AKM (Asahi Kasei Microdevices)

AK7831BB - 12W Mono Class-D Audio Amplifier | AKM

Teilenummer: AK7831BB ✓ Aktiv
12-ball WLCSP Package
MOQ: 1 |

AK7831BB Übersicht

The Asahi Kasei Microdevices AK7831BB is a mono Class-D audio amplifier IC rated for 12 W output and supplied in a compact 12-ball WLCSP package. It is designed for audio systems that require efficient amplification from a single output channel, combining a small board footprint with the power capability needed for compact speakers. The AK7831BB is identified by AKM as a mass-produced integrated circuit and is offered in tape-and-reel packaging.

A Class-D audio amplifier is a switching power amplifier that converts a PWM-based audio signal into a high-current speaker output. Compared with a linear output stage, the Class-D architecture generally improves power efficiency by reducing the amount of time that the output transistors spend conducting, which is particularly valuable in portable and space-constrained products. The part is positioned within the hierarchy of audio amplifiers, amplifier ICs, integrated circuits, and semiconductors.

The AK7831BB's principal confirmed characteristics are its mono configuration, Class-D output type, 12 W output rating, and 12-ball WLCSP package. Its surface-mount form factor supports compact PCB layouts, while the small package places greater emphasis on careful land-pattern design, thermal management, and clean power routing. A designer should obtain the manufacturer datasheet and confirm voltage limits, output configuration, thermal limits, and application requirements before releasing a production layout.

Typical uses include portable speakers, compact consumer audio products, soundbar or monitor-speaker designs, and other single-channel audio systems that fit the device's 12 W output class. The amplifier may be paired with a host processor, audio codec, DAC, or digital-to-analog interface when the system architecture requires digital audio sources. Digital filtering and volume-control functions can remain upstream when they are better suited to an audio codec or system-on-chip.

PCB layout is a central design consideration for this device. Place the input, output, ground, bypass-capacitor, and power-connection areas according to the manufacturer reference layout, and keep switching-current paths compact. Account for the package's thermal limitations at maximum continuous output and provide suitable copper area for heat spreading. Verify EMI behavior because the Class-D output stage can introduce high-frequency switching energy into nearby analog and radio-sensitive circuitry.

This page consolidates the confirmed product identity, package information, sourcing guidance, comparison context, and application-focused design guidance. It also identifies the technical parameters that must be checked against the manufacturer datasheet before schematic release, PCB implementation, or production sourcing.

Drop-in-Alternativen für AK7831BB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

AK7831BB Grenzwerte & elektrische Eigenschaften

Product Type Mono Class-D audio amplifier IC
Ausgangskonfiguration 1 channel (mono)
Rated Output Power 12 W
Amplifier Topology Class-D
Gehäuse 12-ball WLCSP
Montageart Surface mount
Manufacturer Packaging Tape & reel
Production Status Mass-produced

AK7831BB 12-ball wlcsp Pinbelegungsleitfaden

Pinbelegung für AK7831BB (12-ball wlcsp-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AK7831BB im 12-ball wlcsp-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AK7831BB.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AK7831BB ist geeignet für 6 Anwendungs: Portable Bluetooth Speaker, Compact Consumer Audio Product, Soundbar Speaker Channel, Display Audio Monitor, Industrial Annunciator, Smart-home Audio Node.

📱

Portable Bluetooth Speaker

The AK7831BB fits a compact mono speaker platform that requires up to a 12 W Class-D output stage in a small 12-ball WLCSP footprint. It can receive an analog audio signal from a Bluetooth audio codec or system-on-chip and drive a single speaker efficiently. The compact package reduces PCB-area demand, while Class-D operation helps limit heat. Before release, verify battery-rail compatibility, sustained output at the selected speaker impedance, thermal rise, and charger-related noise using the AK7831BB datasheet.

🎧

Compact Consumer Audio Product

AK7831BB is appropriate for a compact consumer-audio product with one amplified channel, such as a tabletop speaker, alarm unit, or personal audio accessory. Its 12 W rating provides a useful headline power class, and the 12-ball WLCSP package supports dense PCB layouts. The design can place digital volume control and filtering in an upstream codec or processor while the AK7831BB handles analog power amplification. Validate idle noise, THD+N, start-up behavior, and thermal performance across the intended input level and supply range.

📺

Soundbar Speaker Channel

The AK7831BB can serve as the power-amplifier stage for a single soundbar speaker channel when that channel is designed for a 12 W-class mono output. A digital audio processor can supply the decoded signal while the AK7831BB drives the speaker through the application network shown in the manufacturer documentation. Because Class-D outputs carry switching energy, place output routing away from microphones, sensor inputs, and low-level analog stages. Confirm thermal behavior with the real speaker network and enclosure because crossover components can affect amplifier loading.

📺

Display Audio Monitor

The AK7831BB is suitable for a compact monitor or television audio channel where one speaker is driven from a decoded analog audio line. The 12 W Class-D output capability aligns with small display speakers, and the WLCSP package avoids the larger footprint of a conventional leaded audio amplifier. Keep the amplifier supply and ground return isolated from sensitive display or interface circuitry where practical. Test for audible artifacts, channel imbalance, thermal rise at maximum sustained volume, and EMI compliance in the complete display assembly.

🏭

Industrial Annunciator

The AK7831BB can amplify a mono voice or alert signal in an industrial annunciator when the enclosure, speaker, and power budget fit a 12 W output device. An industrial controller or codec can provide the alert audio, while the Class-D stage drives the transducer through the manufacturer-recommended network. This application benefits from efficient amplification in a confined enclosure, but continuous alerting duty requires careful thermal review. Confirm supply tolerances, protection behavior, and audible output over the intended ambient-temperature range before deployment.

🧩

Smart-home Audio Node

AK7831BB can act as the output stage in a smart-home audio node that receives a line-level signal from a codec, voice processor, or network-connected controller. The mono Class-D architecture and 12-ball WLCSP package support compact enclosure designs, while 12 W output allows a reasonably capable speaker. The amplifier should be placed after digital volume and source-selection functions unless those functions are implemented elsewhere. Validate startup sequencing, pop suppression, EMI coupling into wireless circuitry, and worst-case thermal performance.

What type of amplifier is the AK7831BB?
The AK7831BB is a mono Class-D audio amplifier IC with a 12 W output rating in a 12-ball WLCSP package. According to the AKM manufacturer listing, it is supplied in tape-and-reel packaging and is classified as an amplifier IC. Its Class-D topology is intended for efficient single-channel audio amplification, particularly where compact PCB area and low circuit-board heat are priorities.
How much output power can AK7831BB deliver?
AK7831BB is identified as a 12 W mono Class-D amplifier. The 12 W figure describes the device's headline output capability; the usable result also depends on supply voltage, speaker impedance, cooling, PCB copper area, and signal quality. Use the manufacturer datasheet's power-output curves and thermal limits when defining the operating point for a specific speaker and enclosure.
What package does AK7831BB use?
AK7831BB is packaged in a compact 12-ball WLCSP for surface-mounted assembly. The AKM listing identifies the package as 12WLCSP and the orderable AK7831BB configuration as tape-and-reel. Because WLCSP layouts are compact, use the manufacturer's land pattern and place input, bypass, output, and ground connections according to the datasheet reference layout.
Where can I download the AK7831BB datasheet?
The official AKM product page for AK7831BB is available at https://www.akm-semi.com/AK7831BB/1096849 and is the appropriate starting point for the manufacturer technical documentation. Use the AK7831BB-specific datasheet to confirm the exact electrical limits, pin definitions, recommended application circuit, exposed-pad requirements, and test conditions before finalizing the design.
Where is the AK7831BB pinout located?
The AK7831BB pinout is documented in the manufacturer datasheet under the package-pin and application information sections. The part uses a 12-ball WLCSP, so the ball assignments and exposed-pad treatment must be taken from the AK7831BB-specific document rather than inferred from a generic BGA or QFN diagram. The manufacturer page is available at https://www.akm-semi.com/AK7831BB/1096849.
Is the AK7831BB suitable for portable speakers?
The AK7831BB is suitable for a compact portable speaker when its supply voltage, 12 W output rating, thermal behavior, and 12-ball WLCSP layout meet the product requirements. Class-D operation supports efficient amplification, while the small package helps reduce board area. Validate low-battery operation, thermal rise, acoustic output, and enclosure-driven heat before production release.
Can the AK7831BB drive an 8-ohm speaker?
The AK7831BB may drive an 8-ohm speaker only if the manufacturer power and thermal data confirm that operating condition. Its stated output class is 12 W, but the allowable continuous output also depends on supply voltage, PCB thermal resistance, and signal level. The AK7831BB datasheet must be consulted for the supported load impedance and corresponding output power.
What is the difference between Class-D and linear audio amplification?
Class-D amplification uses switching transistors to convert a PWM-derived signal into speaker current, whereas a linear amplifier continuously conducts through its output stage. Class-D designs commonly achieve higher efficiency and lower heat dissipation than comparable linear stages. The AK7831BB is a 12 W mono Class-D amplifier in a compact WLCSP package, making thermal design and EMI control essential.
What is the best drop-in replacement for AK7831BB?
No independently verified, pin-to-pin drop-in replacement for the AK7831BB is identified in the available cross-reference results. A replacement should be accepted only when its manufacturer confirms the same 12-ball WLCSP land pattern, pin functions, supply range, output topology, load support, thermal limits, and acoustic performance. Request a quote for the original exact MPN when continuity is required.
Are there equivalent AK7831-series parts for AK7831BB?
The AK7831, AK7831B, and AK7831BB names appear in product listings, but the available listings do not establish that each ordering code has an identical land pattern and electrical configuration. A suffix or packaging-code relationship is not sufficient evidence of drop-in compatibility. Confirm the ordering-code table and AK7831BB datasheet with AKM before substituting one of these names.
What can replace the AK7831BB in a portable audio design?
A replacement for the AK7831BB should match its mono Class-D function, 12-ball WLCSP footprint, pin functions, supply-voltage range, speaker-load capability, and thermal limits. The available cross-reference listings identify search tools but do not provide a confirmed substitute, so no alternative is represented as a drop-in replacement. Use the Request a Quote form on this page to source the exact ordered part.
AK7831BB versus a generic Class-D amplifier: which should be selected?
Select the AK7831BB when its documented 12 W mono output, 12-ball WLCSP package, supply limits, and protection functions match the design. A generic Class-D amplifier is preferable only when it offers verified pin compatibility or a clearly better electrical fit. The key comparison points are footprint, output power at the intended load, efficiency, THD+N, EMI behavior, and thermal performance.
When should I choose the AK7831BB over another mono audio amplifier?
Choose the AK7831BB when a compact 12-ball WLCSP solution with a stated 12 W mono Class-D output is appropriate and the required operating conditions are supported by the manufacturer documentation. Select another device instead if it offers a verified drop-in footprint, higher efficiency, lower distortion, integrated codec functions, wider supply range, or stronger protection at the intended power level.
Is the AK7831BB in stock and what is its lead time?
Current stock and a firm lead time should be requested through the Request a Quote form on this page. The available manufacturer listing identifies AK7831BB as a mass-produced component, but that statement alone does not establish current inventory, lot availability, or a delivery commitment. Supply status can vary by order quantity, package configuration, and manufacturing schedule.
What is the current price of AK7831BB?
The current unit price and volume-break structure for AK7831BB should be obtained through the Request a Quote form on this page. The available product pages identify the exact MPN and package but do not present qualifying quantity-break pricing that can be copied accurately. Request the required quantity, package format, and target delivery schedule with your quote request.
How should an AK7831BB PCB layout be designed?
The AK7831BB PCB layout should follow the manufacturer reference layout exactly, including the 12-ball WLCSP land pattern, bypass locations, output routing, ground return, and exposed-pad handling. Keep the Class-D switching loop compact and separate sensitive input or radio circuitry from output-current paths. Confirm thermal and EMI performance in the final enclosure and PCB stack-up.

Technische Referenzdaten für AK7831BB – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AK7831BB for a compact, single-channel audio design when a 12 W Class-D output stage and 12-ball WLCSP footprint are suitable. It is particularly attractive for portable speakers, compact consumer products, soundbar channels, and smart-home audio nodes where board area and efficiency matter. Select another amplifier instead when you need a verified drop-in replacement, more than one integrated output channel, a different supply range, lower distortion, stronger protection, or better thermal performance than this package provides. Treat the AK7831, AK7831B, and AK7831BB ordering-code relationship cautiously: names appearing together in listings do not by themselves prove identical pinout or electrical compatibility. For production continuity, use the exact AK7831BB order code and validate every operating limit against the manufacturer datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Asahi Kasei Microdevices
Package 12-ball WLCSP
Product Type Mono Class-D audio amplifier IC
Output Configuration 1 channel (mono)
Rated Output Power 12 W
Mounting Type Surface mount
Manufacturer Packaging Tape & Reel
Production Status Mass-produced

Wichtigste Unterscheidungsmerkmale

  • Compact high-output mono amplification (vs. Generic larger-package Class-D amplifier)
  • Single-channel Class-D output stage (vs. Multi-channel audio amplifier)
  • Orderable tape-and-reel configuration (vs. Loose or non-reeled supply configuration)

Designhinweise

Use the AK7831BB manufacturer land pattern without substituting a generic WLCSP layout. Place input, bypass, output, and ground components according to the reference application circuit, and keep the Class-D switching-current loop as small as practical. The 12-ball WLCSP has little room for routing variation, so complete footprint, paste, mask, exposed-pad, and solder-process checks before releasing artwork.

Estimated: determine worst-case dissipation from the actual rail voltage, output power, and amplifier efficiency, then compare the resulting junction-temperature estimate with the package and PCB limits. For example, if the amplifier dissipates 1.5 W and the effective junction-to-ambient thermal resistance is 40 degC/W, the estimated rise is 60 degC. Confirm efficiency and thermal resistance with the manufacturer data before relying on this calculation.

Route the Class-D speaker output away from microphone, sensor, radio, and low-level analog inputs. Use a short ground return and follow the manufacturer filtering recommendations at the supply pins and output. Perform conducted and radiated emissions testing in the final enclosure because PCB parasitics, speaker cables, power converters, and accessory cables can dominate system-level EMI performance.

Do not infer supply limits, pin functions, output topology, speaker impedance, or thermal ratings from the AK7831BB order code. Those details must be taken from the AK7831BB manufacturer datasheet and its ordering-information table. Also verify that any AK7831 or AK7831B ordering code has identical electrical and package requirements before treating it as a substitution.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product listing identifies AK7831BB as mass-produced and available in tape-and-reel packaging. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification claims are not stated in the available product information.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AK7831BB datasheet AK7831BB pinout AK7831BB datasheet pdf AK7831BB 12W amplifier AK7831BB WLCSP package AK7831BB mono Class-D amplifier AK7831BB equivalent AK7831BB replacement AK7831BB cross reference AK7831BB schematic AK7831BB price AK7831BB stock

Verwandte Bauteile & Begriffe

Asahi Kasei Microdevices AKM Semiconductor AK7831BB AK7831 AK7831B Class-D amplifier mono audio amplifier audio amplifier IC integrated circuit semiconductor 12 W output power 12-ball WLCSP surface mount tape and reel PWM audio modulation speaker load impedance THD+N signal-to-noise ratio Class-D switching EMI thermal management portable speaker consumer audio soundbar speaker channel smart-home audio node
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen