Analog Devices

ADF4360-9BCPZRL - 400MHz PLL Synthesizer | Analog Devices

Teilenummer: ADF4360-9BCPZRL ✓ Aktiv
24-lead WFQFN with exposed pad Package 65 MHz to 400 MHz Speed
MOQ: 1 |

ADF4360-9BCPZRL Übersicht

Analog Devices ADF4360-9BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator for RF clock generation from 65 MHz to 400 MHz. The device uses external inductors to establish its VCO center frequency, provides an RF output up to 400 MHz, and includes an integer divider for CMOS clock outputs divided by 2 through 31. It is packaged in a 24-lead WFQFN with an exposed pad.

An integer-N PLL synthesizer is a clock-generation and timing IC that combines a phase-locked loop, voltage-controlled oscillator, programmable frequency dividers, and control interfaces. Within the broader clock and timing hierarchy, the ADF4360-9 sits between general-purpose clock generators and highly integrated RF transceiver frequency synthesizers. Its external resonant components allow the VCO frequency range to be tailored to the target RF band while the internal PLL locks the oscillator to a stable reference.

The central operating window is 65 MHz to 400 MHz. An integer divider extends the device beyond its direct VCO range by producing a divided CMOS output corresponding to the VCO frequency divided by an integer from 2 through 31. A three-wire control interface provides access to the on-chip registers, supporting programmable frequency selection and PLL configuration. These features make the device suitable for RF transceivers, radio equipment, test and measurement systems, clock-generation modules, and frequency-conversion front ends.

Because the VCO center frequency is established by external inductors rather than an internal resonator, PCB implementation is central to performance. The resonator network, loop filter, reference connections, supply decoupling, and RF output path must follow the layouts and component-selection guidance in the Analog Devices ADF4360-9 datasheet. Keeping sensitive control and feedback nodes compact helps limit parasitic effects while preserving stable phase-lock operation and predictable RF output behavior.

Typical deployments include local oscillator generation for RF transceivers, programmable reference generation for wireless equipment, auxiliary clock production for communication infrastructure, and laboratory instruments requiring a single synthesizer to cover multiple frequencies. The divided CMOS output can supply a lower-rate clock when the RF output does not need to drive the next stage directly.

A key design consideration is the relationship between the requested output frequency, divider setting, reference frequency, and external VCO components. The output stage and feedback loop must support the intended frequency and load, while the exposed thermal pad requires a suitable PCB thermal path. Review the recommended component values and layout before releasing a production board.

This page organizes the manufacturer specifications, sourcing structure, application guidance, and design considerations for ADF4360-9BCPZRL. It also distinguishes verified device functions from parameters that require confirmation in the datasheet, helping engineers evaluate the part without conflating packaging variants or unvalidated substitutes with a true drop-in replacement.

Drop-in-Alternativen für ADF4360-9BCPZRL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

ADF4360-9BCPZRL Technische Daten

Device Type Integrated integer-N synthesizer and voltage-controlled oscillator
VCO Frequency Range 65 MHz to 400 MHz
Maximum RF Output Frequency 400 MHz
Divider Output Range VCO frequency divided by 2 through 31
Divider Divisor Range 2 to 31
VCO Frequency Setting Method External inductors
Output Level CMOS
Control Interface 3-wire serial interface
Number of Dividers 1
Gehäuse 24-lead WFQFN with exposed pad
Package Pin Count 24 pins
Montageart Surface mount

ADF4360-9BCPZRL 24 pins Pinbelegungsleitfaden

Pinbelegung für ADF4360-9BCPZRL (24 pins-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ADF4360-9BCPZRL im 24 pins-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADF4360-9BCPZRL.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADF4360-9BCPZRL ist geeignet für 6 Anwendungs: RF Transceiver Local Oscillator, Wireless Communication Equipment, Programmable Test and Measurement Clock, Industrial Frequency Conversion, Communication Infrastructure Clocking, Low-Rate Auxiliary Clock Generation.

🌐

RF Transceiver Local Oscillator

The ADF4360-9BCPZRL fits an RF transceiver local-oscillator block when the required channel frequency falls within its 65 MHz to 400 MHz VCO range. The integrated integer-N synthesizer and VCO replace a separate oscillator and divider arrangement, while external inductors establish the desired VCO center frequency. According to the Analog Devices manufacturer datasheet, the divider can generate a CMOS clock at the VCO frequency divided by 2 through 31, allowing a single synthesis chain to support both RF drive and a lower-rate auxiliary clock. The design must include the recommended loop filter, reference routing, decoupling, and RF output network, with careful return paths around the exposed pad.

