ATMEGA165PV-8MNR - AVR 8-bit MCU 16KB 64-QFN | Microchip
Teilenummer: ATMEGA165PV-8MNR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.7259 | $4,73 |
| 10 | $4.49 | $44,90 |
| 100 | $4.11 | $411,00 |
| 500 | $3.78 | $1.890,00 |
| 1.000 | $3.49 | $3.490,00 |
ATMEGA165PV-8MNR Übersicht
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded systems hierarchy above discrete logic. The AVR architecture uses a Harvard structure with single-cycle instruction execution, allowing roughly 1 MIPS per MHz of clock, which lets designers trade clock speed against power consumption.
Key features of the ATMEGA165PV-8MNR include the 8-bit AVR core executing powerful instructions in a single clock cycle, 16KB Flash with ISP capability, 512B EEPROM for non-volatile parameter storage, 1KB internal SRAM, an on-chip 10-bit ADC, a 5V-tolerant industrial operating profile rated to 105C, and Green/RoHS-compliant packaging. The 64-QFN exposed-pad package provides excellent thermal dissipation and a low-inductance ground path for mixed analog-digital designs.
Technically, the device belongs to the picoPower-era ATmega165P family, offering low standby currents and brown-out detection suitable for battery-conscious products. The peripheral set typically includes UART/USART, SPI, and hardware interrupt sources supporting real-time embedded control tasks.
Typical applications include industrial control panels, consumer appliance user interfaces, battery-powered metering, and LED or LCD-driven human-machine interfaces where 16KB of code space is sufficient.
For design, ensure a decoupling network of at least one 100nF ceramic capacitor per supply pin pair plus bulk capacitance near the exposed pad, which must be soldered to a solid ground plane for both thermal and EMC performance.
This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-16.
Drop-in-Alternativen für ATMEGA165PV-8MNR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATMEGA165PV-8MNR (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Supply Voltage Range, Core Architecture, Program Memory Size.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATMEGA165PV-8MN
✅ Drop-In✓ Auf Lager
$1.36 / Stück
Datenblatt ansehen →ATMEGA165PA-MN
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$2.75 / Stück
Datenblatt ansehen →ATMEGA169PA-MN
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.05 / Stück
Datenblatt ansehen →ATMEGA169PA-MU
✅ Drop-In✓ Auf Lager
$4.1 / Stück
Datenblatt ansehen →ATMEGA165PV-8MNR Grenzwerte & elektrische Eigenschaften
| Core Architecture | 8-bit AVR RISC (Harvard) |
| Program Memory Size | 16KB (8K x 16) Flash |
| Program Memory Type | In-System Programmable Flash |
| EEPROM Size | 512B |
| SRAM Size | 1KB |
| Maximale Taktfrequenz | 8MHz |
| Supply Voltage Range | 1.8V to 5.5V (PV voltage grade) |
| Betriebstemperatur | -40C to +105C |
| Gehäuse | 64-QFN / MLF (9x9 mm) with Exposed Pad |
| Montageart | Surface Mount |
| Packaging | Tape and Reel |
| ADC | 10-bit ADC |
| Communication Interfaces | USART, SPI |
| Series | AVR ATmega |
| RoHS / Green Status | Green, RoHS compliant |
ATMEGA165PV-8MNR 64-qfn / mlf (9x9 mm) with exposed pad Pinbelegungsleitfaden
Pinbelegung für ATMEGA165PV-8MNR (64-qfn / mlf (9x9 mm) with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATMEGA165PV-8MNR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATMEGA165PV-8MNR ist geeignet für 6 Anwendungs: Industrial Control Panels, Battery-Powered Metering, Appliance User Interfaces, Embedded Networking Nodes, LED Lighting Controllers, Automotive Body Electronics (Non-Safety).
Industrial Control Panels
The ATMEGA165PV-8MNR fits industrial control panel designs because its 105C operating grade and 1.8V to 5.5V supply range tolerate hot enclosures and noisy 5V industrial rails. The 16KB Flash provides ample space for state-machine logic, MODBUS-style UART protocols, and parameter tables held in the 512B EEPROM, while the 10-bit ADC reads potentiometers and sensor feedback. In a typical panel controller, the AVR runs at 8MHz from a crystal with the USART handling communication to a PLC or HMI and SPI driving a display or I/O expander. The single-cycle AVR core delivers roughly 8 MIPS, sufficient for deterministic scan loops, and the exposed-pad 64-QFN package grounds cleanly to the panel PCB for EMC robustness.
Empfohlen
Battery-Powered Metering
For battery-powered metering products, the ATMEGA165PV-8MNR offers a 1.8V supply floor that lets the MCU run directly from two alkaline cells or a single lithium cell through end-of-discharge, while the 8MHz rating eliminates the need for boost converters at lower voltages. The 512B EEPROM stores calibration and tariff data through millions of power cycles, and the ADC samples current-shunt or divider inputs for energy measurement. The ATmega165P family's power-management modes allow the CPU to sleep between samples, with wake sources from UART and external interrupts, stretching battery life. The 64-QFN exposed pad also improves thermal coupling for temperature-compensated measurement reference circuits on compact meter PCBs.
Empfohlen
Appliance User Interfaces
Appliance user-interface boards - oven keypads, washing-machine displays, coffee-machine controls - are a natural fit for the ATMEGA165PV-8MNR. Its 16KB Flash holds menu logic, debounce routines, and multi-language string tables, while the 1KB SRAM buffers display frames and touch/keypad scan states. The ADC reads NTC temperature sensors and mains-synchronized zero-cross detection for triac control of heaters and motors, and the USART/SPI peripherals link to front-panel displays. Operation to 105C suits installations near heat sources such as ovens, and the Green RoHS 64-QFN package meets consumer-appliance environmental requirements in Europe and Asia while the exposed pad aids heat spreading on high-density UI boards.
Empfohlen
Embedded Networking Nodes
In embedded networking nodes such as sensor gateways and RS-485 field devices, the ATMEGA165PV-8MNR provides the USART needed for protocol stacks and the SPI needed to attach Ethernet, CAN, or RF co-processors. The 8MHz 8-bit AVR core executes compact, interrupt-driven firmware with deterministic timing for frame handling, and the 1KB SRAM accommodates packet buffers for lightweight protocols at low data rates. The 105C industrial grade suits DIN-rail and outdoor enclosures, while the wide 1.8V to 5.5V input range simplifies integration into mixed 3.3V/5V backplanes without level shifting. The 64-QFN package offers enough general-purpose I/O for address selection, status LEDs, and watchdog signaling on node boards.
Empfohlen
LED Lighting Controllers
The ATMEGA165PV-8MNR serves as the control core in LED lighting ballasts and dimmer modules. Its ADC measures current via shunt resistors and reads dimmer-position inputs, while timer/PWM firmware output drives MOSFET gates or constant-current driver ICs through the SPI port. The 16KB Flash is sufficient for DALI or DMX-512 style protocol firmware, and the 105C rating withstands luminaire enclosures where ambient temperatures routinely exceed 70C. The PV grade's 1.8V to 5.5V operation supports both 3.3V logic and legacy 5V designs, and the 64-QFN exposed pad gives a low-inductance ground that reduces switching-noise coupling into analog measurement circuits, improving dimming stability and flicker performance.
Empfohlen
Automotive Body Electronics (Non-Safety)
For non-safety automotive body functions - seat-position memory, mirror control, interior lighting - the ATMEGA165PV-8MNR's 105C grade, 5V tolerance, and robust AVR interrupt structure address typical cabin-ECU requirements. The 512B EEPROM retains learned positions and user settings across battery disconnects, and the ADC handles LIN-relevant supply monitoring and NTC feedback. Note this exact orderable part is not an AEC-Q100-qualified automotive variant, so designers should validate qualification requirements or select Microchip's automotive-grade ATmega equivalents for safety-relevant or formally qualified programs. The 64-QFN MLF package survives vibration better than gull-wing packages due to reduced solder-joint stress from its compact 9x9 mm footprint.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATMEGA165PV-8MNR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATMEGA165PV-8MN | ATMEGA165PA-MN | ATMEGA169PA-MN | ATMEGA165P-16ANR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16KB | 16KB | 16KB | 16KB | 16KB |
| SRAM | 1KB | 1KB | 1KB | 1KB | 1KB |
| LCD Segment Driver | No | No | No | Yes | No |
Wichtigste Unterscheidungsmerkmale
- 105C industrial temperature grade (vs. ATMEGA164PA-AUR)
- Wide 1.8V to 5.5V supply range at 8MHz (vs. ATMEGA165P-16ANR)
- Tape and Reel packing for automated assembly (vs. ATMEGA165PV-8MN)
- No LCD driver complexity (vs. ATMEGA169PA-MN)
Designhinweise
The 64-QFN (9x9 mm) MLF package has an exposed pad on the underside that must be soldered to a grounded thermal pad on the PCB - it is not optional. Define an array of thermal vias (typically 4x4 or 5x5) connecting the exposed pad to internal ground planes. QFN packages also require careful stencil design: use ~50-60% coverage on the center pad aperture to avoid solder voiding, and full apertures with pull-back on perimeter pins. Follow Microchip's MLF/QFN application guidelines for land-pattern geometry.
Decouple every VCC/AVCC pin pair with a 100nF ceramic capacitor placed within 3-5 mm of the pin, plus at least one 4.7uF-10uF bulk capacitor near the package. The 10-bit ADC requires AVCC filtered with an LC network (10uH inductor + 10uF) for full accuracy, and the internal reference benefits from a 100nF capacitor on AREF. Do not let AVCC float; connect it to VCC when ADC accuracy is not critical. Estimated supply current scales roughly linearly with clock: at 5V/8MHz expect active current in the low-mA range per the datasheet electrical characteristics.
Observe maximum clock versus supply voltage limits before raising frequency: this PV grade is rated 8MHz, and ATmega parts with different speed codes (e.g., 16MHz grades) cannot simply be substituted onto the same board without verifying crystal frequency and voltage derating tables. Also verify the ISP programming pin sharing: pins used for SPI programming (MOSI, MISO, SCK) must not be loaded heavily on the target board or ISP programming will fail. Finally, confirm the RESET pin pull-up is present if any external circuitry can pull it low during power-up.
Compliance-Informationen
Listed as Green (RoHS-compliant, lead-free MLF) per FindIC and distributor data. REACH, halogen-free, and conflict-minerals status should be confirmed with Microchip's formal compliance certificates.
