AD7714YRU-REEL7 - 24-bit Sigma-Delta ADC, 5-Ch, 24-TSSOP | ADI
Teilenummer: AD7714YRU-REEL7 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.2 | $132,00 |
| 100 | $11.85 | $1.185,00 |
| 500 | $10.55 | $5.275,00 |
| 1.000 | $9.4 | $9.400,00 |
AD7714YRU-REEL7 Übersicht
An ADC (Analog-to-Digital Converter) is a semiconductor device that converts continuous analog signals into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Sigma-delta ADCs use oversampling and noise-shaping to achieve very high resolution (16-24 bits) at low sample rates, making them ideal for precision DC and low-frequency measurement applications such as weigh scales, industrial process control, and sensor signal conditioning. Within the IC hierarchy, the AD7714 belongs to the data-converter category, then ADC, then precision sigma-delta ADC, then integrated signal-conditioning ADC.
Key features include 24-bit no-missing-code performance, +/-0.0015% nonlinearity, 140 nV rms noise, gains programmable from 1 to 128, and three fully differential or five pseudo-differential input channels. A three-wire serial interface (SPI/QSPI/MICROWIRE-compatible) reduces isolation overhead, and on-chip self-calibration eliminates zero-scale and full-scale errors plus temperature drift. The Y-grade also includes a low-side power switch for bridge-sensor applications.
Typical applications include weigh scales, strain-gauge transducers, RTD/thermocouple temperature measurement, industrial process control loops, and portable battery-powered instrumentation. The wide gain range lets a single part digitize both low-level thermocouple signals (tens of microvolts) and 0-10 V industrial signals without external amplifiers.
Designers should pay attention to the input common-mode range and avalanche protection; the reference input must remain within the specified common-mode window for the chosen gain. PCB layout should isolate analog and digital grounds with a single-point connection near the ADC.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not directly aggregated on the manufacturer datasheet.
Drop-in-Alternativen für AD7714YRU-REEL7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
AD7714YRU-REEL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD7714YRUZ-REEL7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD7714YRZ-REEL7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD7714YRUZ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD7714YRU-REEL7 Grenzwerte & elektrische Eigenschaften
| Auflösung | 24 bits |
| Number of Input Channels | 3 differential / 5 pseudo-differential |
| ADC Architecture | Sigma-Delta (charge-balancing) |
| Output Data Rate | 1 kSPS max |
| Eingangsspannungsbereich | -1.25 V to +1.25 V (at gain = 1) |
| Programmable Gain | 1, 2, 4, 8, 16, 32, 64, 128 |
| Nonlinearity | 0.0015% (Y grade) |
| RMS Noise | 140 nV |
| No Missing Codes | 24 bits guaranteed |
| Versorgungsspannung | 3 V or 5 V nominal |
| Versorgungsstrom | 500 uA typical |
| Betriebstemperaturbereich | -40C to +105C (Y grade) |
| Schnittstelle | 3-wire serial (SPI/QSPI/MICROWIRE-compatible) |
| Gehäuse | 24-TSSOP (RU) |
| Montageart | Surface Mount |
| Calibration | On-chip self-calibration (zero + full-scale) |
| Schmitt Trigger Inputs | Yes on SCLK and DIN (Y grade) |
| RoHS-Status | Compliant |
AD7714YRU-REEL7 Pin-Konfiguration
| Pin 1 | SCLK — Serial clock input (Schmitt-triggered, Y grade) |
| Pin 2 | DIN — Serial data input (Schmitt-triggered, Y grade) |
| Pin 3 | DOUT — Serial data output |
| Pin 4 | DRDY — Data ready output (active low) |
| Pin 5 | MODE — Operating mode control input |
| Pin 6 | SYNC — Synchronization input |
| Pin 7 | RESET — Reset input (active low) |
| Pin 8 | REF IN+ — Positive reference input |
| Pin 9 | REF IN- — Negative reference input |
| Pin 10 | AIN1 — Analog input channel 1 |
| Pin 11 | AIN2 — Analog input channel 2 |
| Pin 12 | AIN3 — Analog input channel 3 |
| Pin 13 | AIN4 — Analog input channel 4 |
| Pin 14 | AIN5 — Analog input channel 5 / pseudo-differential mode |
| Pin 15 | STANDBY — Standby control |
| Pin 16 | IOUT — Internal current source (for bridge excitation) |
| Pin 17 | AGND — Analog ground |
| Pin 18 | AVDD — Analog supply (3 V or 5 V) |
| Pin 19 | AVDD — Analog supply (tie to AVDD) |
| Pin 20 | DGND — Digital ground |
| Pin 21 | DVDD — Digital supply (3 V or 5 V) |
| Pin 22 | NC — Not connected (per datasheet) |
| Pin 23 | NC — Not connected (per datasheet) |
| Pin 24 | NC — Not connected (per datasheet) |
Typische Anwendungen
AD7714YRU-REEL7 ist geeignet für 7 Anwendungs: Industrial Weigh Scales, Strain-Gauge and Bridge Sensors, RTD and Thermocouple Temperature Measurement, Portable Battery-Powered Instrumentation, Industrial Process Control Loops, Medical Patient Monitoring, Smart Sensor / IoT Edge Nodes.
Industrial Weigh Scales
The AD7714YRU-REEL7 is a primary choice for industrial weigh scales because its 24-bit no-missing-codes resolution and 0.0015% nonlinearity directly determine load-cell measurement accuracy. The on-chip programmable gain of 1-128 lets a single ADC digitize the full-bridge strain-gauge output (typically 1-3 mV/V) without an external instrumentation amplifier, reducing BOM cost. The Y-grade -40C to +105C range and Schmitt-trigger inputs on SCLK and DIN ensure robust operation in factory-floor EMI environments.
Empfohlen
Strain-Gauge and Bridge Sensors
For strain-gauge and Wheatstone-bridge transducers the AD7714YRU-REEL7 integrates low-side power switches that drive the bridge directly, eliminating a discrete MOSFET and simplifying PCB layout. The 140 nV rms noise at low output data rates enables microstrain resolution. Programmable gains up to 128 condition bridges producing only a few millivolts full-scale, while the on-chip self-calibration removes zero-scale and full-scale drift across the operating temperature range.
Empfohlen
RTD and Thermocouple Temperature Measurement
The AD7714YRU-REEL7 digitizes RTD and thermocouple signals directly thanks to its programmable gain up to 128 and true bipolar inputs. A type-K thermocouple at 200C produces only ~8 mV; the AD7714 amplifies this with gain 128 and resolves to better than 0.1C using its on-chip digital filtering. The Y-grade -40C to +105C range and 500 uA supply suit remote, battery-powered temperature transmitters in industrial process loops.
Empfohlen
Portable Battery-Powered Instrumentation
With only 500 uA typical supply current, the AD7714YRU-REEL7 is well-suited for portable, battery-powered data-acquisition modules such as handheld multimeters and field calibrators. The 3 V supply compatibility lets it run directly from two AA cells. Power-down mode via the MODE pin drops current further to <10 uA, enabling multi-year battery life in periodic-sampling applications. The TSSOP-24 package supports compact handheld enclosures.
Empfohlen
Industrial Process Control Loops
The AD7714YRU-REEL7 is widely deployed in 4-20 mA loop-powered transmitters and PLC analog input modules because of its high noise rejection (programmable digital filter) and wide common-mode input range. The Schmitt-triggered SCLK/DIN tolerate the long cables and ground-potential differences typical of process plants. Three fully differential inputs accommodate multi-channel pressure, flow, and level transmitters on a single ADC.
Empfohlen
Medical Patient Monitoring
The AD7714YRU-REEL7's 24-bit resolution and 140 nV noise enable precision measurement of biopotential signals in medical patient monitors, including ECG, respiration impedance, and temperature channels. Its 500 uA current consumption allows integration into compact bedside or wearable monitors. The on-chip calibration removes drift over the device lifetime, supporting long calibration intervals mandated by medical device standards.
Empfohlen
Smart Sensor / IoT Edge Nodes
The AD7714YRU-REEL7 fits smart-sensor and IoT edge-node designs that digitize multiple analog sensors (temperature, pressure, flow) directly into a low-cost MCU. The SPI-compatible serial interface reduces pin count, allowing use with 8-bit MCUs in space-constrained nodes. Combined with an external MCU's wireless transceiver, the AD7714YRU-REEL7 enables battery-powered wireless sensor networks for industrial IoT and smart-building applications.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für AD7714YRU-REEL7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | AD7714YRU-REEL | AD7714YRUZ-REEL7 | AD7714YRZ-REEL7 | AD7714YRUZ |
|---|---|---|---|---|---|
| Package | 24-TSSOP (RU) | 24-TSSOP (RU) - same | 24-TSSOP (RU) - same | 24-TSSOP (RU) - same | 24-TSSOP (RU) - same |
| Brand | Analog Devices | Analog Devices - same | Analog Devices - same | Analog Devices - same | Analog Devices - same |
| Resolution | 24 bits | 24 bits | 24 bits | 24 bits | 24 bits |
| Reference Type | External | External | Internal | Internal | Internal |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Channels (Diff/Pseudo) | 3 / 5 | 3 / 5 | 3 / 5 | 3 / 5 | 3 / 5 |
| RoHS Compliance | Yes (REEL7 = lead-free reel) | Varies (REEL, leaded option) | Yes | Yes (R suffix) | Yes |
Wichtigste Unterscheidungsmerkmale
- Industrial Y-grade temperature range with Schmitt-triggered serial inputs (vs. AD7714AN (A-grade predecessor))
- Integrated bridge-excitation current source (vs. Discrete load-cell ADC chains)
- True bipolar +/-1.25 V inputs at gain = 1 (vs. Unipolar-input ADCs (e.g. AD7799))
Designhinweise
Estimated: the AD7714YRU-REEL7 TSSOP-24 land pattern requires ~6.4 mm x 5.0 mm board area. Route analog and digital grounds as separate islands that join at a single point beneath the AGND pin. Place the 0.1 uF AVDD/DVDD decoupling capacitors within 3 mm of their respective supply pins, and add a 10 uF bulk tantalum close to the package. Use a guarded analog ground plane under the input traces to minimize leakage for high-gain (>=64) configurations.
Estimated: the AD7714YRU-REEL7 consumes 500 uA typical at 5 V, which is ~2.5 mW; at 3 V it is ~1.5 mW. Ensure the AVDD rail has less than 50 uV rms ripple to avoid degrading the ADC's 140 nV noise floor - a low-noise LDO such as ADP3338 is recommended. The DRDY pin transitions every output-data-rate interval; route it away from SCLK to avoid coupling.
When using gains of 32 or higher, the input signal amplitude can be below 40 mV full-scale. Use guarded input traces, low-thermal-EMF connectors (avoid Kovar pins), and a low-bias-current front-end op-amp such as the AD8628 (5 pA bias). For thermocouple inputs, add a common-mode RC filter (1 kohm + 10 nF) at each AIN pin to suppress RF interference that would otherwise rectify inside the ESD diodes.
Do not apply signals to AIN1-AIN5 before powering up AVDD - the absolute maximum rating on the analog inputs is AVDD+0.3 V. Always run the on-chip self-calibration sequence after power-up and after any gain change, otherwise offset and gain errors will exceed datasheet limits. The MODE pin must not be left floating; tie it high or low per the desired operating mode.
Compliance-Informationen
RoHS and lead-free status per the AD7714 datasheet and Digi-Key product page (P/N 619534). REACH compliance inferred from Analog Devices corporate policy; not explicitly stated on the product page. The -REEL7 suffix confirms lead-free reel packaging. AEC-Q100 is not applicable - this is a precision analog component, not an automotive-qualified device; industrial temperature range provided.