📡

Wireless Communication Equipment

The ADF4360-9BCPZRL is appropriate for programmable local-oscillator generation in wireless equipment operating below 400 MHz. Its 3-wire control interface allows a host processor or microcontroller to configure the integer-N frequency synthesizer, while the 65 MHz to 400 MHz range supports multiple RF channels when the external inductor network is selected appropriately. The divided CMOS output can provide a related clock to mixer, baseband, or timing circuitry when division by 2 through 31 is suitable. RF layout quality remains critical: maintain the datasheet reference loop, isolate the oscillator loop from digital return currents, and validate the resonator and matching components across temperature and supply tolerance.

🖥️

Programmable Test and Measurement Clock

The ADF4360-9BCPZRL can serve as the programmable RF clock core in laboratory instrumentation that requires a stable source between 65 MHz and 400 MHz. Register programming allows the output frequency to be changed as part of a test plan, and the integrated divider offers a lower CMOS clock output when the instrument needs both an RF stimulus and an auxiliary timing reference. For metrology-grade equipment, the complete signal chain must include a low-phase-noise reference, appropriate filtering, controlled power supplies, and calibration of amplitude and frequency. The external-inductor VCO arrangement makes board revisions necessary when moving to a substantially different frequency band, even though the synthesizer package itself remains unchanged.

🏭

Industrial Frequency Conversion

The ADF4360-9BCPZRL can support the oscillator stage of a frequency-conversion front end in industrial instrumentation, monitoring equipment, or compact RF modules. Its integrated VCO and integer-N PLL reduce the number of separate frequency-generation blocks, and the divider can create a related CMOS clock for downstream logic. The 65 MHz to 400 MHz operating window makes it useful for industrial RF bands covered by the device's specified range. Designers should tune the external inductor and loop filter for the intended channel, preserve short RF paths, decouple the supply close to the device, and verify lock behavior and phase noise under the worst-case load, temperature, and supply conditions.

🌐

Communication Infrastructure Clocking

The ADF4360-9BCPZRL can generate a programmable RF or auxiliary clock for communication infrastructure modules that operate within the 65 MHz to 400 MHz range. Combining the VCO and integer divider in one package simplifies the allocation of related clocks to RF and digital sections, while the 3-wire interface supports microcontroller-based configuration. A divided output is available at the VCO frequency divided by 2 through 31, which can reduce the number of separate divider chains. Deployment requires disciplined reference distribution, filtered supplies, controlled impedance routing, and isolation from high-current switching stages. Verify the synthesizer settings against each supported channel plan and qualify lock performance over the complete environmental range.

⚡

Low-Rate Auxiliary Clock Generation

The divided CMOS output of the ADF4360-9BCPZRL is useful when a module needs a related lower-rate clock in addition to an RF oscillator. With divider values from 2 through 31, the VCO signal can be converted into a clock suitable for digital timing, sampling, or communications circuitry when those loads meet the output specifications. According to the Analog Devices manufacturer datasheet, the output corresponds to the VCO frequency divided by the selected integer. The divider does not independently create a new frequency relationship, so the reference frequency and VCO configuration must be selected together. Keep the output route short, observe impedance and loading requirements, and validate the divider output's rise time and integrity with the intended receiver.

What is the ADF4360-9BCPZRL?
The ADF4360-9BCPZRL is an integrated integer-N PLL synthesizer and voltage-controlled oscillator with a 65 MHz to 400 MHz VCO range. According to the Analog Devices manufacturer datasheet, external inductors set the VCO center frequency, while an internal divider can divide the VCO signal by an integer from 2 through 31 to produce a CMOS output. The device is offered in a 24-lead WFQFN package with an exposed pad.
What frequency range does ADF4360-9BCPZRL generate?
The ADF4360-9BCPZRL supports a VCO frequency range from 65 MHz to 400 MHz, with the maximum RF output stated as 400 MHz. According to the Analog Devices product page and manufacturer datasheet, external inductors establish the VCO center frequency. The additional divider stage allows the CMOS output to represent the VCO frequency divided by any integer from 2 through 31, extending design flexibility within the supported operating range.
Where can I download the ADF4360-9BCPZRL datasheet PDF?
The official ADF4360-9BCPZRL datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-9.pdf. The manufacturer datasheet is the primary source for the complete pin description, recommended external-component values, register map, reference requirements, electrical characteristics, and reference PCB layouts. The ADF4360-9 product page provides an additional entry point for product information and documentation.
Where is the pinout for ADF4360-9BCPZRL?
The pinout for ADF4360-9BCPZRL is shown in the pin-description table and package drawing in the official Analog Devices ADF4360-9 manufacturer datasheet. The device uses a 24-lead WFQFN package with an exposed pad, so PCB designers should number the leads according to that drawing and connect the exposed thermal pad as directed. Do not infer pin functions from another package or from the related ADF4360-7 device.
Is ADF4360-9BCPZRL suitable for RF transceiver local oscillators?
The ADF4360-9BCPZRL is suitable for RF local-oscillator generation when the desired operating frequency lies within its 65 MHz to 400 MHz range. According to the Analog Devices manufacturer datasheet, the integrated integer-N synthesizer and VCO can provide the RF signal, while the 2-through-31 divider provides a lower CMOS clock output. External inductors, the loop filter, reference source, and RF matching network remain essential parts of the complete design.
What is the difference between ADF4360-9BCPZ and ADF4360-9BCPZRL?
The ADF4360-9BCPZ and ADF4360-9BCPZRL are identified as members of the same ADF4360-9 family, while their order codes use different package or shipping designations. The verified product information confirms the 24-lead WFQFN exposed-pad format for both entries. Before treating one as a substitution, confirm the exact temperature grade, tape-and-reel orientation, moisture level, and lead-finish requirements in the ordering information for each complete MPN.
Can ADF4360-7BCPZRL replace ADF4360-9BCPZRL?
No—not as a direct drop-in replacement based on the confirmed product information. The ADF4360-9BCPZRL supports a VCO range of 65 MHz to 400 MHz, whereas the ADF4360-7BCPZRL listing identifies a 1.8 GHz device with a maximum output of 1.8 GHz. Although both use 24-lead WFQFN exposed-pad packages, the frequency ranges are materially different, so pin compatibility does not establish electrical equivalence.
What can replace ADF4360-9BCPZRL?
No validated drop-in replacement for ADF4360-9BCPZRL can be identified from the available manufacturer and cross-reference information. A valid replacement must combine the same 24-lead WFQFN footprint, matching pin functions, compatible reference and control interfaces, suitable supply voltage, and a frequency architecture that covers the intended 65 MHz to 400 MHz operating range. The ADF4360-9BCPZ family entries are candidates for engineering review, but packaging or reel-code differences alone do not prove interchangeability.
When should I choose ADF4360-9BCPZRL over another PLL synthesizer?
Choose ADF4360-9BCPZRL when the design needs an integrated integer-N synthesizer and VCO covering 65 MHz to 400 MHz, with external inductors controlling the center frequency and a divided CMOS output available. According to the Analog Devices manufacturer datasheet, its divider supports division by 2 through 31. Selection should also account for reference frequency, phase-noise requirements, register programming, RF output level, and the recommended external components.
Is ADF4360-9BCPZRL suitable for laboratory clock generation?
The ADF4360-9BCPZRL can support programmable laboratory clock generation within the 65 MHz to 400 MHz VCO range. Its 3-wire interface permits register configuration, and the integrated divider can generate a CMOS clock divided by 2 through 31. For instrumentation, phase noise, reference purity, output amplitude, and calibration requirements must also be evaluated because the device is a frequency synthesizer rather than a complete wideband arbitrary waveform generator.
How does the divider affect ADF4360-9BCPZRL output frequency?
The ADF4360-9BCPZRL divider produces a CMOS output equal to the VCO frequency divided by an integer from 2 through 31. According to the Analog Devices manufacturer datasheet, the direct RF path can operate up to 400 MHz, while the divided path extends clock-generation options for downstream circuits. The chosen divisor, reference frequency, PLL settings, and external VCO components must produce the intended output without violating the device's specified operating limits.
What power and thermal considerations apply to ADF4360-9BCPZRL?
The ADF4360-9BCPZRL uses a 24-lead WFQFN package with an exposed pad, making PCB heat dissipation an essential layout consideration. The power dissipated depends on supply voltage, output loading, operating frequency, and PLL configuration, which are not fully stated in the product summary. Use the electrical characteristics and thermal information in the Analog Devices manufacturer datasheet, provide a continuous ground-plane path beneath the exposed pad, and follow the recommended layout.
Where can I buy ADF4360-9BCPZRL and check its price?
Use the Request a Quote form on this page to request current ADF4360-9BCPZRL pricing, stock confirmation, and lead time for the exact 24-lead WFQFN ordering code. The manufacturer identifies ADF4360-9 as a current product family, but pricing and inventory change frequently. A seller should also confirm whether the requested MPN is supplied as the specified tape-and-reel configuration and whether any assembly or test requirements apply.
What are the key specifications of ADF4360-9BCPZRL that engineers should know?
The key confirmed specifications are a 65 MHz to 400 MHz VCO range, a maximum RF output of 400 MHz, an integer divider covering division by 2 through 31, a 3-wire control interface, external-inductor frequency setting, and a 24-lead WFQFN exposed-pad package. According to the Analog Devices manufacturer datasheet, these functions form an integrated integer-N synthesizer and voltage-controlled oscillator. Supply voltage, reference input, phase noise, and temperature limits require consultation of the complete electrical tables.
Does ADF4360-9BCPZRL support RoHS, REACH, or AEC-Q100?
The RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status of ADF4360-9BCPZRL cannot be confirmed from the cited product information. For a production release, obtain the current manufacturer material-compliance declaration and the exact ordering-code qualification information. If the device will enter an automotive or other regulated production program, confirm AEC-Q100 qualification and the applicable temperature grade directly with Analog Devices rather than assuming it from the family name.

Technische Referenzdaten für ADF4360-9BCPZRL – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ADF4360-9BCPZRL when the design requires an integrated integer-N PLL and VCO operating from 65 MHz to 400 MHz, especially when the system also benefits from a divided CMOS output. It is a strong fit for RF transceiver local oscillators, programmable communication modules, industrial RF conversion, and test equipment. The external-inductor VCO makes component and layout tuning part of the design process, so verify the target band and reference plan early. Do not select ADF4360-7BCPZRL as a drop-in substitute for lower-frequency applications because its identified 1.8 GHz architecture targets a materially different range. Before substituting another manufacturer or family, require proof of the same 24-lead footprint, matching pin functions, compatible electrical conditions, and equivalent phase-noise and lock performance. Packaging-only order-code changes should also be reviewed for temperature grade, moisture level, reel orientation, and assembly requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Analog Devices
Package 24-lead WFQFN with exposed pad
Device Function Integrated integer-N synthesizer and voltage-controlled oscillator
VCO Frequency Range 65 MHz to 400 MHz
Maximum RF Output Frequency 400 MHz
Divider Divisor Range 2 to 31
Output Level CMOS
Control Interface 3-wire serial interface
VCO Frequency Setting Method External inductors
Number of Dividers 1

Wichtigste Unterscheidungsmerkmale

  • Wide confirmed VCO operating window (vs. ADF4360-7BCPZRL)
  • Integrated divided CMOS clock output (vs. ADF4360-7BCPZRL)
  • Programmable integer-N synthesis with external-inductor tuning (vs. ADF4360-7BCPZRL)

Designhinweise

Follow the Analog Devices ADF4360-9 reference layout closely, particularly the loop-filter components, VCO resonator connections, RF output path, and supply decoupling. Keep the external-inductor network compact and reproduce the recommended grounding topology. The 24-lead WFQFN exposed pad should connect to a low-impedance ground plane, and RF traces should use controlled geometry where the application requires impedance matching.

Place the required supply capacitors adjacent to the relevant device pins and keep the supply return path short to reduce disturbance of the VCO and PLL. Before selecting the supply, confirm the complete operating range, current consumption, and decoupling requirements in the Analog Devices manufacturer datasheet. Avoid sharing narrow supply traces with high-current switching loads because even small voltage variations can affect oscillator behavior and phase-lock performance.

Treat the VCO, RF output, divider output, and feedback paths as controlled-impedance signals when the operating frequency or trace length makes distributed effects significant. Keep sensitive nodes away from switching nodes and maintain continuous ground references beneath high-frequency routes. Measure the divider output at the intended receiver, including loading and clock-edge quality, because divider operation alone does not guarantee adequate timing margin for every downstream device.

Do not treat ADF4360-7BCPZRL as an interchangeable substitute merely because both use a 24-lead WFQFN exposed-pad package. The ADF4360-9 family covers 65 MHz to 400 MHz, while the ADF4360-7 listing identifies a 1.8 GHz device. Likewise, verify the exact ordering suffix, temperature grade, shipping format, and pin functions before approving any change. Use the complete MPN and its ordering information as the basis for BOM control.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The cited product information does not provide explicit compliance declarations or AEC-Q100 qualification status for this exact ordering code. Confirm current material-compliance and qualification documentation with Analog Devices before production release.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-9BCPZRL datasheet ADF4360-9BCPZRL datasheet pdf ADF4360-9BCPZRL pinout ADF4360-9BCPZRL replacement ADF4360-9BCPZRL equivalent ADF4360-9BCPZRL price ADF4360-9BCPZRL stock ADF4360-9BCPZRL application circuit ADF4360-9 400MHz PLL synthesizer ADF4360-9BCPZRL WFQFN footprint

Verwandte Bauteile & Begriffe

Analog Devices ADF4360-9BCPZRL ADF4360-9 ADF4360-7BCPZRL integer-N frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL frequency synthesizer clock and timing IC RF local oscillator frequency divider CMOS output 3-wire serial interface external inductor 65 MHz 400 MHz 24-lead WFQFN QFN family surface-mount package exposed pad programmable clock generator RF transceiver phase noise
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen