ADV7281WBCPZ-RL - 10-Bit SDTV Video Decoder | ADI
Teilenummer: ADV7281WBCPZ-RL ✗ AbgekündigtADV7281WBCPZ-RL Übersicht
A video decoder is an interface IC that converts legacy analog composite, S-Video, or component video into a digital pixel stream suitable for display, processing, or capture electronics. Within the signal-chain hierarchy, the ADV7281 belongs to the video interface IC category and bridges analog video sources to digital bus-oriented processing systems.
The device automatically detects worldwide NTSC, PAL, and SECAM analog baseband signals. Its 8-bit parallel data output is carried on pins P0 through P7, while a line-locked clock provides the timing reference. A 2-wire I2C-compatible serial interface supports configuration and control. Differential inputs and oversampling support the decoder's role in professional video, broadcast, security, and industrial imaging equipment.
Internally, the ADV7281 performs analog-to-digital conversion, decoding, color processing, and digital output formatting within one device. The datasheet describes diagnostic functionality through programmable reference comparison and slice-level controls, allowing a diagnostic signal to indicate when a monitored level is exceeded.
Typical uses include SDTV video capture, broadcast monitoring, CCTV and surveillance camera interfaces, industrial imaging, video walls, and legacy video-to-digital equipment. The 32-LFCSP construction supports compact designs, while the exposed pad assists thermal performance when the board provides suitable copper area.
For implementation, follow the manufacturer’s recommended analog input network, supply decoupling, clock connections, and exposed-pad layout. Differential input routing should be compact and appropriately terminated, and the I2C address and register configuration must be checked against the host controller before enabling normal video output.
This page combines device-specific decoding capabilities, verified package and lifecycle information, same-family replacement options, interface comparisons, and practical PCB guidance to support faster component selection and implementation.
Drop-in-Alternativen für ADV7281WBCPZ-RL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
ADV7281WBCPZ-M-RL
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADV7281AWBCPZ-M-RL
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADV7281WBCPZ-M
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADV7281WBCPZ-MA
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADV7281A
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADV7281WBCPZ-RL Technische Daten
| Product Type | 10-bit SDTV video decoder |
| Oversampling | 4× |
| Analog Input Architecture | Differential inputs |
| Digital Output | YCrCb 4:2:2 video data |
| Video Output Standard | ITU-R BT.656 |
| Supported Video Standards | NTSC, PAL, and SECAM |
| Control Interface | 2-wire I2C-compatible serial interface |
| Parallel Data Output | 8-bit output on P0 through P7 |
| Clock Output | Line-locked clock (LLC) |
| Gehäuse | 32-lead LFCSP, 5 mm × 5 mm × 0.75 mm |
| Package Thermal Feature | Exposed pad |
| Montageart | Surface mount |
| Shipping Format | Tape and reel |
ADV7281WBCPZ-RL exposed pad Pinbelegungsleitfaden
Pinbelegung für ADV7281WBCPZ-RL (exposed pad-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ADV7281WBCPZ-RL.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADV7281WBCPZ-RL ist geeignet für 6 Anwendungs: Analog CCTV Camera Interface, Broadcast Video Monitoring, Industrial Vision Control, Legacy Video Capture Card, Video Wall Image Conversion, Video Test and Measurement.
Analog CCTV Camera Interface
The ADV7281WBCPZ-RL fits legacy analog surveillance systems that must convert composite or supported component video into a digital stream for recording or display. Its 10-bit, 4× oversampled decoder automatically detects NTSC, PAL, and SECAM, while differential analog inputs help reject common-mode noise coupled into camera cabling. The YCrCb 4:2:2 output follows ITU-R BT.656, allowing the decoded pixels and line-locked clock to feed an FPGA, media processor, or digital capture block. Design the input network for the camera’s signal amplitude, add appropriate connector protection, and maintain short return paths from the differential input pins to the analog ground reference.
Empfohlen
Broadcast Video Monitoring
The ADV7281WBCPZ-RL is appropriate for broadcast monitoring equipment that must ingest standard analog baseband signals and provide a digital video representation. Automatic NTSC, PAL, and SECAM detection simplifies multi-standard installations, while the 10-bit, 4× oversampled conversion preserves compatibility with conventional studio signal chains. The decoder produces YCrCb 4:2:2 data over the P0 through P7 outputs and supplies a line-locked clock for downstream synchronization. In a professional monitor, the analog front end should include controlled termination, shielding, and low-noise grounding so that connector and routing noise do not obscure the decoded image.
Empfohlen
Industrial Vision Control
The ADV7281WBCPZ-RL can serve as the legacy video front end in an industrial vision system where a camera or test fixture produces standard analog video. Its differential inputs, multiformat detection, and digital BT.656 output bridge older imaging equipment to programmable logic or a vision processor. The 32-LFCSP package permits placement close to the analog source, reducing sensitive trace length and helping keep the decoded image deterministic. Engineers should use solid ground planes, separate analog and digital supply routing, and the manufacturer’s exposed-pad via pattern. Firmware should verify the configured video standard and timing through the I2C-compatible control interface before accepting captured frames.
Empfohlen
Legacy Video Capture Card
The ADV7281WBCPZ-RL is useful in a compact legacy capture card that accepts analog video and transfers decoded pixels to a host processor. The 8-bit parallel P0 through P7 output and line-locked clock support deterministic connections to programmable logic, while the 2-wire I2C-compatible interface allows a controller to configure operating registers. Differential input routing should be treated as a high-value analog net, with matched geometry and minimal via transitions. Because the device is based on a 5 mm × 5 mm LFCSP with an exposed pad, the layout must reserve adequate copper and thermal vias for reliable operation without relying on airflow.
Empfohlen
Video Wall Image Conversion
The ADV7281WBCPZ-RL can support image-conversion modules used in video walls and multi-display installations that still receive standard-definition analog sources. Its automatic standard detection avoids manual selection between NTSC, PAL, and SECAM sources, while 4× oversampling supports the required analog-to-digital conversion. The YCrCb 4:2:2 output can be routed into scaling or frame-buffer logic before display processing. Keep the analog input section away from switching-regulator inductors and high-current display outputs, and reference the differential pair to the device’s quiet analog ground. Validate timing and color ordering with the target display pipeline because transport changes do not alter the decoder’s output standard.
Empfohlen
Video Test and Measurement
The ADV7281WBCPZ-RL is appropriate for legacy video test equipment that needs to decode composite, S-Video, or component inputs for measurement and diagnostics. The device’s differential inputs suit a controlled analog fixture, and the 10-bit conversion path provides a digital representation that can be compared with expected raster timing and color data. The programmable diagnostic reference and slice-level controls add a way to monitor signal excursions through the DIAG functions described by the manufacturer. For laboratory equipment, isolate the analog input from instrument power converters and use controlled grounding to avoid interpreting switching artifacts as source-video errors.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADV7281WBCPZ-RL – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADV7281WBCPZ-M-RL | ADV7281AWBCPZ-M-RL | ADV7281WBCPZ-M | ADV7281WBCPZ-MA | ADV7281A |
|---|---|---|---|---|---|---|
| Package | 32-lead LFCSP (5 mm × 5 mm × 0.75 mm) | 32-lead LFCSP (5 mm × 5 mm) | 32-lead LFCSP (5 mm × 5 mm) | 32-lead LFCSP (5 mm × 5 mm) | 32-lead LFCSP (5 mm × 5 mm) | 32-lead LFCSP (5 mm × 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Oversampling | 4× | 4× | 4× | 4× | 4× | 4× |
| Analog Inputs | Differential | Differential | Differential | Differential | Differential | Differential |
| Digital Output Format | ITU-R BT.656 YCrCb 4:2:2 | ITU-R BT.656 YCrCb 4:2:2 | ITU-R BT.656 YCrCb 4:2:2 | ITU-R BT.656 YCrCb 4:2:2 | ITU-R BT.656 YCrCb 4:2:2 | ITU-R BT.656 YCrCb 4:2:2 |
| Supported Analog Standards | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM |
| Control Interface | 2-wire I2C-compatible | 2-wire I2C-compatible | 2-wire I2C-compatible | 2-wire I2C-compatible | 2-wire I2C-compatible | 2-wire I2C-compatible |
Wichtigste Unterscheidungsmerkmale
- Established ADV7281 decoder configuration for legacy analog video systems (vs. ADV7281WBCPZ-M-RL)
- Complete multiformat conversion in one interface IC (vs. ADV7281WBCPZ-MA)
- Direct digital output for downstream programmable logic (vs. ADV7281A)
Designhinweise
Route the differential analog inputs as a compact, matched pair and keep them away from switching nodes, high-current return paths, and the digital output bus. Reference the pair to the device’s analog ground and use the input-network values shown in the Analog Devices ADV7281 datasheet. Changes to source impedance or termination can affect signal amplitude and synchronization, particularly when the source uses long shielded cable. Validate the complete connector-to-decoder path for ringing and common-mode excursions rather than evaluating only the decoder pins.
Treat the exposed pad as both a thermal feature and a required PCB connection. Follow the Analog Devices package and land-pattern dimensions, place the recommended thermal-via array inside the exposed-pad footprint, and provide uninterrupted ground copper beneath the package. Avoid placing a keepout or split that isolates the pad from the ground plane. The thermal requirement is especially important in compact video modules where the decoder is surrounded by switching regulators and display-processing circuitry with limited ambient airflow.
Preserve the relationship between the P0 through P7 outputs and the line-locked clock when routing them into FPGA or processor inputs. Match output timing to the receiving device’s input requirements and account for board skew across the parallel bus. Do not substitute a general-purpose clock for LLC unless the system design explicitly derives and validates it from the decoder. For long routes, use controlled-impedance topology and receiver timing margins appropriate to the clock rate; otherwise constrain the bus to the shorter PCB distances typical of a compact capture module.
Do not treat a shared package name as proof that every ADV7281 suffix has identical behavior. Confirm the analog input mapping, diagnostic-pin implementation, IDENT code, supported video modes, register set, reset behavior, and supply timing in the exact variant datasheet. The ADV7281A family member has an updated IDENT code relative to ADV7281-M, so software that identifies the decoder can react differently even when the physical footprint remains usable.
Separate the analog and digital supply paths as directed by the manufacturer, and place the required bypass capacitors close to their associated pins. Do not infer the allowable voltage range or capacitor values from generic ADV7281 family descriptions; verify them in the electrical-characteristics and application-information sections. Establish power-up and power-down sequencing for every rail, especially when the digital receiver is an FPGA. Keep regulator switching noise out of the analog input return path to preserve image stability and minimize decoding errors.
Compliance-Informationen
The retrieved information identifies the package and decoder functions but does not provide definitive compliance declarations for the exact ordering code. One third-party component listing associates the family with AEC-Q100 screening, but this is insufficient for an exact-code compliance determination.