Analog Devices

AD9954YSV - 400 MSPS 14-Bit DDS IC | Analog Devices

Teilenummer: AD9954YSV ✓ Aktiv
1.8 V Vdss 48-lead TQFP with exposed pad, 7 x 7 mm Package Multiple modes including user-defined linear sweep Speed Static RAM Memory
MOQ: 1 |

AD9954YSV Übersicht

Analog Devices AD9954YSV is a 400 MSPS, 14-bit, 1.8 V CMOS direct digital synthesizer in a 48-lead TQFP with exposed pad. It combines a high-speed internal DAC, phase-to-frequency conversion logic, static RAM, and a high-speed serial programming interface to generate digitally programmable, frequency-agile output signals.

A direct digital synthesizer, or DDS, is a programmable waveform-generation architecture that converts a phase word into a frequency-accurate output. A DDS belongs to the clock-and-timing IC hierarchy alongside frequency synthesizers, waveform generators, and clock-generation devices. Its digital tuning architecture enables frequency, phase, and sweep control through a serial bus while retaining direct digital programming.

The AD9954 supports 400 MSPS operation, a 14-bit DAC, and 32-bit tuning. Static RAM enables several frequency-sweep modes, including a user-defined linear sweep. An on-chip high-speed comparator supports square-wave output requirements, while the integrated oscillator and phase-locked-loop circuitry provide additional clock-generation approaches for system architectures that need a local reference or multiplied source.

The device is programmed through a high-speed serial I/O port, allowing a host controller to load tuning words and configuration commands while the synthesizer remains under firmware control. This architecture is useful when the output frequency must change rapidly or follow a digitally calculated sequence. The exposed thermal pad supports heat transfer from the high-performance device to the PCB copper area, although thermal performance still depends on layout, ambient temperature, and dissipation.

Typical uses include tunable signal sources, frequency-agile test equipment, communications waveform generation, local oscillator generation, and instrumentation requiring precise digital frequency control. The DDS architecture is especially useful when multiple operating modes or stored sweep profiles are needed without relying on a separate waveform-memory device.

A critical design consideration is to use the pin description, power-supply requirements, and recommended decoupling directly from the Analog Devices data sheet when assigning a PCB footprint. The exposed pad must be connected according to the device recommendations, and high-speed serial routing should be kept short with a controlled return path.

This page combines the AD9954YSV device characteristics, sourcing information, replacement guidance, comparison parameters, and practical design notes in one engineering-focused reference. It also identifies where a true pin-compatible substitution must be checked against the complete data sheet before production use.

Drop-in-Alternativen für AD9954YSV – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

AD9954YSVZ

✅ Drop-In
📦 48-TQFP-EP (7 x 7 mm)
Same 400 MSPS, 14-bit DDS function and 48-TQFP-EP package; order-code distinction requires confirmation against the current manufacturer ordering table.

📋 Referenzalternative (nicht im Katalog)

AD9954YSV Technische Daten

Device Type Direct Digital Synthesizer (DDS)
Maximum Update Rate 400 MSPS
DAC Resolution 14 bit
Tuning Word Resolution 32 bit
Versorgungsspannung 1.8 V
Schnittstellentyp High-speed serial I/O
On-Chip Memory Static RAM
Frequency Sweep Support Multiple modes including user-defined linear sweep
Square-Wave Output Support On-chip high-speed comparator
Clocking Support On-chip oscillator and PLL circuitry
Gehäuse 48-lead TQFP with exposed pad, 7 x 7 mm
Montageart Surface mount

AD9954YSV 48-lead tqfp with exposed pad, 7 x 7 mm Pinbelegungsleitfaden

Pinbelegung für AD9954YSV (48-lead tqfp with exposed pad, 7 x 7 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für AD9954YSV im 48-lead tqfp with exposed pad, 7 x 7 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD9954YSV.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD9954YSV ist geeignet für 6 Anwendungs: Frequency-Agile Signal Sources, Communications Waveform Generation, Precision Test and Measurement, Linear Frequency-Sweep Systems, Local Oscillator Generation, Digital Control and Trigger Sources.

📡

Frequency-Agile Signal Sources

The AD9954YSV fits frequency-agile test and signal-generation systems because its 400 MSPS update rate and 32-bit tuning architecture allow output frequency to be changed digitally through the serial interface. Static RAM provides the basis for stored sweep behavior, while the 14-bit internal DAC establishes the analog output resolution. The design can therefore combine a fixed carrier with programmed frequency steps without relying on an external sweep controller. The principal trade-off is that the serial programming path and exposed-pad layout require careful PCB implementation.

🌐

Communications Waveform Generation

The AD9954YSV can serve as a programmable local waveform source in communications equipment where the operating frequency must be adjusted by firmware. Its 400 MSPS update rate supports rapid tuning, and the 32-bit tuning word provides detailed frequency-control resolution. The integrated high-speed comparator also permits a digital square-wave output where a communications clock or trigger function is required. Designers should account for the 1.8 V supply, external reference requirements, serial-interface timing, and thermal management around the exposed pad.

🔧

Precision Test and Measurement

In automated test and measurement systems, the AD9954YSV provides a digitally controlled source that can be reconfigured by the host controller through its high-speed serial port. The 14-bit DAC and 400 MSPS operation support detailed waveform synthesis, while static RAM enables stored sweep profiles for repetitive measurements. The same device can produce an analog output and use its high-speed comparator for a square-wave signal. Calibration, output filtering, reference-clock quality, and amplitude control remain important system-level considerations.

📈

Linear Frequency-Sweep Systems

The AD9954YSV is suited to linear sweep systems because its on-chip static RAM supports multiple sweep modes, including a user-defined linear sweep. Instead of requiring an external sweep RAM, the synthesizer can operate from stored or host-programmed frequency states while the 400 MSPS architecture controls output updates. This can simplify firmware organization for repetitive scan routines. Engineers should verify sweep mode definitions, state-transition timing, and output settling behavior using the Analog Devices AD9954 data sheet before defining a complete measurement profile.

📡

Local Oscillator Generation

The AD9954YSV can generate a digitally tuned local oscillator for RF and microwave subsystems that require programmable output frequency. Its on-chip oscillator and PLL circuitry provide multiple approaches for establishing the synthesizer’s operating clock, while the DDS architecture supports fine frequency control through the 32-bit tuning word. The 14-bit DAC determines the available analog output resolution, and the high-speed comparator can support clock-like square-wave outputs. Reference selection, loop configuration, filtering, and board-level isolation remain critical to final signal quality.

⏱️

Digital Control and Trigger Sources

The AD9954YSV supports systems that need both a programmable analog source and a digital output by combining its internal DAC with the on-chip high-speed comparator. The comparator output provides a square-wave signal that can be used for trigger, clock, or timing functions, while the DDS path supplies a frequency-controlled analog output. The 400 MSPS update rate and high-speed serial interface allow coordinated updates from a controller. Output timing, comparator configuration, board routing, and exposed-pad thermal design should be validated during implementation.

Zusammenfassung der empfohlenen Produkte

AD9954 Base family designation for the same 400 MSPS DDS device Verwendet in: Frequency-Agile Signal Sources, Communications Waveform Generation, Precision Test and Measurement, Linear Frequency-Sweep Systems, Local Oscillator Generation, Digital Control and Trigger Sources AD9954YSVZ Related orderable variant in the 48-lead TQFP-EP package Verwendet in: Frequency-Agile Signal Sources, Communications Waveform Generation, Precision Test and Measurement, Linear Frequency-Sweep Systems, Local Oscillator Generation, Digital Control and Trigger Sources
What is the AD9954YSV?
The AD9954YSV is a 400 MSPS, 14-bit, 1.8 V CMOS direct digital synthesizer manufactured by Analog Devices. According to the Analog Devices AD9954 data sheet, it combines a high-speed internal DAC with a programmable DDS architecture, static RAM, a high-speed serial interface, and a 48-lead TQFP package with an exposed pad.
What are the key specifications of AD9954YSV that engineers should know?
The AD9954YSV combines a 400 MSPS maximum update rate, a 14-bit DAC, and 32-bit tuning-word resolution. The Analog Devices AD9954 data sheet also identifies static RAM for flexible sweeps, an on-chip comparator for square-wave output, and integrated oscillator and PLL circuitry. It is packaged in a 48-lead, 7 x 7 mm TQFP with an exposed pad.
What is the operating voltage of AD9954YSV?
The AD9954YSV operates from a 1.8 V supply. The Analog Devices AD9954 product page and data sheet identify the device as a 1.8 V CMOS direct digital synthesizer. The exposed-pad connection and supply-decoupling requirements should be implemented exactly as described in the manufacturer data sheet.
Where can I download the AD9954YSV datasheet PDF?
The official AD9954YSV data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9954.pdf. It is the preferred document for the complete pin description, electrical characteristics, serial-interface timing, phase-locked-loop behavior, and recommended application circuit. The manufacturer product page also links to supporting documentation and tools.
Where can I find the AD9954YSV pinout?
The AD9954YSV pinout is shown in the pin-description section of the official Analog Devices AD9954 data sheet. The device uses a 48-lead TQFP package with an exposed pad, and the exposed-pad connection requirements must be followed during PCB layout. Use the package drawing and pin-description table together when assigning signal and power connections.
How is the AD9954YSV programmed?
The AD9954YSV is programmed through its high-speed serial I/O port. According to the Analog Devices AD9954 data sheet, the interface supports digital programming of the synthesizer and includes static RAM for flexible frequency-sweep operation. Firmware should follow the documented serial timing, address, and data conventions to avoid invalid tuning-word writes.
What frequency-sweep functions does AD9954YSV support?
The AD9954YSV supports multiple frequency-sweep modes and a user-defined linear sweep using its on-chip static RAM. This allows stored or digitally programmed frequency trajectories without requiring an external waveform-memory device. The exact sweep-state sequencing and available operating modes should be implemented according to the manufacturer data sheet.
Can AD9954YSV generate a square-wave output?
Yes. The AD9954YSV includes an on-chip high-speed comparator for applications requiring a square-wave output, according to the Analog Devices AD9954 data sheet. This provides a digital thresholding function in addition to the synthesizer’s analog output path. Comparator configuration, output polarity, and timing must follow the documented register settings.
AD9954YSV vs AD9954YSVZ — which package option should I choose?
AD9954YSVZ is the orderable variant associated with a 48-lead TQFP-EP, 7 x 7 mm package and appears on manufacturer and distributor listings. AD9954YSV is the target orderable designation, while its exact order code should be checked against the current Analog Devices product-selection table. Confirm package dimensions, exposed-pad layout, and temperature marking before substitution.
When should I choose AD9954YSV over another DDS?
Choose the AD9954YSV when the design requires a 400 MSPS update rate, 14-bit DAC resolution, 32-bit tuning, serial programmability, and integrated sweep memory in a 48-lead TQFP with exposed pad. These features make it appropriate for frequency-agile signal generation and stored sweep operation. A different DDS should be selected when its update rate, DAC resolution, interface, or package better matches the system.
What is the best drop-in replacement for AD9954YSV?
No independently verified, distinct drop-in replacement is established for the AD9954YSV. AD9954YSVZ is the closest identified ordering variant with the same 48-lead TQFP-EP, 7 x 7 mm package, but it should not be treated as interchangeable without confirming the current manufacturer ordering table, electrical ratings, pinout, and exposed-pad requirements.
Can AD9954YSVZ replace AD9954YSV?
AD9954YSVZ may share the AD9954 silicon and the 48-lead TQFP-EP, 7 x 7 mm package with AD9954YSV, but a valid replacement still requires confirmation of pinout, electrical limits, temperature grade, and order-code details. Compare those items against the current Analog Devices AD9954 data sheet and product-selection table before changing a production BOM.
What can replace AD9954YSV?
A valid replacement for AD9954YSV must match the 48-lead TQFP footprint, exposed-pad connection, power requirements, serial interface, DDS tuning behavior, and relevant electrical limits. AD9954YSVZ is the closest identified ordering variant, while other DDS families may require different pinouts, interfaces, or packages. Verify every replacement against the manufacturer documentation rather than relying only on a frequency or sample-rate match.
What is the best Analog Devices equivalent for AD9954YSV?
AD9954YSVZ is the closest identified Analog Devices ordering variant because it is listed with the same AD9954 400 MSPS, 14-bit DDS function in a 48-lead TQFP-EP, 7 x 7 mm package. It should receive a 100% parameter-proximity assessment only after the current ordering and pinout tables confirm that the distinction is limited to packaging or order-code handling.
Where to buy AD9954YSV online?
Use the Request a Quote form on this XAIPART page to request AD9954YSV availability, lead time, and a quotation. The form allows the exact MPN, package, and intended quantity to be reviewed before an order is placed, which helps avoid confusion with the closely related AD9954YSVZ ordering variant.
What is the price and lead time of AD9954YSV?
Use the Request a Quote form on this XAIPART page for current AD9954YSV pricing, stock status, minimum order quantity, and lead time. The request should state the exact AD9954YSV MPN and required quantity. Package form, quantity, and current component availability can affect the quotation and delivery schedule.
Is AD9954YSV in stock?
Current AD9954YSV stock should be confirmed through the Request a Quote form on this XAIPART page. Submit the exact MPN, quantity, and delivery location so the order can be matched against available inventory and the current supply schedule. Do not infer stock status from a related AD9954YSVZ listing.

Technische Referenzdaten für AD9954YSV – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose AD9954YSV when a design needs a 400 MSPS, 14-bit DDS with 32-bit tuning, static-RAM sweep modes, high-speed serial programming, and an integrated square-wave comparator in a 48-lead TQFP with an exposed pad. It is particularly suitable for frequency-agile signal sources, communications waveform generation, automated test equipment, and programmable local oscillators. AD9954YSVZ is the closest identified ordering variant in the same package, but the exact order-code differences must be checked in the current Analog Devices selection table before substitution. Other DDS families should be considered when their sample rate, DAC resolution, serial interface, clock architecture, or package provides a better match. Avoid choosing a device only by update rate; reference-clock support, sweep behavior, serial protocol, exposed-pad requirements, and thermal performance must also fit the target PCB.

Vergleich mit Alternativen

Parameter Dieses Produkt AD9954YSVZ
Brand Analog Devices Analog Devices
Package 48-TQFP-EP (7 x 7 mm) 48-TQFP-EP (7 x 7 mm)
Device Type Direct Digital Synthesizer (DDS) Direct Digital Synthesis (DDS)
Maximum Update Rate 400 MSPS 400 MHz
DAC Resolution 14 bit 14 bit
Tuning Word Resolution 32 bit 32 bit
Supply Voltage 1.8 V 1.8 V CMOS
Programming Interface High-speed serial I/O High-speed serial I/O
Frequency Sweep Modes Multiple modes including user-defined linear sweep Multiple modes including user-defined linear sweep
Square-Wave Output On-chip high-speed comparator On-chip high-speed comparator

Wichtigste Unterscheidungsmerkmale

  • High-speed integrated DDS architecture (vs. AD9954YSVZ)
  • Integrated sweep and control resources (vs. AD9954YSVZ)
  • Dual analog and square-wave output capability (vs. AD9954YSVZ)

Designhinweise

Assign the PCB footprint directly from the Analog Devices AD9954 package drawing rather than relying only on a generic 48-lead TQFP outline. Confirm the exposed-pad dimensions, pin-1 orientation, and pad numbering. Route the serial interface away from sensitive analog output paths, use a continuous ground reference where practical, and place the required decoupling capacitors close to their associated supply pins according to the manufacturer layout guidance.

The exposed pad is a thermal and electrical feature that must be connected as directed by the manufacturer. Provide copper area beneath the device, thermal vias where recommended, and a layout that avoids creating an isolated thermal island. Validate worst-case junction temperature using the actual ambient conditions and the device dissipation in the intended operating mode; a 7 x 7 mm package alone does not determine operating temperature.

Keep the high-speed serial clock and data traces short, use a continuous return path, and avoid splitting the ground plane beneath the digital interface. The 400 MSPS DAC update rate can create energy at higher harmonics, so output filtering and return-path design may influence spectral purity. Establish filter values from the required frequency band and measured unwanted-spectral components rather than selecting them from the update rate alone.

Do not select a replacement using sample rate alone. A valid drop-in part must also match the 48-lead TQFP footprint, exposed pad, 1.8 V supply, 14-bit DAC architecture, 32-bit tuning, serial protocol, clocking options, comparator behavior, and electrical limits. In particular, distinguish the AD9954YSV and AD9954YSVZ order codes using the current Analog Devices product-selection table before committing a replacement to production.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific compliance declaration for AD9954YSV was identified in the available manufacturer and distributor material. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current Analog Devices product page or declaration documentation.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD9954YSV datasheet AD9954YSV datasheet pdf AD9954YSV pinout AD9954YSV 400 MSPS AD9954YSV 14 bit DDS AD9954YSV 48 TQFP AD9954YSV equivalent AD9954YSV replacement AD9954YSV cross reference AD9954YSV vs AD9954YSVZ AD9954YSV application circuit Analog Devices AD9954YSV AD9954YSV price AD9954YSV stock AD9954YSV programming

Verwandte Bauteile & Begriffe

Analog Devices AD9954 AD9954YSV AD9954YSVZ Direct Digital Synthesizer DDS frequency synthesizer clock and timing IC semiconductor Digital-to-analog converter DAC 14-bit DAC 400 MSPS 32-bit tuning word static RAM user-defined linear sweep high-speed serial I/O phase-locked loop PLL on-chip oscillator high-speed comparator square-wave output 48-lead TQFP TQFP-EP surface-mount package exposed pad frequency-agile signal generation communications waveform generation 1.8 V CMOS
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen