ADSP-1016AJD/+ - 16-Bit CMOS Multiplier | Analog Devices
Teilenummer: ADSP-1016AJD/+ ✓ AktivADSP-1016AJD/+ Übersicht
An analog multiplier is a signal-processing IC whose output represents the product of two input voltages or codes. It belongs to the broader analog multiplier hierarchy, which is part of analog and mixed-signal signal-processing ICs. Unlike a general-purpose microprocessor or DSP, the ADSP-1016AJD/+ performs multiplication directly in the analog signal path. This can simplify control loops, modulation products, error calculations, and precision signal-conditioning circuits when the surrounding system is designed around the device's electrical characteristics.
The primary verified features are the 16 x 16 CMOS multiplier core, programmable analog multiplier/divider operation, and a hermetically sealed CDIP-64 package. The ceramic side-brazed construction and sealed package support applications that require environmental robustness and long service life. The large 64-pin interface provides access to multiplier inputs, control logic, output stages, supply connections, and associated functions. Exact numerical details such as supply voltage, bandwidth, accuracy, input range, and logic levels require confirmation from the manufacturer datasheet.
The ADSP-1016AJD/+ uses CMOS circuitry to implement its multiplication function. Its architecture is suited to precision control systems in which multiplication of two related variables is required repeatedly. The manufacturer positions the device as a programmable analog multiplier and divider, allowing a system designer to use it for signal products, analog computation, control-loop error terms, and related modulation functions. Operating-temperature ratings, settling behavior, and noise specifications cannot be confirmed from the supplied search results.
Typical applications include precision servo and motion-control systems, industrial process measurement, instrumentation signal conditioning, communications modulation, analog signal analysis, and embedded DSP-adjacent control logic. In these systems, the multiplier can calculate a product term directly rather than requiring repeated software multiplication. The hermetically sealed CDIP-64 package is particularly useful where long product life and resistance to environmental exposure matter, although thermal verification is required for the actual board layout and enclosure.
Designers should verify the official pinout, supply rails, signal input ranges, control timing, and output loading before designing a new PCB. Because this is a 64-pin through-hole ceramic package, layout planning must include adequate hole spacing, connector clearance, and mechanical support. Decoupling should follow the manufacturer datasheet once the pin assignments and recommended capacitors are confirmed.
This product page combines verified distributor inventory information, package identification, pricing evidence, and replacement searches with engineering-focused selection guidance. It also distinguishes confirmed drop-in alternatives from unreferenced package variants, helping procurement and design teams avoid assuming that a similar amplifier or multiplier is electrically and mechanically interchangeable.
Drop-in-Alternativen für ADSP-1016AJD/+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernADSP-1016AJD/+ Grenzwerte & elektrische Eigenschaften
| Product Type | Programmable analog multiplier and divider |
| Multiplier Architecture | 16 x 16 CMOS multiplier |
| Multiplier Word Size | 16-bit x 16-bit |
| Package Type | Hermetically sealed, side-brazed ceramic DIP-64 |
| Package Designation | CDIP-64 |
| Total Pin Count | 64 pins |
| Montageart | Through-hole |
| Device Category | Analog multiplier/divider and DSP peripheral |
| Programmability | Programmable multiplier/divider |
| Process Technology | CMOS |
ADSP-1016AJD/+ cdip-64 Pinbelegungsleitfaden
Pinbelegung für ADSP-1016AJD/+ (cdip-64-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für ADSP-1016AJD/+.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADSP-1016AJD/+ ist geeignet für 6 Anwendungs: Precision Servo Control, Industrial Process Measurement, Communications Modulation, Analog Signal Analysis, Instrumentation Signal Conditioning, Long-Life Industrial Control Equipment.
Precision Servo Control
The ADSP-1016AJD/+ is appropriate for a servo error calculation in which two control variables must be multiplied to produce a proportional or cross-coupled command. Its confirmed 16 x 16 CMOS multiplier core provides a dedicated multiplication function rather than offloading the operation to a general-purpose processor. In an analog servo loop, the device can form the product of position-related and velocity-related signals before feedback to a controller. The hermetically sealed CDIP-64 package may also suit long-life industrial equipment. Final suitability requires the official datasheet for accuracy, bandwidth, input range, supply voltage, output drive, and temperature limits; those figures are not available in the verified search results.
Empfohlen
Industrial Process Measurement
The ADSP-1016AJD/+ can support measurement systems that calculate a product term, such as scaling a sensor signal by a calibration factor or command value. Its verified 16 x 16 CMOS multiplier architecture allows multiplication to occur directly within the analog signal path, potentially simplifying control logic and reducing repetitive software work. The CDIP-64 package provides 64 externally accessible leads for signal routing, supply distribution, and control functions, although exact pin assignments must be confirmed. Before selecting the device for factory instrumentation, engineers should verify accuracy drift, bandwidth, noise, temperature range, and supply requirements from the official Analog Devices documentation.
Empfohlen
Communications Modulation
The ADSP-1016AJD/+ is applicable to communications or modulation circuits that need a product of two signal variables. The verified product descriptions identify the device as a programmable analog multiplier/divider, making it useful where a mixer-like product term is required in a precision signal-processing chain. Its dedicated 16 x 16 CMOS core can operate as the multiplication element in an amplitude-modulation, phase-error, or compensation block. Engineers must confirm whether the available inputs and outputs satisfy the required voltage range and bandwidth. The hermetically sealed ceramic DIP package may benefit communication equipment requiring long-lived components, but EMC and thermal validation remain essential.
Empfohlen
Analog Signal Analysis
The ADSP-1016AJD/+ can serve as a dedicated product-forming element in an analog signal-analysis system. Its confirmed 16 x 16 CMOS multiplier core is suited to calculations involving two correlated variables, such as power-proxy, cross-correlation, or error measurements. This allows an instrumentation design to place multiplication close to the sensor interface while another controller handles sequencing and data capture. The hermetically sealed, side-brazed CDIP-64 package provides a rugged mechanical format for laboratory and industrial equipment. Exact usability depends on verifying input impedance, output range, settling time, gain accuracy, supply rails, and control timing from the official manufacturer documentation before analog prototyping begins.
Empfohlen
Instrumentation Signal Conditioning
The ADSP-1016AJD/+ is suited to signal-conditioning paths that require scaling a sensor output by a programmable coefficient. The verified 16 x 16 CMOS multiplier/divider core allows a system to form a product term without implementing a general-purpose digital calculation loop. In test and measurement equipment, this could support gain control, reference compensation, or calibration functions. Its 64-pin ceramic DIP package requires a through-hole board layout and mechanical clearance, while the hermetic construction is consistent with long-lived laboratory instruments. Before implementation, compare the manufacturer's verified accuracy, bandwidth, output loading, and power specifications with the measurement specification; those critical numerical parameters are unavailable in the supplied distributor snippets.
Empfohlen
Long-Life Industrial Control Equipment
The ADSP-1016AJD/+ can be considered for long-life industrial control equipment that needs a hermetically sealed analog multiplier rather than a plastic surface-mount package. The verified package description specifies a ceramic DIP-64 with side-brazed, hermetically sealed construction, and the device provides a programmable 16 x 16 CMOS multiplication function. This combination can suit legacy or high-reliability control platforms where through-hole assembly and environmental resistance are priorities. The package's 64 leads also require careful connector spacing and board-layout planning. Qualification should include checking the exact operating-temperature grade, power dissipation, environmental test requirements, and lifecycle status with Analog Devices or an authorized sourcing specialist.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADSP-1016AJD/+ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Manufacturer | Analog Devices |
| Device Type | Programmable analog multiplier and divider |
| Multiplier Architecture | 16 x 16 CMOS |
| Package | Hermetically sealed, side-brazed CDIP-64 |
| Mounting Type | Through-hole |
| Programmability | Programmable multiplier/divider |
| Verified Stock Listing | 2,600 pieces reported by Components-House |
| Verified Starting Unit Price | $35.62 as of 2026-10-29 |
| Drop-In Alternatives Identified | None confirmed from supplied cross-reference data |
Wichtigste Unterscheidungsmerkmale
- Dedicated multiplication function (vs. General-purpose amplifier)
- Hermetically sealed ceramic construction (vs. Typical plastic surface-mount analog IC)
- Programmable multiplier/divider role (vs. Fixed-gain analog multiplier)
Designhinweise
Treat the ADSP-1016AJD/+ as a 64-pin through-hole ceramic DIP rather than a compact surface-mount component. Confirm every signal and supply pin against the official Analog Devices pinout before routing the PCB. Preserve connector and component clearance around the side-brazed ceramic body, and ensure the board can mechanically support the package. The verified data identifies a CDIP-64 package but does not provide the manufacturer land pattern or pin names, so no equivalent footprint should be inferred from generic DIP libraries.
Determine the ADSP-1016AJD/+ supply voltage and quiescent current from the official datasheet before designing the power rails and decoupling network. The verified snippets do not specify either value, so adding capacitors or assuming a logic level would be speculative. Follow the manufacturer recommendations for bypass capacitance, pin placement, and startup behavior once available. Check the complete system for the worst-case voltage and temperature when calculating regulator headroom and supply ripple tolerance.
Design the analog multiplier inputs and outputs around the manufacturer's verified impedance, range, bandwidth, and settling-time limits. Those parameters are not included in the supplied search results, so prototype comparisons should not assume that the 16 x 16 CMOS core alone defines usable precision. Keep sensitive analog routing away from digital control and clock lines, use a quiet reference and supply arrangement, and evaluate the complete conditioning chain for gain error, offset, noise, and settling requirements.
Estimate the ADSP-1016AJD/+ power dissipation only after obtaining the verified supply voltage, quiescent current, and output current for the intended operating mode. Use the resulting dissipation and the manufacturer thermal information to assess temperature rise in the enclosure. Do not rely on the sealed ceramic package as a substitute for thermal design. Because no thermal-resistance or operating-temperature values were supplied, this product data intentionally leaves those specifications unresolved.
Compliance-Informationen
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable because this is an Analog Devices precision IC rather than an automotive-qualified variant identified in the supplied data.
