AK5406XQ - 80MSPS Triple Display ADC | AKM Semiconductor
Teilenummer: AK5406XQ ✗ AbgekündigtAK5406XQ Übersicht
An ADC is a data-conversion IC that converts an analog voltage into a digital code. A triple ADC provides three conversion channels on one integrated circuit, while an 80MSPS sampling rate permits 80 million samples per second per channel. In a display system, this capability can support timed acquisition of multiple video-related signals, provided that the source impedance, clocking, input range, and interface requirements satisfy the device’s electrical conditions.
The AK5406XQ’s principal documented characteristics are its three-channel ADC architecture, 80MSPS operating rate, and 80LQFP package. These specifications place the component in the data-acquisition IC category, where converters bridge analog signal sources and digital processing systems. The broad category hierarchy is ADC → data converter → integrated circuit → semiconductor, and the part’s channel count supports designs requiring parallel analog measurements.
The integrated three-channel arrangement reduces the number of separate converter packages required when several display signals must be sampled together. It also centralizes clock and data routing around one device. As a result, the AK5406XQ is appropriate for display-oriented capture, timing-sensitive analog measurement, and multi-channel signal acquisition where the system architecture requires synchronized converters.
Typical application areas include LCD or plasma display interface circuitry, panel test and characterization equipment, video timing measurement, industrial imaging, and embedded display control systems. The appropriate ADC choice depends on the analog input range, output coding, clock requirements, power configuration, and digital interface. Those detailed operating conditions should be confirmed in the manufacturer datasheet before schematic capture or production release.
A key design practice is to treat converter layout as a high-speed analog signal path. Keep analog input and clock routing short, use a stable reference and clean supply connections, and follow the manufacturer’s recommended bypass and grounding arrangement. Confirm the complete pin assignment, exposed-pad requirements, and PCB land pattern for the exact 80LQFP ordering code before layout release.
This product page consolidates the identifiable AK5406XQ architecture, package information, lifecycle indication, sourcing context, and engineering-use guidance into one reference. It also distinguishes the confirmed device identity from unavailable detailed electrical and pin-level information, helping engineers plan verification work before committing a new display-processing board to production.
Drop-in-Alternativen für AK5406XQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernAK5406XQ Grenzwerte & elektrische Eigenschaften
| Device Type | Triple analog-to-digital converter |
| ADC Architecture | 3 conversion channels |
| Abtastrate | 80MSPS |
| Application | Display data acquisition |
| Manufacturer | Asahi Kasei Microdevices/AKM |
| Product Series | AK5406 |
| Gehäuse | 80LQFP |
| Package Pin Count | 80 pins |
| Montageart | Surface mount |
| Shipping Package | Tray |
| Component Classification | Data conversion IC |
| Supply Status | Mass-produced |
| Lifecycle Indication | Obsolete |
| Abtastrate | 80 million samples per second |
AK5406XQ tray Pinbelegungsleitfaden
Pinbelegung für AK5406XQ (tray-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für AK5406XQ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
AK5406XQ ist geeignet für 6 Anwendungs: LCD Panel Test and Characterization, Display Timing Measurement, Multi-Channel Video Signal Acquisition, Industrial Imaging Interfaces, Embedded Display Control Systems, Automated Production Test Fixtures.
LCD Panel Test and Characterization
The AK5406XQ fits multi-signal LCD panel test systems that need rapid acquisition of several display-related analog conditions. Its three ADC channels operate at a nominal 80MSPS, allowing the instrument to sample three inputs on a common time base rather than deploying three independent converters. The device can support timing, level, and adjustment measurements when the analog input range, output coding, reference, and clock requirements match the selected system architecture. Use short analog paths, stable references, and synchronized clocking so acquisition results remain repeatable.
Display Timing Measurement
The AK5406XQ is appropriate for measuring timing-related display signals where three channels and an 80MSPS conversion rate provide useful temporal sampling density. A display timing instrument may compare horizontal and vertical timing quantities, capture transitions through compatible front-end circuits, or support automated panel calibration. The ADC should operate within the manufacturer’s specified input and clock limits, while the acquisition system handles triggering, timing reference, and downstream digital processing. This approach reduces converter count when several related signals must be observed on one board.
Multi-Channel Video Signal Acquisition
The AK5406XQ can serve in display and video-related signal-acquisition equipment that needs three parallel analog inputs at an 80MSPS nominal sampling rate. Potential uses include comparing related display channels or capturing signals for image and panel diagnostics. Suitability depends on the source amplitude, bandwidth, common-mode range, and required output format. The analog front end must preserve signal fidelity while presenting the converter with valid input conditions, and the digital side should be designed around the confirmed interface timing and data organization.
Industrial Imaging Interfaces
The AK5406XQ may be used in industrial imaging and inspection equipment where multiple display or preview signals require simultaneous acquisition. The three-channel architecture can consolidate conversions in compact instrumentation, while 80MSPS supports dense temporal sampling for diagnostics and alignment workflows. Care is required because industrial imaging systems often include long analog runs, unusual source impedances, and strict calibration expectations. Verify input settling, reference accuracy, clock jitter tolerance, and output synchronization against the manufacturer’s electrical characteristics before production integration.
Embedded Display Control Systems
The AK5406XQ is useful in embedded display-control equipment that must acquire several analog panel conditions while managing system timing and diagnostics. Combining three 80MSPS converters in one 80LQFP package can reduce the number of separate data-acquisition components, although the relatively large package requires adequate PCB area and careful fanout. The controller should receive data over the confirmed digital interface, while separate analog conditioning protects each input. System firmware can use the acquired channels for status monitoring, calibration, or fault detection.
Automated Production Test Fixtures
The AK5406XQ can support automated production fixtures that inspect several display-related signals during panel assembly or final test. The three-channel, 80MSPS device allows several measurements to be captured in a common acquisition frame, improving fixture consistency and reducing duplicated converter hardware. Production use should define calibration procedures, acceptable limits, channel sequencing, and data-retention requirements. Because the component carries an obsolete indication, procurement should also include lot traceability, condition confirmation, and continuity planning for maintenance of deployed fixtures.
Technische Referenzdaten für AK5406XQ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Brand | Asahi Kasei Microdevices/AKM |
| Package | 80LQFP |
| ADC Channels | 3 |
| Sampling Rate | 80MSPS |
| Application | Display data acquisition |
| Shipping Package | Tray |
| Lifecycle Status | Obsolete |
| Component Type | Triple ADC data-conversion IC |
Wichtigste Unterscheidungsmerkmale
- Three parallel conversion channels in one package (vs. Single-channel ADC alternatives)
- Display-oriented high-speed conversion (vs. General-purpose display ADC alternatives)
- Consolidated surface-mount implementation (vs. Three discrete converter packages)
Designhinweise
Use the exact AK5406 manufacturer mechanical drawing to create the 80LQFP land pattern and confirm pin 1 orientation before routing. Keep analog input traces short, place associated bypass capacitors near their supply pins, and avoid routing high-speed digital return currents through the analog reference area. Because this is an 80-lead converter, allocate the required routing escape channels early; late changes can make clean fanout and grounding difficult.
Treat the three analog inputs and sampling clock as a coordinated high-speed signal path. Use a low-impedance, stable clock source with symmetric routing, and keep clock and sensitive analog traces away from noisy switching nodes. Confirm the converter’s clock-jitter tolerance and input-settling requirements in the manufacturer datasheet. Source impedance and termination must be calculated for the operating frequency rather than copied from a generic ADC reference design.
Separate analog and digital supply paths as recommended by the device documentation, placing local high-frequency bypass capacitance at the relevant supply pins. Use a low-noise reference with short return routing and adequate decoupling. Before layout release, obtain the exact supply-voltage, reference-voltage, power-consumption, and sequencing limits from the AK5406 datasheet; these electrical conditions cannot be safely inferred from the 80MSPS headline specification.
Do not interpret 80MSPS as a guaranteed analog input bandwidth, and do not treat a family member with a different suffix as an automatic substitute. The observed obsolete designation also requires controlled procurement: request lot traceability, operating-condition confirmation, and packaging details before building. If a replacement is evaluated, verify the complete pinout, input range, output coding, clocking scheme, supply levels, and digital timing rather than comparing sampling rate alone.
Compliance-Informationen
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the AK5406XQ. AEC-Q100 qualification is not applicable to this display ADC based on the available product classification.