ADF4218LBRU - Dual Integer-N RF/IF PLL | Analog Devices
Teilenummer: ADF4218LBRU ✓ AktivADF4218LBRU Übersicht
An integer-N PLL is a frequency-synthesis building block that locks the phase and frequency of an output to a reference signal. In the broader device hierarchy, a PLL is a clock-and-timing integrated circuit, a frequency synthesizer, and ultimately a phase-locking signal-processing component. The ADF4218L integrates two synthesis channels so a transceiver can use coordinated RF and IF local-oscillator signals while sharing a reference and digital control interface.
The ADF4218L operates from a 2.6 V to 3.3 V supply and is compatible with 1.8 V logic. Its 7.0 mA total supply current suits low-power RF and IF signal chains where both channel count and supply efficiency are important. Selectable dual-modulus prescaler values and programmable charge-pump currents provide flexibility when balancing fractional spur performance, phase noise, lock time, and tuning range. The separate VP connection extends the available tuning range.
Internally, the device combines a low-noise digital phase-frequency detector, a precision charge pump, programmable reference division, programmable feedback division, dual-modulus prescalers, and a complete dual integer-N PLL architecture. The digital phase-frequency detector compares the divided feedback signal with the divided reference. The charge pump then drives the voltage-controlled oscillator until the phase and frequency error is corrected.
Typical uses include wireless receiver and transmitter local oscillators, dual-band RF conversion systems, IF signal generation, frequency-hopping equipment, and instrumentation requiring precise phase locking. Because the ADF4218L provides both RF and IF synthesis functions, it can reduce the number of separate synthesizer devices in architectures where coordinated reference-derived frequencies are required.
Designers should review the pin description and reference circuitry in the Analog Devices data sheet before assigning tracks. Pay particular attention to loop-filter components, charge-pump settings, VCO interface components, reference routing, and decoupling. A practical 20-pin TSSOP layout should minimize high-current return paths and keep the reference and feedback connections away from noisy switching nodes.
This page organizes the ADF4218LBRU specifications, verified sourcing context, same-package replacement options, application guidance, and PCB-focused design notes. It also highlights where an existing board can be reused without changing its TSSOP-20 footprint, while requiring normal electrical review of frequency range, reference voltage, loop settings, and channel requirements.
Drop-in-Alternativen für ADF4218LBRU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADF4218LBRU (gleiche Bauform und Footprint) – abweichend in Package, Device Type, Nominal Supply Voltage, Supply Voltage Range, Architecture.
ADF4212LBRUZ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADF4208BRUZ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADF4218LBRU Technische Daten
| Product Type | Dual RF/IF integer-N PLL frequency synthesizer |
| Architecture | 2 independent synthesizer channels |
| Supply Voltage Range | 2.6 V to 3.3 V |
| Nominal Supply Voltage | 3 V |
| Total Supply Current | 7.0 mA |
| Maximum Supply Current | 10 mA |
| Logic Compatibility | 1.8 V logic |
| Prescaler Configuration | Selectable dual-modulus prescaler values |
| Charge Pump | Programmable charge-pump currents |
| VP Connection | Separate VP connection |
| Phase Detector | Low-noise digital phase-frequency detector |
| Reference Divider | Programmable |
| Feedback Divider | Programmable |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | 85 °C |
| Temperature Grade | Industrial |
| Gehäuse | TSSOP-20 |
| Terminal Count | 20 terminals |
| Montageart | Surface mount |
ADF4218LBRU tssop-20 Pinbelegungsleitfaden
Pinbelegung für ADF4218LBRU (tssop-20-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ADF4218LBRU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADF4218LBRU ist geeignet für 6 Anwendungs: Wireless Transmitter Local Oscillator, Wireless Receiver RF and IF Conversion, Dual-Band RF Signal Source, Frequency-Hopping Communication Equipment, Test and Measurement Signal Source, Industrial RF Control System.
Wireless Transmitter Local Oscillator
The ADF4218LBRU fits a transmitter local-oscillator section that requires stable RF and IF frequency generation from a common reference. Its two integer-N PLL channels can reduce the number of separate synthesizer packages, while the 7.0 mA total supply current supports low-power RF designs. The 2.6 V to 3.3 V operating range and 1.8 V logic compatibility simplify connection to lower-voltage control hardware. The integrator should size the loop filter for the target phase noise and lock-time requirements, preserve short feedback paths, and verify that each VCO interface stays within the selected channel's tuning range.
Empfohlen
Wireless Receiver RF and IF Conversion
ADF4218LBRU is suitable for a receiver requiring coordinated RF and intermediate-frequency oscillators. One channel can establish the RF local-oscillator frequency while the second supports IF-related synthesis, allowing both signals to originate from a shared reference. This architecture can improve frequency relationship control and reduce board area compared with separate synthesizer solutions. Because the device is a dual RF/IF integer-N PLL, the receiver's channel plan determines divider ratios, prescaler values, and loop bandwidth. Validate phase-noise performance, spur levels, reference-divider ratio, and lock behavior under the lowest expected supply voltage.
Empfohlen
Dual-Band RF Signal Source
The ADF4218LBRU can support a dual-band signal source where two independently programmed output frequencies are required. Its two PLL channels, programmable reference and feedback dividers, and selectable dual-modulus prescalers provide the fundamental frequency-control functions for such a source. The 20-pin TSSOP package also makes the device practical for compact RF boards. A successful design must reconcile both channels' tuning limits with the chosen VCOs, calculate each loop filter separately when performance targets differ, and isolate the reference distribution network to prevent channel-to-channel modulation.
Empfohlen
Frequency-Hopping Communication Equipment
ADF4218LBRU can implement programmable RF and IF synthesis for frequency-hopping communication systems. Fast channel changes are achieved through the integrated reference and feedback dividers, dual-modulus prescalers, and programmable charge-pump currents, with the exact hop time determined by the selected loop bandwidth and filter. The low 7.0 mA total supply current is valuable in portable equipment, while the 2.6 V to 3.3 V range supports compact RF front ends. Validate hop-rate requirements experimentally because divider settings, VCO gain, loop damping, and the digital control sequence jointly determine settling time.
Empfohlen
Test and Measurement Signal Source
The ADF4218LBRU is appropriate for laboratory or embedded test equipment that requires two phase-locked RF or IF outputs with known frequency relationships. Sharing a reference can produce coherent outputs suitable for heterodyne measurement, interferer generation, or multi-frequency stimulus systems. The programmable dividers and charge pump allow the loop characteristics to be adapted to different tuning ranges, while the industrial temperature range supports controlled industrial environments. For accurate measurements, separate reference and feedback routing, careful grounding, and characterized loop filters are essential because phase noise and spurs can influence the resulting signal purity.
Empfohlen
Industrial RF Control System
ADF4218LBRU can supply controllable RF and IF signals in industrial monitoring, radio-control, or RF test systems. Its dual-channel architecture supports systems that need two related frequencies without duplicating complete PLL functions, and the 7.0 mA total supply current limits power use in distributed RF nodes. The -40 °C to 85 °C industrial temperature range supports deployment across controlled industrial environments. Designers should provide local supply decoupling, maintain a clean reference distribution path, and include a control path capable of programming the divider and charge-pump settings required by each operating channel.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADF4218LBRU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADF4212LBRUZ | ADF4208BRUZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | TSSOP-20 | TSSOP-20 - same | TSSOP-20 - same |
| Architecture | Dual RF/IF integer-N PLL | Clock generator with 2 synthesis circuits | Dual PLL frequency controller |
| Number of Circuits | 2 | 2 | 2 |
Wichtigste Unterscheidungsmerkmale
- Low-power dual-channel architecture (vs. ADF4212LBRUZ)
- Dual-band input-range option (vs. ADF4208BRUZ)
- Same-package design reuse with documented replacement path (vs. ADF4212LBRUZ)
Designhinweise
Route the reference, feedback, and charge-pump connections as short as practical, and keep them away from switching-regulator nodes and high-current return paths. Place the loop-filter components close to the associated charge-pump and VCO interface pins. Use a continuous ground reference beneath the device and avoid splitting return currents beneath the TSSOP footprint. These practices reduce reference noise, parasitic coupling, and phase-noise degradation in the dual PLL channels.
Decouple the 2.6 V to 3.3 V supply locally at the device, and verify operation at the minimum voltage expected in the completed system. The listed total supply current is 7.0 mA, but the external VCO and charge-pump loads can add to board-level demand. Keep the supply return path compact and maintain low-impedance connections from supply capacitors to the device. Review startup and settling behavior when the reference or VCO supply ramps slowly or outside the nominal sequence.
Do not select a replacement solely because it uses a 20-pin TSSOP package. Check the intended input-frequency range, reference frequency, divider limits, prescaler options, charge-pump settings, register map, and VCO tuning voltage. The ADF4212LBRUZ comparison lists a 10 MHz to 2.4 GHz input range, while ADF4208BRUZ is listed with a 2 GHz maximum input frequency. A footprint-compatible part still requires application-level verification before substitution.
Compliance-Informationen
The product information identifies an industrial-temperature ADF4218LBRU device but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.