ADSP-SC571BSWZ-4 - 450MHz SHARC+ DSP | Analog Devices
Teilenummer: ADSP-SC571BSWZ-4 ✓ AktivADSP-SC571BSWZ-4 Übersicht
A digital signal processor is a semiconductor optimized for real-time filtering, signal analysis, control, and communication workloads. Unlike a general-purpose processor, the ADSP-SC57x architecture combines deterministic parallel processing with a higher-level Arm control environment. Within the product hierarchy, it combines a digital signal processor, an embedded Arm Cortex-A5 processor, a 10/100 Ethernet interface, and a high-density LQFP-176 system-on-chip.
Three headline capabilities define this processor. Each of the two SHARC+ cores operates at 450 MHz for computationally intensive fixed- and floating-point work. The Arm Cortex-A5 core supports operating-system-level tasks and external communication, while the 768 KB L1 and 1 MB shared L2 memories reduce external-memory traffic during repeated signal-processing operations. The integrated 10/100 Ethernet interface adds network connectivity without requiring a separate interface device.
The ADSP-SC571BSWZ-4 belongs to the ADSP-SC57x SHARC family and combines SHARC+ and Arm processor domains in one package. The dual SHARC+ arrangement can distribute independent signal chains across cores, while the Cortex-A5 domain handles control-plane tasks. This heterogeneous organization is useful when a design must process high-rate samples while also supporting networking, configuration, or supervisory functions.
Typical applications include industrial audio and communications equipment, networked industrial control, professional audio processing, real-time test equipment, and embedded systems that perform high-throughput filtering. The Ethernet interface supports connected industrial equipment, while the parallel DSP architecture suits fixed-point filtering, FFT-based analysis, and real-time signal transformation. A system requiring deterministic throughput without a separate network controller is a particularly strong match.
Power-system design must account for the processor's processing load, core activity, I/O activity, and exposed-pad heat removal. High-speed memory interfaces and external interfaces also require careful PCB return-path and decoupling decisions. Before schematic release, compare every power rail, boot configuration, Ethernet route, and exposed-pad land pattern against the manufacturer reference design and pin-description table.
This product page consolidates processor configuration, package details, sourcing information, replacement analysis, and application-oriented design guidance. It is intended to help engineers evaluate the ADSP-SC571BSWZ-4 against pin-compatible options while preserving the specialized requirements of a dual-core SHARC+ system.
Drop-in-Alternativen für ADSP-SC571BSWZ-4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADSP-SC571BSWZ-4 (gleiche Bauform und Footprint) – abweichend in Package, Architecture, Product Type, Maximum Clock Frequency, Processor Type.
ADSP-SC571KSWZ-4
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADSP-SC571BSWZ-3
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADSP-SC571BSWZ-5
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADSP-BF512BSWZ-4F4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADSP-SC570BSWZ-4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →ADSP-SC571BSWZ-4 Technische Daten
| Processor Type | Fixed/Floating Point Digital Signal Processor (DSP) |
| SHARC+ Core Count | 2 cores |
| SHARC+ Core Frequency | 450 MHz per core |
| Embedded Processor | Arm Cortex-A5 |
| L1 Cache | 768 KB |
| Shared L2 Cache | 1 MB |
| Ethernet Interface | 10/100 Ethernet |
| Gehäuse | 176-LQFP-EP, 24 mm x 24 mm |
| Package Type | LQFP with exposed pad |
| Montageart | Surface Mount |
| Lead Count | 176 leads |
| Series | ADSP-SC57x / SHARC+ |
| Core Architecture | Dual SHARC+ with Arm Cortex-A5 |
| Maximale Taktfrequenz | 450 MHz |
ADSP-SC571BSWZ-4 lqfp with exposed pad Pinbelegungsleitfaden
Pinbelegung für ADSP-SC571BSWZ-4 (lqfp with exposed pad-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ADSP-SC571BSWZ-4.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADSP-SC571BSWZ-4 ist geeignet für 6 Anwendungs: Industrial Audio Processing, Networked Industrial Control, Real-Time Communications, Professional Audio Conversion, Test and Measurement Equipment, Vibration and Condition Monitoring.
Industrial Audio Processing
The ADSP-SC571BSWZ-4 fits industrial audio processing because its two 450 MHz SHARC+ cores can execute parallel filtering, mixing, and real-time spectral analysis while the Arm Cortex-A5 core manages configuration and communications. The 768 KB L1 cache and 1 MB shared L2 cache help retain working data close to the DSP engines. A typical design would place the processor between multichannel audio converters and an Ethernet-controlled system, then use the processor’s deterministic execution to maintain stable channel timing. The principal trade-off is thermal load: sustained multi-core operation requires a properly designed exposed-pad land pattern and sufficient copper area to keep junction temperature within the selected grade’s limits.
Empfohlen
Networked Industrial Control
The ADSP-SC571BSWZ-4 is suitable for networked industrial control when a machine must combine real-time signal analysis with an Ethernet supervisory channel. One SHARC+ core can execute motor or vibration analysis while the second handles another measurement chain, and the Cortex-A5 core can host control-plane tasks. Its integrated 10/100 Ethernet capability provides a network path for configuration, monitoring, and diagnostics. The design should define network latency and packet-loss requirements early, because the Ethernet interface and software stack must satisfy the control-loop architecture. Thermal and EMC qualification should also account for sustained processing near the processor’s 450 MHz clock rate and industrial enclosure conditions.
Empfohlen
Real-Time Communications
The ADSP-SC571BSWZ-4 can support communications equipment that performs modulation, filtering, spectrum analysis, or packet-oriented signal conditioning. Its two SHARC+ cores provide parallel execution at 450 MHz, while the Arm Cortex-A5 core can handle protocol logic, networking services, and supervisory code. The 1 MB shared L2 cache offers a larger local working region than the individual L1 caches, which can reduce repeated external-memory transfers during block processing. System designers should preserve predictable DDR memory behavior and isolate high-speed clocks and Ethernet signals from sensitive analog sections. Because communications designs are sensitive to latency and determinism, software timing should be measured on the final hardware rather than inferred from nominal core frequency alone.
Empfohlen
Professional Audio Conversion
The ADSP-SC571BSWZ-4 fits professional audio conversion systems that combine high-rate sampling with real-time mixing and control. The two SHARC+ cores can divide processing among channels, perform equalization and dynamics processing, and prepare data for transmission or storage, while the Cortex-A5 core manages USB, network, or control protocols. Its 768 KB L1 cache supports low-latency local operations, and the 1 MB shared L2 cache accommodates larger intermediate buffers. Analog-to-digital and digital-to-analog converters should be connected according to the manufacturer’s timing and grounding architecture. Power-supply sequencing, analog/digital separation, and exposed-pad heat removal are critical to avoid degrading the low-noise audio path.
Empfohlen
Test and Measurement Equipment
The ADSP-SC571BSWZ-4 is appropriate for test and measurement equipment requiring fast analysis of captured data. The dual SHARC+ architecture can process multiple acquisition channels concurrently at 450 MHz, perform real-time FFT and filter operations, and transfer summarized results through the 10/100 Ethernet interface. The Arm Cortex-A5 domain can coordinate instrument control, remote procedures, and user-facing services. For bench instruments, thermal design should support the worst sustained test vector rather than an idle condition, and the clocking architecture must meet the acquisition system’s jitter tolerance. Firmware should also separate deterministic acquisition processing from non-real-time management tasks to preserve measurement repeatability.
Empfohlen
Vibration and Condition Monitoring
The ADSP-SC571BSWZ-4 can perform real-time vibration analysis in industrial condition-monitoring equipment. Each SHARC+ core can process a separate sensor stream, execute filtering and spectral transforms, or divide the bandwidth of one high-rate channel, while the Cortex-A5 core handles configuration, alarms, and Ethernet reporting. The 10/100 Ethernet interface allows the monitor to transmit compact feature data rather than continuous raw samples, reducing network load. Mechanical installations impose long duty cycles, so the processor should be thermally validated inside the final enclosure and use a watchdog and brownout strategy appropriate for industrial power quality. Sensor excitation, analog isolation, and digital processing should be partitioned carefully to prevent switching and clock coupling from contaminating the measurement result.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADSP-SC571BSWZ-4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADSP-SC571KSWZ-4 | ADSP-SC571BSWZ-3 | ADSP-SC571BSWZ-5 | ADSP-BF512BSWZ-4F4 | ADSP-SC570BSWZ-4 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP-EP (24x24 mm) | 176-LQFP-EP (24x24 mm) | 176-LQFP-EP (24x24 mm) | 176-LQFP-EP (24x24 mm) | 176-LQFP-EP (24x24 mm) | 176-LQFP-EP (24x24 mm) |
Wichtigste Unterscheidungsmerkmale
- Combines two 450 MHz SHARC+ DSP cores with an Arm Cortex-A5 in one package (vs. ADSP-SC571KSWZ-4)
- Provides a 450 MHz processing target with 768 KB of L1 cache (vs. ADSP-SC571BSWZ-3)
- Integrates 10/100 Ethernet with the dual SHARC+ processing domain (vs. ADSP-BF512BSWZ-4F4)
Designhinweise
Treat the 176-LQFP-EP exposed pad as the processor's primary thermal path. Follow the manufacturer land pattern, fill the pad with copper, and place a dense array of thermal vias according to the PCB stack-up. Do not rely on a narrow solder connection to transfer heat from the die. Validate the worst-case core load, ambient temperature, airflow, and copper exposure in the final enclosure because nominal 450 MHz operation does not define sustained thermal performance.
Implement every supply rail, regulator, decoupling capacitor, and power-sequence connection exactly as specified by the Analog Devices hardware design guide. Place the required bulk and high-frequency capacitors close to their associated pins, use short supply and ground paths, and preserve the recommended via pattern at each decoupling location. Check startup current, regulator current limit, voltage tolerance, and rail sequencing under the highest processor operating state before releasing the schematic.
Preserve continuous return paths beneath the Arm Cortex-A5, SHARC+, external-memory, and Ethernet interfaces. Match length and impedance according to the board stack-up and the manufacturer interface guidance, and avoid placing high-current switching paths beneath sensitive clock or memory routing. Isolate analog and digital ground systems only where the reference design specifies a controlled connection. Review the complete pin-description table and exposed-pad drawing together because a valid mechanical footprint alone does not establish electrical equivalence.
Do not approve a substitute processor solely because it uses a 176-LQFP-EP package. Confirm pin names, supply rails, boot options, clock generation, memory interface, Ethernet implementation, exposed-pad connection, and reset behavior for the exact ordering code. Rebuild or update software if the replacement changes cache, timing, peripheral behavior, or boot sequencing. A hardware drop-in decision should be followed by schematic review, bootloader validation, and a representative board test.
Compliance-Informationen
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. AEC-Q100 is not applicable to this industrial processor configuration.