ATSAM4LC4BA-AU - 48MHz Cortex-M4 256KB MCU | Microchip
Teilenummer: ATSAM4LC4BA-AU ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5.42 | $5,42 |
| 10 | $4.88 | $48,80 |
| 100 | $4.35 | $435,00 |
| 500 | $3.92 | $1.960,00 |
| 1.000 | $3.55 | $3.550,00 |
ATSAM4LC4BA-AU Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals into one package, sitting at the lowest level of the embedded-system hierarchy: semiconductor -> integrated circuit -> processor -> microcontroller unit (MCU). The SAM4L family is Microchip's ultra-low-power Cortex-M4 line, designed for battery-operated and energy-harvesting systems where every microamp matters.
The defining feature of the ATSAM4LC4BA-AU is power efficiency: it delivers 90 uA/MHz in active mode, 1.5 uA in sleep mode, and the shortest wake-up time in a Cortex-M4-based device, down to 1.5 us. The device also integrates advanced crypto support and a secure boot feature (per the Mouser product listing), which protect firmware and sensitive data in connected designs.
Architecturally, the Cortex-M4 core with a 3-stage pipeline executes ARM Thumb-2 code with DSP-oriented instructions, while the flexible event system and multiple sleep modes let designers shut down unused domains. Supply operation spans 1.8 V to 3.3 V, allowing direct battery or Li-ion rail operation without an intermediate regulator. The 64-pin TQFP with 0.5 mm pitch offers a good balance of GPIO count and hand-solderable, inspectable leads for prototyping.
Typical applications include battery-powered sensor nodes and IoT end devices, portable medical and metering products, and low-power industrial control where cryptographic key storage and fast wake-up from deep sleep are required.
Design consideration: exploit the SAM4L's hierarchical sleep modes and the event system so peripherals can operate while the CPU sleeps; waking at only 1.5 us means polling loops can often be replaced by sleep-wait cycles for major energy savings.
This page adds value beyond the manufacturer datasheet by consolidating drop-in family alternatives, application-specific pairing suggestions, and distributor pricing context in one engineer-focused reference.
Drop-in-Alternativen für ATSAM4LC4BA-AU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAM4LC4BA-AU (gleiche Bauform und Footprint) – abweichend in Operating Temperature, RoHS Status, Series, Flash Memory, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATSAM4LC2BA-AU
✅ Drop-In✓ Auf Lager
$3.8 / Stück
Datenblatt ansehen →ATSAM4LC8BA-AU
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATSAM4LC4CA-AU
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$6.65 / Stück
Datenblatt ansehen →ATSAM4LS4BA-AU
✅ Drop-In✓ Auf Lager
$6.02 / Stück
Datenblatt ansehen →ATSAM4LC4BA-AU Grenzwerte & elektrische Eigenschaften
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-bit |
| Maximale Taktfrequenz | 48 MHz |
| Flash Memory | 256KB (256K x 8) |
| SRAM | 32KB |
| Versorgungsspannung | 1.8 V to 3.3 V |
| Active Mode Current | 90 uA/MHz |
| Sleep Mode Current | 1.5 uA |
| Wake-up Time | 1.5 us |
| Gehäuse | 64-TQFP (10x10 mm) |
| Montageart | Surface Mount |
| Betriebstemperatur | Industrial temperature range |
| Security Features | Crypto support, Secure Boot |
| Series | SAM4L (SAM4LC4B) |
| Pin-Anzahl | 64 |
ATSAM4LC4BA-AU 64-tqfp (10x10 mm) Pinbelegungsleitfaden
Pinbelegung für ATSAM4LC4BA-AU (64-tqfp (10x10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATSAM4LC4BA-AU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATSAM4LC4BA-AU ist geeignet für 6 Anwendungs: Battery-Powered IoT Sensor Nodes, Portable Medical Monitoring, Smart Metering, Low-Power Industrial Control, Consumer Wearables and Remote Controls, Data Loggers and Energy Harvesting Systems.
Battery-Powered IoT Sensor Nodes
The ATSAM4LC4BA-AU fits battery-powered IoT nodes because its 90 uA/MHz active draw and 1.5 uA sleep current extend coin-cell life to years: a node sampling once per minute with a 10 ms active window spends over 99.9% of its time at 1.5 uA. The 1.5 us wake-up means radio or sensor transactions start almost instantly after sleep, avoiding wasteful idle spins. Operating from 1.8 V to 3.3 V, it connects directly to a CR2032 or Li-SOCl2 cell without a regulator. Peripherals can run via the event system while the Cortex-M4 core sleeps, further cutting energy per sample. Crypto support and secure boot authenticate firmware for over-the-air updates, a must for deployed fleets. Recommended design pattern: sensor burst-read, local filtering, then radio burst transmission between deep-sleep intervals.
Empfohlen
Portable Medical Monitoring
Portable and wearable medical monitors demand long battery life, deterministic signal processing, and data security - all addressed by the ATSAM4LC4BA-AU. The Cortex-M4 core with DSP instructions executes FFT and filter kernels on physiological signals (ECG, SpO2, motion) at 48 MHz while sipping only 90 uA/MHz, so a full day of intermittent monitoring is practical on a small Li-ion cell. The 1.5 us wake-up lets the MCU react to patient-motion interrupts immediately, capturing events without pre-trigger buffering that consumes SRAM. With 32KB SRAM there is room for signal buffers and a lightweight BLE stack companion. Hardware crypto and secure boot protect patient data at rest and verified firmware images, supporting confidentiality expectations in connected health products. The industrial temperature range covers body-adjacent and charging-dock environments.
Empfohlen
Smart Metering
Electricity, water, and gas meters run unattended for a decade or more, making the SAM4L's power profile decisive. The ATSAM4LC4BA-AU's 1.5 uA sleep current and 90 uA/MHz active current let a meter accumulate consumption pulses from a low-power sensor front end while the CPU sleeps, waking only to integrate, log, and periodically communicate. The 256KB flash stores tariff tables, multi-year load-profile logs, and a communication stack (M-Bus, RF mesh) with room to spare; 32KB SRAM buffers packetization. Secure boot and the crypto engine protect billing integrity against firmware tampering and cloned meters - a procurement requirement in many utility tenders. The 1.8 V minimum supply supports direct operation from backup cells to keep metrology alive during main-supply outages, and the 64-TQFP footprint fits typical meter PCB spacing.
Empfohlen
Low-Power Industrial Control
In industrial nodes such as remote I/O, condition-monitoring sensors, and small actuators, the ATSAM4LC4BA-AU provides deterministic 32-bit control with exceptional idle power. The 48 MHz Cortex-M4 closes control loops with DSP filters, while the event system can gate peripherals from timers and comparators without CPU intervention, dropping average draw toward the 1.5 uA sleep floor between cycles. Crypto support secures MODBUS/TCP-style credential storage and authenticated firmware updates on networked field devices. The industrial temperature grade suits cabinets and outdoor enclosures, and the 0.5 mm-pitch TQFP-64 survives vibration better than fine-pitch BGA. The 1.8-3.3 V rail range simplifies integration with 3.3 V logic and buffered analog fronts. Wake-up of 1.5 us supports event-driven architectures that replace wasteful polling with interrupt-driven, sleep-dominant state machines.
Empfohlen
Consumer Wearables and Remote Controls
Wearables, fitness bands, and smart remote controls live or die on battery life and responsiveness - the ATSAM4LC4BA-AU addresses both. Its 1.5 us wake-up allows instant reaction to button presses or tap interrupts, giving users the perception of an always-on device while electronics spend most time in 1.5 uA sleep. The Cortex-M4 with DSP handles sensor-fusion math (accelerometer/gyro filtering) at 48 MHz without a separate co-processor, and 256KB flash fits BLE-stack-linked firmware with display drivers. Hardware crypto secures pairing keys and DRM-sensitive data. The 1.8 V floor matches single-cell Li-ion with minimal regulator overhead, and the 64-TQFP gives enough GPIO for button matrices, haptic drivers, and display interfaces at PCB sizes typical of wearable main boards. Event-driven sleep scheduling is the recommended firmware architecture.
Empfohlen
Data Loggers and Energy Harvesting Systems
Solar-, thermal-, and vibration-harvesting loggers need MCUs whose energy budget matches harvested supply - the ATSAM4LC4BA-AU is a strong fit. With 90 uA/MHz active and 1.5 uA sleep, a cold-start sample-log-transmit cycle costs only tens of microjoules when duty-cycled, allowing operation from small supercapacitors or indoor photovoltaic cells. The 1.5 us wake-up from sleep keeps latency near zero for event-triggered logging, and the 256KB flash archives months of timestamped records with compression. Secure boot ensures logged data provenance in audit and compliance scenarios, and the crypto engine can sign records. Direct 1.8-3.3 V operation matches storage-element voltage swings without regulators, and brown-out safe wake-up behavior supports power-fail-resilient logging. Pair with an energy-conditional reset supervisor for maximum robustness.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATSAM4LC4BA-AU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATSAM4LC2BA-AU | ATSAM4LC8BA-AU | ATSAM4LC4CA-AU | ATSAM4LS4BA-AU |
|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Clock | ARM Cortex-M4, 48 MHz | ARM Cortex-M4, 48 MHz | ARM Cortex-M4, 48 MHz | ARM Cortex-M4, 48 MHz | ARM Cortex-M4, 48 MHz |
| Flash Memory | 256KB | 128KB | 512KB | 128KB | 256KB |
| SRAM | 32KB | 16KB | 64KB | 32KB | 32KB |
| Active Current | 90 uA/MHz | 90 uA/MHz | 90 uA/MHz | 90 uA/MHz | 90 uA/MHz |
| Sleep Current / Wake-up | 1.5 uA / 1.5 us | 1.5 uA / 1.5 us | 1.5 uA / 1.5 us | 1.5 uA / 1.5 us | 1.5 uA / 1.5 us |
| Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
Wichtigste Unterscheidungsmerkmale
- Balanced 256KB flash density at lowest cost per KB (vs. ATSAM4LC2BA-AU)
- Right-sized memory for cost-sensitive BOMs (vs. ATSAM4LC8BA-AU)
- Same power envelope as the entire family (vs. ATSAM4LC4CA-AU)
Designhinweise
Exploit the SAM4L sleep hierarchy: the headline 1.5 uA sleep figure applies only when unused peripherals are clock-gated and unused I/O are configured as grounded inputs. Estimated: a node active 10 ms every 60 s at 48 MHz (~4.3 mA) averages about 12 uA, versus 4.3 mA in a polling design - a 350x energy saving. Disable the cache and unused clock domains before entering WAIT mode, and route wake sources to the asynchronous EIC so the CPU never needs to poll.
Decouple every VDD/VDDIO pin pair with 100 nF ceramics placed within 2 mm of the pin, plus one bulk 4.7-10 uF per supply domain. The TQFP-64 exposed lead frame tolerates standard reflow, but keep the crystal within 10 mm of the OSC pins with guard ground. Avoid routing fast switching signals (radio PA lines) under the package; the 0.5 mm pitch leaves little crosstalk margin between adjacent leads.
The B-suffix denotes 256KB flash, but the code region is smaller than the physical flash when the secure-boot/locked region is enabled - budget firmware size accordingly. Verify supply sequencing against the SAM4L datasheet when the 1.8 V rail rises slower than the 3.3 V rail, and confirm that VDDCORE settings match the datasheet recommendation before raising the clock above 12 MHz. Do not assume STM32-style register maps - the SAM4L peripheral architecture differs fundamentally.
Compliance-Informationen
Mouser listing describes the part as 'Green' package, typically indicating RoHS-compliant, lead-free construction, but explicit RoHS/REACH certificate data was not present in the verified web data - confirm on the Microchip product page.
