Microchip Technology

AT91SAM7S32-MU - 55MHz 32KB ARM7 MCU | Microchip

Teilenummer: AT91SAM7S32-MU ✓ Aktiv
48-QFN, 7 x 7 mm Package 55 MHz Speed 32 KB Memory
MOQ: 1 |

AT91SAM7S32-MU Übersicht

The Microchip Technology AT91SAM7S32-MU is a 55 MHz, 32-bit ARM7-based flash microcontroller with 32 KB of internal flash, 8 KB of SRAM, and a 48-QFN 7 x 7 mm package. It belongs to the low-pin-count SAM7S family and combines an ARM7TDMI RISC core with integrated memory, serial interfaces, timers, and embedded debug support.

A flash microcontroller is a compact embedded-computing device that executes its application program directly from internal nonvolatile memory. The SAM7S series occupies the low-pin-count microcontroller segment of the broader embedded processor and semiconductor hierarchy. Its mix of fast execution, integrated flash, SRAM, and peripheral interfaces makes it suitable for compact control systems that require more capability than a basic 8-bit or 16-bit controller.

Three defining parameters are the 55 MHz maximum operating frequency, 32 KB of flash program memory, and 8 KB of SRAM. The device also supports 16-bit Thumb-based instruction processing within its 32-bit ARM architecture. Embedded ICE and Debug Communication Channel support provide a path for in-circuit debugging, while the manufacturer product page identifies the AT91SAM7S32 as part of the flash-based SAM7S series.

The SAM7S32 architecture is intended for embedded control rather than high-volume data processing. Its ARM7TDMI processor executes from on-chip flash and uses SRAM for working data and stack storage. Peripheral integration reduces the number of external devices required in compact industrial, communications, and control products, although the exact peripheral mix and pin-level electrical limits should be confirmed in the manufacturer datasheet before layout or firmware development.

Typical uses include industrial automation modules, serial gateways, embedded data-collection equipment, access-control units, and compact motor or instrument controllers. In these systems, the 55 MHz core supports responsive control logic while the integrated 32 KB flash stores application firmware. The 48-QFN package reduces board area, but its fine pitch requires careful PCB layout and inspection.

When designing around the AT91SAM7S32-MU, check every power, ground, reset, clock, and debug connection against the manufacturer pin description before fabrication. Decoupling should follow the recommended capacitor values and placement in the datasheet. Firmware planning should also account for the limited 8 KB SRAM and use of the Debug Communication Channel or supported debug adapter.

This product record consolidates the manufacturer's core specifications, exact package information, practical implementation guidance, and verified sourcing data. It also distinguishes true same-package alternatives from broader ARM microcontroller options, helping engineers assess replacement decisions without changing the PCB footprint.

Drop-in-Alternativen für AT91SAM7S32-MU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AT91SAM7S32-MU (gleiche Bauform und Footprint) – abweichend in Flash Organization, Internal Flash Memory, Internal SRAM, Package, Processor Core.

Microchip Technology
Flash Organization: 512 pages
Internal Flash Memory: 64 KB
Internal SRAM: 16 KB
Vergleichen mit AT91SAM7S32-MU →

AT91SAM7S32B-MU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-QFN, 7 x 7 mm
Same SAM7S32 core, 55 MHz rating, 32 KB flash, and 8 KB SRAM; revision differs while key ratings match 100%.

📋 Referenzalternative (nicht im Katalog)

AT91SAM7S32B-AU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-QFN, 7 x 7 mm
Same SAM7S32 core, 55 MHz rating, 32 KB flash, and 8 KB SRAM; ordering-temperature code differs while key ratings match 100%.

📋 Referenzalternative (nicht im Katalog)

AT91SAM7S32C-MU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-QFN, 7 x 7 mm
Same SAM7S32 memory configuration and 55 MHz core class; device revision differs while key ratings match 100%.

📋 Referenzalternative (nicht im Katalog)

AT91SAM7S32C-AU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-QFN, 7 x 7 mm
Same SAM7S32 memory configuration and 55 MHz core class; revision and ordering-temperature code differ while key ratings match 100%.

📋 Referenzalternative (nicht im Katalog)

AT91SAM7S64-MU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 48-QFN, 7 x 7 mm
32-bit ARM RISC flash microcontroller · ARM7TDMI · 55 MHz · 32-bit ARM with 16-bit Thumb instruction set · 64 KB · 512 pages · 16 KB · Integrated USB device port

Preis auf Anfrage

Datenblatt ansehen →

AT91SAM7S32-MU Grenzwerte & elektrische Eigenschaften

Product Type Flash Microcontroller
Processor Core ARM7TDMI RISC
Architecture 32-bit ARM with 16-bit Thumb instruction set
Maximum CPU Frequency 55 MHz
Internal Flash Memory 32 KB
Internal SRAM 8 KB
Flash Organization 32 KB (32K x 8)
Gehäuse 48-QFN, 7 x 7 mm
Pin-Anzahl 48 pins
Montageart Surface Mount
Temperature Grade Industrial
Embedded Debug Embedded ICE and Debug Communication Channel
Series SAM7S
Core Orientation Low-pin-count RISC microcontroller
Program Memory Type Internal Flash
Data Memory 8 KB internal SRAM

AT91SAM7S32-MU 48-qfn, 7 x 7 mm Pinbelegungsleitfaden

Pinbelegung für AT91SAM7S32-MU (48-qfn, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für AT91SAM7S32-MU im 48-qfn, 7 x 7 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AT91SAM7S32-MU.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AT91SAM7S32-MU ist geeignet für 6 Anwendungs: Industrial Automation Controller, Serial Communication Gateway, Data Acquisition Module, Access Control Unit, Embedded Instrument Controller, Motor and Process Control Module.

🏭

Industrial Automation Controller

The AT91SAM7S32-MU fits compact industrial automation controllers that coordinate sensors, digital I/O, communications, and deterministic control logic. Its 55 MHz ARM7TDMI core provides more processing headroom than a small 8-bit controller, while 32 KB of flash stores application code and 8 KB of SRAM supports working data. The 48-QFN package also limits board area in distributed control modules. The key engineering trade-off is constrained SRAM, so the firmware should use bounded buffers and avoid copying large protocol frames into multiple memory locations.

🌐

Serial Communication Gateway

The AT91SAM7S32-MU can act as the central processor in a small serial gateway that converts data between embedded equipment and a host network. Its 55 MHz ARM7TDMI core can handle protocol processing, framing, and supervisory logic, while the integrated flash stores protocol handlers and configuration logic. At 32 KB flash and 8 KB SRAM, it is best suited to gateways with bounded buffering rather than high-throughput packet aggregation. Firmware should define memory budgets early and preserve space for stack growth during interrupts and network processing.

🧩

Data Acquisition Module

The AT91SAM7S32-MU is suitable for a compact data-acquisition module that samples sensors, performs local filtering, and transfers results over a serial interface. The 55 MHz processor provides useful arithmetic throughput for calibration and digital filtering, and 32 KB flash is sufficient for compact embedded applications with modest code. Its 8 KB SRAM limits simultaneous sample storage, so designers should use streaming buffers, fixed-point processing, and interrupt-driven conversion. The 48-QFN land pattern supports compact instrument designs but requires disciplined thermal-pad and routing practices.

🔒

Access Control Unit

The AT91SAM7S32-MU can implement a compact access-control unit that manages credential input, lock or relay decisions, event logging, and host communication. Its 55 MHz ARM7 core provides ample control headroom, and 32 KB flash accommodates credential handling and communication firmware for a low-to-medium-complexity design. The 8 KB SRAM is adequate when records are transmitted rather than accumulated in large local databases. Designers should test power-loss behavior, debounce timing, security-sensitive firmware updates, and startup-state requirements before production release.

🔧

Embedded Instrument Controller

The AT91SAM7S32-MU works as the control processor in a compact laboratory or field instrument that manages measurements, calibration tables, displays, and operator commands. The 55 MHz ARM7TDMI processor manages control loops and communication tasks, while 32 KB flash stores application firmware and calibration logic. Because SRAM is limited to 8 KB, instrument designs should avoid large sample buffers and move completed records to external nonvolatile storage. Stable timing and low-latency control depend on correct clock configuration and disciplined interrupt servicing.

⚡

Motor and Process Control Module

The AT91SAM7S32-MU can serve in a compact motor or process-control module where a fast CPU executes control algorithms and coordinates input sampling, outputs, and diagnostics. Its 55 MHz ARM7TDMI core provides deterministic control capability, and 32 KB flash stores the control application without requiring an external program-memory device. The 8 KB SRAM is adequate for bounded state variables but not large motion histories. Designers should separate timing-critical tasks, verify watchdog behavior, and account for regulator headroom and output-driver requirements outside the MCU.

Zusammenfassung der empfohlenen Produkte

AT91SAM7S32B-MU Same-family control MCU Verwendet in: Industrial Automation Controller, Embedded Instrument Controller ATSAM3S4AA-MU Microchip Technology Verwendet in: Industrial Automation Controller, Motor and Process Control Module AT91SAM7S32C-MU Same-family gateway controller Verwendet in: Serial Communication Gateway, Motor and Process Control Module AT91SAM7S64-MU Microchip Technology Verwendet in: Serial Communication Gateway, Data Acquisition Module, Embedded Instrument Controller AT91SAM7S32B-AU Same-family acquisition controller Verwendet in: Data Acquisition Module AT91SAM7S32C-AU Same-family access controller Verwendet in: Access Control Unit ATSAM3S2AA-AU Microchip Technology Verwendet in: Access Control Unit
What is the AT91SAM7S32-MU?
The AT91SAM7S32-MU is a 55 MHz ARM7TDMI flash microcontroller from Microchip Technology with 32 KB of internal flash, 8 KB of SRAM, and a 48-QFN 7 x 7 mm package. According to the Microchip AT91SAM7S32 product page, it is a member of the SAM7S series and supports 16-bit Thumb instructions alongside its 32-bit ARM architecture. It is designed for compact embedded-control, communications, and industrial equipment requiring integrated program and data memory.
What are the key specifications of AT91SAM7S32-MU that engineers should know?
The AT91SAM7S32-MU combines a 55 MHz ARM7TDMI core, 32 KB of internal flash, 8 KB of SRAM, and a 48-QFN 7 x 7 mm package. The Microchip product page identifies the processor as a 32-bit RISC implementation with 16-bit Thumb instruction support. Embedded ICE and Debug Communication Channel support are also listed for the SAM7S family, providing integrated debugging functions without requiring a separate large peripheral set.
What is the operating frequency of AT91SAM7S32-MU?
The AT91SAM7S32-MU operates at a maximum frequency of 55 MHz. According to the Microchip AT91SAM7S32 product page, this speed is provided by the device's ARM7TDMI RISC processor. The operating clock must remain within the limits and configuration conditions defined by the manufacturer datasheet, particularly when using an external oscillator or an internal clock source.
How much flash and SRAM does AT91SAM7S32-MU have?
The AT91SAM7S32-MU provides 32 KB of internal flash and 8 KB of internal SRAM. The Microchip product page identifies 32 KB of flash for program storage and 8 KB of SRAM for working data. Firmware designers should budget stack and dynamic memory carefully because the 8 KB SRAM also supports the active execution context and interrupt servicing.
What package does AT91SAM7S32-MU use?
The AT91SAM7S32-MU uses a 48-QFN surface-mount package measuring 7 x 7 mm. The DigiKey listing for the exact MPN identifies the 48-QFN 7 x 7 mm package, while the industrial temperature designation is reflected in the MU ordering code. Because the land pattern and exposed thermal-pad arrangement determine PCB compatibility, engineers should use the manufacturer package drawing rather than infer dimensions from a generic QFN outline.
Where can I download the AT91SAM7S32-MU datasheet?
The official AT91SAM7S32 datasheet is available through the Microchip product page at https://www.microchip.com/en-us/product/AT91SAM7S32. Use the manufacturer document associated with that page for the authoritative pin description, electrical characteristics, clock requirements, package drawing, and peripheral register map. Third-party document mirrors can assist discovery, but the Microchip document should control engineering decisions and PCB implementation.
Where is the AT91SAM7S32-MU pinout located?
The AT91SAM7S32-MU pinout is found in the pin-description table and package drawing of the official Microchip AT91SAM7S32 datasheet. The device has 48 QFN terminals, so every land, power pin, ground connection, and exposed-pad connection should be assigned directly from that table. Use the manufacturer pin-description table when assigning PCB tracks, and preserve the documented exposed-pad connection.
Can AT91SAM7S16-MU replace AT91SAM7S32-MU?
The AT91SAM7S16-MU is a same-package SAM7S-family candidate, but its flash capacity is only 16 KB versus 32 KB in the AT91SAM7S32-MU, a 50% reduction. It is therefore unsuitable as a drop-in replacement when the existing firmware requires more than 16 KB. Engineers should consider it only after confirming the memory requirement and verifying the complete pin configuration against the manufacturer documentation.
What can replace AT91SAM7S32-MU without changing the 48-QFN footprint?
A replacement must first preserve the 48-QFN 7 x 7 mm land pattern, core and peripheral compatibility, memory organization, clock requirements, and voltage limits. Same-family AT91SAM7S devices can provide the closest starting point, but a different ARM Cortex-M model may change interrupt behavior, peripherals, and firmware support. Treat a footprint match alone as insufficient evidence of drop-in compatibility, and validate the replacement electrically and with representative firmware.
When should I choose AT91SAM7S32-MU over a Cortex-M alternative?
Choose the AT91SAM7S32-MU when an existing design depends on its ARM7TDMI architecture, 32 KB flash configuration, 8 KB SRAM, and established SAM7S software support. A Cortex-M alternative may provide a different instruction set, interrupt architecture, peripheral arrangement, and development-tool ecosystem. Prefer a same-family replacement for maintenance when footprint compatibility is essential; consider a Cortex-M redesign only when new features justify firmware and hardware verification.
Is AT91SAM7S32-MU suitable for industrial control applications?
The AT91SAM7S32-MU is suitable for compact industrial control applications that fit its 55 MHz processing speed, 32 KB flash, 8 KB SRAM, and integrated peripheral set. The part is listed with an industrial temperature grade, making it appropriate for many industrial environments. Final suitability still depends on the required temperature limits, isolation, EMC performance, long-term availability, and peripheral coverage for the specific machine or process-control function.
How much power does the AT91SAM7S32-MU consume?
Operating-current consumption depends on CPU activity, clock configuration, peripheral use, supply voltage, and operating temperature. The manufacturer AT91SAM7S32 datasheet contains the electrical characteristics needed for a valid power-budget calculation. Review the maximum-current rows together with regulator headroom and thermal requirements rather than estimating consumption from processor frequency alone.
What debugging tools can be used with AT91SAM7S32-MU?
The AT91SAM7S32-MU supports Embedded ICE and Debug Communication Channel functions according to the Microchip product page. A compatible debug adapter can use the Debug Communication Channel for programming and debug communication without occupying the device's normal application pins. The supported debugger and adapter should follow the programming recommendations in the manufacturer AT91SAM7S32 documentation.
Where can I buy AT91SAM7S32-MU and request a quote?
Use the Request a Quote form on this page to request AT91SAM7S32-MU availability, lead time, and order quantity. Quote requests should state the exact 48-QFN 7 x 7 mm MPN, target quantity, required delivery date, and any temperature or inspection requirements. The form provides a direct channel for current sourcing without relying on stale catalog quantities or informal availability claims.
Is AT91SAM7S32-MU in stock and what is its lead time?
Current stock and factory lead time for AT91SAM7S32-MU should be requested through the Request a Quote form on this page. Submit the exact MPN, target quantity, delivery date, and packaging requirements so the supply response reflects the intended production build. Treat marketplace inventory messages as temporary rather than a commitment, and plan a schedule buffer for constrained legacy MCU supply chains.

Technische Referenzdaten für AT91SAM7S32-MU – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AT91SAM7S32-MU when maintaining an existing 48-QFN SAM7S design that requires 32 KB flash, 8 KB SRAM, and an ARM7TDMI execution environment. Prefer AT91SAM7S32B-MU or another same-family revision when its documented electrical limits, lifecycle status, and ordering conditions fit the application; the revision path can preserve the board and software base. Consider AT91SAM7S64-MU when the same package can support a later firmware revision needing 64 KB flash. Choose a Cortex-M device such as ATSAM3S4AA-MU only when its higher processing capability justifies changes to peripherals, startup code, interrupts, tooling, and board validation. Package similarity alone is not proof of drop-in equivalence.

Vergleich mit Alternativen

Parameter Dieses Produkt AT91SAM7S32B-MU AT91SAM7S32B-AU AT91SAM7S32C-MU AT91SAM7S32C-AU AT91SAM7S64-MU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-QFN, 7 x 7 mm 48-QFN, 7 x 7 mm 48-QFN, 7 x 7 mm 48-QFN, 7 x 7 mm 48-QFN, 7 x 7 mm 48-QFN, 7 x 7 mm
Processor Core ARM7TDMI RISC ARM7TDMI RISC ARM7TDMI RISC ARM7TDMI RISC ARM7TDMI RISC ARM7TDMI RISC
Maximum CPU Frequency 55 MHz 55 MHz 55 MHz 55 MHz 55 MHz 55 MHz
Internal Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB 64 KB
Internal SRAM 8 KB 8 KB 8 KB 8 KB 8 KB 8 KB
Instruction Set 32-bit ARM with 16-bit Thumb instructions 32-bit ARM with 16-bit Thumb instructions 32-bit ARM with 16-bit Thumb instructions 32-bit ARM with 16-bit Thumb instructions 32-bit ARM with 16-bit Thumb instructions 32-bit ARM with 16-bit Thumb instructions
Debug Support Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel
Ordering Code MU MU AU MU AU MU

Wichtigste Unterscheidungsmerkmale

  • Direct same-family footprint options (vs. AT91SAM7S32B-MU)
  • Expanded firmware option in the same footprint class (vs. AT91SAM7S64-MU)
  • Integration reduces external memory dependency (vs. ATSAM3S4AA-MU)

Designhinweise

Use the official Microchip land pattern for the 48-QFN 7 x 7 mm package and connect the exposed pad exactly as specified. Place the recommended input bypass and decoupling capacitors adjacent to their associated power pins, with short return paths. The fine-pitch perimeter pads require solder-paste control and careful inspection; avoid long thermal-pad connections that interfere with the intended copper-heat-spreading area.

Create the supply rail with regulator headroom that covers the MCU's maximum operating current plus transient demand from enabled peripherals. Establish a stable clock and correct reset behavior before enabling application peripherals. Because current consumption varies with CPU activity, peripheral state, and clock frequency, use the manufacturer's electrical-characteristics tables to size the regulator, bulk capacitance, and power-loss protection for worst-case conditions.

Do not treat a same-footprint Cortex-M controller as an automatic software-compatible replacement. The ARM7TDMI architecture and SAM7S peripheral map differ from Cortex-M devices, so startup code, interrupt vectors, register definitions, and toolchain configuration may require redesign. For maintenance, validate firmware and electrical timing on the selected same-family alternative before releasing it for production.

Plan clock, debug, and high-speed serial routes away from noisy switching nodes and long unprotected traces. Respect the Debug Communication Channel requirements so programming and debug remain functional in the assembled product. Confirm ground-return continuity under the exposed-pad layout and review the package drawing for lead pitch, courtyard, and solder-mask details before releasing artwork.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The MCU is identified as an industrial-temperature-grade microcontroller, but automotive qualification and environmental-compliance declarations are not established by the cited product information.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AT91SAM7S32-MU datasheet AT91SAM7S32-MU pinout AT91SAM7S32-MU specifications AT91SAM7S32-MU price AT91SAM7S32-MU stock Microchip AT91SAM7S32-MU AT91SAM7S32 55MHz microcontroller AT91SAM7S32 48-QFN footprint AT91SAM7S32-MU equivalent AT91SAM7S32-MU replacement AT91SAM7S32-MU vs AT91SAM7S64-MU AT91SAM7S32 debug adapter AT91SAM7S32 industrial controller AT91SAM7S32-MU schematic

Verwandte Bauteile & Begriffe

Microchip Technology AT91SAM7S32-MU AT91SAM7S32B-MU AT91SAM7S32B-AU AT91SAM7S32C-MU AT91SAM7S32C-AU AT91SAM7S64-MU ATSAM3S4AA-MU ATSAM3S2AA-AU SAM7S series ARM7TDMI ARM7 RISC processor Thumb instruction set flash microcontroller embedded microcontroller embedded processor semiconductor 32-bit microcontroller 48-QFN QFN package family surface-mount technology 32 KB flash memory 8 KB SRAM 55 MHz clock Embedded ICE Debug Communication Channel industrial control serial gateway data acquisition access control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen