simplifies board layout in systems such as DECT, PWT, WLAN, and TDMA FM/FSK equipment. The approximately 1 MBPS operating target places the device in the class of intermediate-rate IF transceivers intended for compact digital radio links.
Technically, the AD6402 combines analog RF functions with digital timing functions in one package. The PLL provides frequency-related control for the integrated VCO and demodulator, while the FM/FSK-oriented receiver path supports recovery of information from IF signals. Because the device includes its own regulator and frequency-generation functions, system designers can shorten the RF signal path and reduce external discrete count. Exact gain, frequency range, supply limits, sensitivity figures, and pin-level functions should be confirmed against the Analog Devices AD6402 datasheet before final circuit design.
Typical applications include TDMA radio terminals, DECT and PWT handsets, WLAN equipment, and other FM/FSK communication links operating near 1 MBPS. The device is particularly relevant to compact radio systems where board area and integration matter more than the flexibility of discrete RF blocks. It can also serve as a reference design starting point for receiver development using FM or FSK modulation, provided the signal frequencies and interface requirements match the device's specified operating region.
The primary design consideration is the power architecture and RF layout. Place the regulator and PLL/VCO support network close to the device, route sensitive RF and IF traces away from switching nodes, and follow the manufacturer's recommended decoupling and grounding arrangement. Since the AD6402 is an obsolete product, new production designs should verify availability and use a current, fully documented replacement when functional equivalence and pin compatibility can be established rather than assuming that any similarly packaged transceiver is electrically interchangeable.
This product page consolidates the obsolete manufacturer information, package identification, application positioning, replacement considerations, and practical design guidance for engineers evaluating the AD6402ARS in legacy radio equipment.
Drop-in-Alternativen für AD6402ARS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
AD6402XRS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD6402ARS-REEL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD6402ARS Technische Daten
| Product Type | IF Transceiver Subsystem |
| Manufacturer | Analog Devices |
| Target Communication Rate | Approximately 1 MBPS |
| Modulation Support | FM or FSK |
| Operating System Category | TDMA systems |
| Gehäuse | 28-lead SSOP |
| Montageart | Surface Mount |
| Integrated VCO | Yes |
| Integrated PLL | Yes |
| Integrated Demodulator | Yes |
| Integrated Voltage Regulator | Yes, low-dropout |
| Trim Requirement | No trims |
| Sensitivity | Excellent, per manufacturer datasheet |
AD6402ARS 28-lead ssop Pinbelegungsleitfaden
Pinbelegung für AD6402ARS (28-lead ssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für AD6402ARS.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
AD6402ARS ist geeignet für 6 Anwendungs: TDMA Radio Systems, DECT Handsets, PWT Radio Equipment, WLAN IF Receivers, FM and FSK Data Links, Legacy Radio Equipment Repair.
TDMA Radio Systems
The AD6402ARS is designed for time-domain multiple-access radio links operating at approximately 1 MBPS with FM or FSK modulation. Its integrated VCO, PLL, demodulator, and low-dropout regulator reduce the number of separate RF and timing blocks needed in a compact receiver. This integration can shorten the IF signal path and simplify PCB planning where space is constrained. The device should be selected only when the carrier and IF frequencies, signal levels, and interface timing fall within the AD6402 operating specifications. Because the component is obsolete, legacy equipment repair is the most practical use case.
Empfohlen
DECT Handsets
The AD6402ARS suits compact DECT receiver implementations using FM or FSK links near its approximately 1 MBPS design point. Integrating the VCO, PLL, demodulator, and regulator supports a consolidated radio architecture in a 28-lead SSOP package. This can reduce board area compared with a discrete implementation and simplify manufacturing for legacy handset designs. Signal integrity remains the central concern: route IF traces away from noisy switching circuitry, follow the recommended grounding scheme, and confirm that the required channel spacing and receiver sensitivity match the manufacturer specifications before redesigning the RF section.
Empfohlen
PWT Radio Equipment
AD6402ARS-based PWT equipment can use the integrated IF transceiver subsystem for FM or FSK reception at approximately 1 MBPS. The on-chip PLL and VCO reduce external frequency-generation circuitry, while the demodulator and low-dropout regulator consolidate additional functions into one package. This integration is valuable in compact PWT terminals where component count and board area affect cost and assembly. Designers should reproduce the manufacturer's reference decoupling and layout as closely as possible, preserve controlled return paths beneath the SSOP, and verify that the input signal level does not exceed the device's documented range.
Empfohlen
WLAN IF Receivers
The AD6402ARS can serve legacy WLAN receiver blocks that use compatible FM or FSK signaling at approximately 1 MBPS. Its integrated VCO, PLL, demodulator, and regulator provide a compact subsystem for intermediate-frequency conversion and signal recovery. The 28-lead SSOP format can simplify retrofit work into existing WLAN boards because it avoids a large mixed-signal package. The critical performance checks are carrier and IF alignment, receiver sensitivity, allowable signal amplitude, and supply sequencing. Use the manufacturer's recommended test points and layout geometry during repair or board conversion, and request a quote for legacy availability through this page.
Empfohlen
FM and FSK Data Links
The AD6402ARS is appropriate for compact FM or FSK data receivers operating near its approximately 1 MBPS target rate. Combining a PLL, VCO, demodulator, and regulated supply in one IC reduces the number of discrete functional blocks and can make signal-chain troubleshooting more systematic. Use it when the modulation format and IF bandwidth match the device design point rather than assuming compatibility with arbitrary FM or FSK waveforms. Board implementation should emphasize a quiet regulator section, short RF and IF routes, and a controlled ground reference. Legacy radio-link upgrades must also account for the device's obsolete lifecycle status.
Empfohlen
Legacy Radio Equipment Repair
AD6402ARS is most directly relevant to repairing legacy radio equipment that already contains the 28-lead SSOP device and its original interface arrangement. The integrated VCO, PLL, demodulator, and low-dropout regulator mean the original board likely depends on the device for several receiver functions, making exact pin and electrical equivalence essential. Before installing AD6402XRS or AD6402ARS-REEL, compare the complete manufacturer datasheet pin descriptions, supply limits, frequency ranges, and control timing. Do not substitute based only on package outline. For obsolete-part procurement, use the Request a Quote form and specify whether factory-sealed, programmed, or tested legacy stock is required.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für AD6402ARS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | AD6402XRS | AD6402ARS-REEL |
|---|---|---|---|
| Package | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | IF Transceiver Subsystem | IF Transceiver Subsystem | IF Transceiver Subsystem |
| Target Communication Rate | Approximately 1 MBPS | Approximately 1 MBPS | Approximately 1 MBPS |
| Modulation Support | FM or FSK | FM or FSK | FM or FSK |
| Integrated VCO | Yes | Yes | Yes |
| Integrated PLL | Yes | Yes | Yes |
| Integrated Demodulator | Yes | Yes | Yes |
| Integrated Regulator | Yes, low-dropout | Yes, low-dropout | Yes, low-dropout |
| Lifecycle Status | Obsolete | Obsolete family | Obsolete family |
Wichtigste Unterscheidungsmerkmale
- Single-package radio subsystem integration (vs. AD6402XRS)
- Optimized intermediate-rate FM and FSK operation (vs. AD6402ARS-REEL)
- No-trim integrated VCO architecture (vs. AD6402XRS)
Designhinweise
Follow the Analog Devices AD6402 reference layout and pin-description table when placing the 28-lead SSOP. Keep the regulator input, output, and ground connections short, place required decoupling capacitors at their associated pins, and provide a low-impedance ground reference. Because the device combines RF, PLL, demodulator, and regulator functions in one package, poor grounding or long supply loops can degrade performance in more than one subsystem.
Separate the IF and RF signal path from digital, switching, and power-conversion wiring. Use short, controlled-impedance routes where appropriate, preserve the manufacturer's recommended component orientation, and avoid routing high-current traces beneath the SSOP. The internal VCO and PLL can couple noise into receiver functions, so conservative partitioning is preferable to a layout optimized only for component density.
Do not treat any 28-lead SSOP IF transceiver as a direct substitute. Confirm AD6402XRS pin functions, suffix-specific ratings, and electrical limits against the manufacturer datasheet before using it in AD6402ARS equipment. AD6402ARS-REEL is the same device offered with reel packing, while AD6402XRS is a family ordering variant whose exact compatibility must be established from the full datasheet.
Use the manufacturer's specified supply and bypass arrangement to keep the integrated regulator within its intended operating region. Verify startup behavior, load current, and voltage tolerance across temperature before applying power to legacy hardware. The available product summary does not provide the complete numerical supply limits, so those values must be taken directly from the AD6402 manufacturer datasheet.
Compliance-Informationen
The Analog Devices product page identifies the AD6402 documentation as obsolete but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the device is not identified as an automotive-qualified product.