ATF22V10CQ-15SC - 10 Macrocell, 15 ns EE PLD | Microchip
Teilenummer: ATF22V10CQ-15SC ✓ AktivATF22V10CQ-15SC Übersicht
An EE PLD is a semiconductor whose configurable logic functions are stored in nonvolatile memory. In the broader hierarchy, the ATF22V10CQ-15SC is a programmable logic device, a user-programmable logic semiconductor, and ultimately an integrated circuit. Unlike a fixed-function logic IC, its macrocells and configurable interconnect can implement Boolean equations, registered logic, latch-based state retention, and other control functions before the device is programmed for its final application.
The ATF22V10CQ-15SC provides 10 macrocells, 15 ns propagation delay, and a nominal 5 V operating supply. Its electrically erasable Flash architecture permits repeated configuration updates, making it useful where design revisions, production-programming changes, or field maintenance are important. A dedicated latch feature can hold inputs at their previous logic states, while the family architecture supports operating speeds down to 5 ns in appropriately selected speed grades.
The device is a CMOS PLD with low power dissipation, including family-level typical power dissipation as low as 10 microamperes. The 24-SOIC package has a stated body width of 0.295 inch, or 7.50 mm, and uses a surface-mount gull-wing construction. The commercial suffix identifies the temperature-grade option, while the 15 code denotes the 15 ns performance class and SC denotes the package and ordering configuration.
Typical applications include legacy industrial control, instrumentation, communications interfaces, embedded control logic, test fixtures, and general-purpose glue logic. In these systems, the PLD can consolidate several gates, counters, state machines, or interface functions into one configurable device. Programmable behavior can also shorten revisions to production logic without changing the printed circuit board.
The primary design consideration is pin-compatible replacement planning. A substitute should reproduce the 24-SOIC footprint, 10-macrocell architecture, 5 V supply arrangement, and the required 15 ns timing class. Review the ATF22V10C(Q) datasheet pin description and programming documentation before replacing an installed device because package suffixes, speed grades, and programming-file compatibility must all be considered.
This product page combines the manufacturer datasheet, ordering information, package details, operating characteristics, practical application guidance, and a qualified same-package replacement assessment. It is structured to help engineers identify the correct ATF22V10CQ-15SC configuration and evaluate reuse of an existing 24-SOIC PCB footprint without relying on packaging-only assumptions.
Drop-in-Alternativen für ATF22V10CQ-15SC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
ATF22V10CQ-15SI
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATF22V10CQ-15SC Grenzwerte & elektrische Eigenschaften
| Device Type | High-performance electrically erasable programmable logic device (EE PLD) |
| Series | ATF22V10C |
| Macrocells | 10 macrocells |
| Propagation Delay | 15 ns |
| Program Memory Technology | Electrically erasable Flash memory |
| Process Technology | CMOS |
| Nominal Input Voltage | 5 V |
| Family Minimum Propagation Delay | 5 ns |
| Typical Low Power Dissipation | 10 microamperes |
| Temperature Grade | Commercial |
| Gehäuse | 24-SOIC |
| Package Body Width | 0.295 inch (7.50 mm) |
| Montageart | Surface Mount |
| Terminal Count | 24 terminals |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Latch Feature | Holds inputs at previous logic states |
ATF22V10CQ-15SC rectangular Pinbelegungsleitfaden
Pinbelegung für ATF22V10CQ-15SC (rectangular-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATF22V10CQ-15SC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATF22V10CQ-15SC ist geeignet für 6 Anwendungs: Industrial Control Logic, Programmable Interface Consolidation, Instrumentation Control, Test and Measurement Fixtures, Communication Interface Support, Embedded System Glue Logic.
Industrial Control Logic
The ATF22V10CQ-15SC fits compact industrial control logic that requires configurable Boolean functions, state transitions, and memory-based design flexibility. Its 10 macrocells and 15 ns propagation delay provide useful timing margin for general control paths operating from a nominal 5 V rail. Electrically erasable Flash allows logic revisions without replacing the physical device, which is valuable when production documentation, sequencing rules, or interface behavior changes during qualification. Place the 24-SOIC device where its programming and test access remain practical, and verify each external signal against the ATF22V10C(Q) datasheet pin descriptions.
Empfohlen
Programmable Interface Consolidation
The ATF22V10CQ-15SC can consolidate several interface and glue-logic functions into one 10-macrocell device. The 15 ns speed class is appropriate for many moderate-speed control and status signals, while its latch feature supports designs that must hold input states. Implementing protocol qualification, command decoding, or status decoding in the PLD reduces the number of separate fixed-function logic packages. Engineers should establish setup and hold requirements in the system timing budget and confirm that each selected pin can serve the intended registered, combinational, or latched function.
Empfohlen
Instrumentation Control
The ATF22V10CQ-15SC is suitable for instrumentation control paths that combine measurement sequencing, mode selection, status decoding, and operator-interface logic. Its 10 macrocells provide a practical capacity for compact equations and registered control functions, while the 15 ns propagation delay supports common peripheral-control tasks without implying suitability for every high-speed protocol. Electrically erasable Flash is especially useful for maintaining instrument behavior across engineering revisions. Validate timing against the slowest required control path and use the manufacturer's programming flow for production configuration and device verification.
Empfohlen
Test and Measurement Fixtures
The ATF22V10CQ-15SC can implement programmable routing, stimulus sequencing, pass/fail logic, and latch-based state retention in compact test fixtures. Its 10 macrocells and 15 ns speed class fit low-to-moderate-speed fixture control where flexibility matters more than very high edge-rate performance. Because the Flash configuration is electrically erasable, fixture logic can be updated as boards, adapters, or test sequences evolve. Keep programming access separate from the tested signal paths where practical, and verify absolute timing margins across connector, cable, and device delays rather than relying only on the nominal 15 ns figure.
Empfohlen
Communication Interface Support
The ATF22V10CQ-15SC can provide protocol-adjacent control logic, command qualification, framing assistance, and status decoding around a communications controller. Its 15 ns speed class makes it appropriate for support paths whose timing requirements are less restrictive than the primary data interface, but it should not be assumed to meet high-speed serial lane timing. The latch feature may help preserve handshake or fault information between controller events. Confirm input thresholds, output timing, and pin multiplexing in the ATF22V10C(Q) datasheet, then test the assembled interface across voltage, temperature, and process conditions used by the final system.
Empfohlen
Embedded System Glue Logic
The ATF22V10CQ-15SC is useful when a system needs a small amount of deterministic glue logic between processors, memories, sensors, or actuators. Ten macrocells can implement decoding, pulse generation, interlock conditions, and status mappings, while the 15 ns propagation delay provides a defined timing class for common board-level signals. Its nonvolatile programmable architecture allows the same PCB to accommodate several firmware or hardware-interface revisions. Keep the PLD's power and ground routing stable, avoid placing critical high-speed paths through unnecessary macrocell levels, and confirm all unused outputs in the final programmed design.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATF22V10CQ-15SC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATF22V10CQ-15SI |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 24-SOIC | 24-SOIC - same |
| Device Type | EE PLD | EE PLD |
| Series | ATF22V10C | ATF22V10C |
| Propagation Delay | 15 ns | 15 ns |
| Input Voltage | 5 V | 5 V |
Wichtigste Unterscheidungsmerkmale
- Exact 15 ns and 24-SOIC configuration match (vs. ATF22V10CQ-15SI)
- Nonvolatile electrically erasable configuration (vs. ATF22V10CQ-15SI)
- Compact configurable logic capacity (vs. ATF22V10CQ-15SI)
Designhinweise
Confirm that the 24-SOIC footprint matches the target board before installing a replacement, including lead pitch, body width, and gull-wing geometry. The ATF22V10CQ-15SC is specified in a 24-SOIC package with a stated body width of 0.295 inch, or 7.50 mm. Treat the ordering suffix as meaningful, and verify the exact MPN against the manufacturer ordering information rather than relying only on the package drawing.
Build a timing budget that includes the PLD's 15 ns propagation delay, external signal-path delay, setup and hold requirements, and clock or control uncertainty. The 15 ns value is a speed designation and should not replace the complete timing tables in the ATF22V10C(Q) datasheet. For paths crossing between the PLD and fast processors, confirm that the macrocell routing path and external clock distribution preserve the required margin.
Do not assume that any ATF22V10CQ orderable code is automatically interchangeable. The ATF22V10CQ-15SI is a package-and-timing replacement candidate, but the exact ordering suffix, programmed device configuration, and any device-specific behavior must be checked before production use. The ATF22V10CQ-15PC shown in cross-reference listings uses a 24-PDIP package and therefore is not a drop-in substitute for a 24-SOIC PCB footprint.
Decouple the 5 V supply close to the ATF22V10CQ-15SC using the capacitance and layout guidance specified by the manufacturer. Keep switching-current return paths away from sensitive control traces, provide a low-impedance ground reference, and avoid routing high-current outputs near timing-sensitive inputs. Although the ATF22V10C family can operate with power dissipation as low as 10 microamperes, the exact current depends on the programmed logic, operating state, and speed grade.
Compliance-Informationen
The target is identified as a commercial-grade logic IC, so AEC-Q100 automotive qualification is not applicable. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN.