ATMEGA16M1-MU - 8-bit AVR MCU, CAN, 16KB Flash | Microchip
Teilenummer: ATMEGA16M1-MU ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5.11 | $5,11 |
| 10 | $4.85 | $48,50 |
| 100 | $4.42 | $442,00 |
| 500 | $4.1 | $2.050,00 |
| 1.000 | $3.85 | $3.850,00 |
ATMEGA16M1-MU Übersicht
A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals into one package, sitting at the lowest level of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> complete electronic system. The AVR family uses a modified Harvard RISC architecture in which most of its 133 powerful instructions execute in a single clock cycle, giving high code density and deterministic performance for real-time embedded control.
Key features of the ATMEGA16M1-MU include the on-chip CAN 2.0A/B controller with six message objects for automotive and industrial networking, a LIN 2.1 controller for low-cost vehicle subnetworks, and a PSC that generates complementary PWM outputs with dead-time insertion - ideal for motor control and lighting ballasts. The 8-channel 10-bit ADC supports sensor acquisition, and the JTAG interface enables on-chip debug and boundary-scan programming. The device operates from a 2.7 V to 5.5 V supply, covering both 3.3 V and 5 V systems.
Technically, the self-programming Flash allows in-system firmware updates via bootloaders, while the AVR core delivers up to 16 MIPS at 16 MHz. The exposed-pad QFN-32 package provides good thermal and electrical performance for compact designs.
Typical applications include automotive body and LIN/CAN gateway nodes, BLDC and PMSM motor control using the PSC, and industrial automation sensors and actuators that benefit from the robust CAN interface.
Design consideration: the QFN exposed pad must be soldered to a grounded copper pour for reliable operation and optimal ADC noise performance; verify CAN transceiver compatibility when designing the physical layer.
This page synthesizes verified distributor pricing, drop-in family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, giving engineers a complete selection resource in one place.
Drop-in-Alternativen für ATMEGA16M1-MU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATMEGA16M1-MU (gleiche Bauform und Footprint) – abweichend in Core, EEPROM, Package, SRAM.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATMEGA32M1-MU
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATMEGA8M1-MU
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATMEGA64M1-MU
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$6.55 / Stück
Datenblatt ansehen →ATMEGA16M1-MU Grenzwerte & elektrische Eigenschaften
| Core | AVR 8-bit RISC |
| Max Clock Frequency | 16 MHz |
| Flash Program Memory | 16 KB (8K x 16) |
| SRAM | 1 KB |
| EEPROM | 512 B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| CAN Controller | Yes, 6 message objects |
| LIN Controller | Yes |
| Power Stage Controller (PSC) | Yes |
| ADC Resolution | 10-bit |
| ADC Channels | 8 channels |
| Debug Interface | JTAG (on-chip debug) |
| Instructions | 133 instructions, most single-cycle |
| Gehäuse | 32-QFN (7x7 mm), exposed pad |
| Montageart | Surface Mount |
ATMEGA16M1-MU 32-qfn (7x7 mm), exposed pad Pinbelegungsleitfaden
Pinbelegung für ATMEGA16M1-MU (32-qfn (7x7 mm), exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATMEGA16M1-MU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATMEGA16M1-MU ist geeignet für 6 Anwendungs: Automotive CAN/LIN Body Electronics, BLDC and PMSM Motor Control, Industrial Automation Sensor Nodes, Lighting Ballast and LED Driver Control, Pump and Fan Control Systems, Battery-Powered Embedded Devices.
Automotive CAN/LIN Body Electronics
The ATMEGA16M1-MU fits body-control and network-gateway nodes because it integrates both a CAN 2.0A/B controller with six hardware message objects and a LIN controller on a single die, eliminating external communication ICs and reducing PCB area in a 7x7 mm QFN-32 footprint. Its 16 KB self-programming Flash accommodates a CAN application layer plus a firmware-update bootloader, while operation from a 5 V automotive rail within the 2.7 V to 5.5 V range removes the need for a secondary regulator. Used as a CAN-to-LIN bridge or actuator node, the part handles message filtering in hardware message objects, lowering CPU load; the single-cycle AVR core at 16 MHz provides deterministic response for time-critical bus handling.
Empfohlen
BLDC and PMSM Motor Control
The on-chip Power Stage Controller (PSC) makes the ATMEGA16M1-MU a compact single-chip motor controller. The PSC generates complementary PWM pairs with programmable dead-time insertion, exactly what a three-phase inverter driving a BLDC or PMSM requires, and the 8-channel 10-bit ADC samples current-shunt and position-sensor inputs simultaneously. At 16 MHz the AVR core executes block-commutation or sensorless algorithms with cycle-level determinism, avoiding the jitter of software-generated PWM. Firmware fits comfortably in 16 KB Flash with headroom for fault handling and CAN reporting. The exposed-pad QFN package aids heat dissipation when placed near gate-driver circuitry; a solid grounded pour under the pad is recommended to keep ADC noise low during current sampling.
Empfohlen
Industrial Automation Sensor Nodes
In factory automation, the ATMEGA16M1-MU serves as a networked sensor or actuator node where the robust CAN interface withstands electrically noisy environments better than RS-485-based schemes at similar cost. The 8-channel 10-bit ADC digitizes multiple analog sensors - pressure, level, or position - while the 512 B EEPROM stores calibration constants through power cycles. The 133-instruction single-cycle AVR core completes filter and scaling routines with predictable timing. The 2.7 V to 5.5 V supply range permits direct operation from a 5 V industrial rail or a 3.3 V logic rail. Six CAN hardware message objects offload frame buffering from software, letting the MCU remain responsive to control loops while streaming status onto the bus.
Empfohlen
Lighting Ballast and LED Driver Control
The Power Stage Controller's complementary PWM outputs with adjustable dead-time also suit resonant lighting ballasts and high-power LED drivers, where half-bridge stages demand precise gate timing to prevent shoot-through. The ATMEGA16M1-MU closes the control loop using its 10-bit ADC for current and voltage feedback, adjusting PSC duty and frequency digitally in firmware. Sixteen KB of Flash holds startup sequences, fault protection, and optional DALI or CAN lighting-network stacks, making one MCU the entire control element of the fixture. Because the PSC hardware handles PWM generation, the CPU is free to manage communication and protection logic, and the deterministic single-cycle core keeps loop latencies consistent across all operating conditions.
Empfohlen
Pump and Fan Control Systems
HVAC circulation pumps, automotive cooling fans, and industrial blowers benefit from the ATMEGA16M1-MU's combination of motor-control PWM hardware and network connectivity in one chip. The PSC drives the inverter stage while the ADC monitors winding current and temperature-derived voltages; firmware implements soft-start, speed profiling, and stall detection within the 16 KB Flash. The CAN controller reports speed, fault codes, and diagnostic data to the vehicle or building controller via six hardware message objects, and the LIN controller offers a lower-cost bus option for simple fan modules. Operating directly from a 12 V-derived 5 V rail within the 2.7 V to 5.5 V range simplifies the power tree in fan-housing PCBs.
Empfohlen
Battery-Powered Embedded Devices
Although not the lowest-power AVR, the ATMEGA16M1-MU serves battery-backed controllers where CAN or LIN communication is mandatory, such as portable diagnostic tools and battery-management gateway nodes. The 2.7 V low end of the supply range allows operation from a single Li-ion cell via an LDO, and the 512 B EEPROM retains configuration through battery swaps. Firmware stored in the 16 KB self-programming Flash can be field-updated over the CAN or LIN bus using a bootloader, avoiding physical access for updates. The 32-pin QFN keeps the PCB footprint small for handheld enclosures, and the JTAG interface accelerates development debugging before deployment in the field.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATMEGA16M1-MU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATMEGA32M1-MU | ATMEGA8M1-MU | ATMEGA64M1-MU |
|---|---|---|---|---|
| Package | 32-QFN (7x7 mm), exposed pad | 32-QFN (7x7 mm) - same | 32-QFN (7x7 mm) - same | 32-QFN (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 16 KB | 32 KB | 8 KB | 64 KB |
| SRAM | 1 KB | 2 KB | 1 KB | 4 KB |
| Max Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| CAN Controller | Yes, 6 message objects | Yes, 6 message objects | Yes, 6 message objects | Yes, 6 message objects |
| LIN / PSC / 10-bit ADC | Yes / Yes / 8-ch | Yes / Yes / 8-ch | Yes / Yes / 8-ch | Yes / Yes / 8-ch |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Relative Cost | Baseline (approx. $5.11 @ qty 1) | Higher (more Flash) | Lower (cost-down) | Highest (most memory) |
Wichtigste Unterscheidungsmerkmale
- Balanced 16 KB Flash with full peripheral set (vs. ATMEGA8M1-MU)
- Lowest-memory family member when firmware is small (vs. ATMEGA32M1-MU)
- Single-chip CAN + LIN + PSC integration (vs. Generic AVR MCUs without CAN (e.g., classic ATmega16 devices))
Designhinweise
The ATMEGA16M1-MU is a 32-pin QFN with an exposed thermal pad that is the device ground. Solder the pad to a solid grounded copper pour with an array of thermal vias (e.g., 3x3 grid) connecting to inner/ground layers. This is not optional for reliability: the exposed pad provides the primary ground connection and heat dissipation path, and poor pad soldering is a leading cause of intermittent ground faults and elevated ADC noise in QFN designs. Follow Microchip QFN layout guidelines for stencil apertures (typically 50-70% coverage) to avoid solder voiding under the pad.
For clean ADC measurements, place a 100 nF ceramic capacitor directly at each VCC/AVCC pin pair plus a bulk 10 uF capacitor, and keep analog traces (ADC inputs, AREF) away from the CAN transceiver and PSC/PWM output traces. The PSC switching edges carry high di/dt; route them short and wide over a continuous ground plane. When the CAN transceiver shares the 5 V rail, consider an RC or ferrite filter to AVCC so bus transients do not couple into converter readings.
Verify the firmware footprint before committing to the 16 KB part: a bootloader (self-programming Flash) plus a full CAN application layer and motor-control algorithm can approach the 16 KB limit. Design the PCB for the QFN-32 family footprint so ATMEGA8M1-MU (cost-down) or ATMEGA32M1/64M1-MU (memory upgrades) can be populated without layout change. Also confirm CAN transceiver selection matches the intended bus speed (up to 1 Mbit/s for CAN 2.0B), and enable JTAG fuse settings deliberately since JTAG pins are shared with port C I/O.
Compliance-Informationen
Distributor listings (DigiKey, Heisener) present the ATMEGA16M1-MU as RoHS-compliant and lead-free. REACH, halogen-free, and conflict-minerals statuses were not stated in the provided data and should be confirmed from the official Microchip product page or material declaration.
