ATSAME54P20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
Teilenummer: ATSAME54P20A-AUT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $13.96 | $13,96 |
| 10 | $12.5 | $125,00 |
| 100 | $11.2 | $1.120,00 |
| 500 | $9.8 | $4.900,00 |
| 1.000 | $8.95 | $8.950,00 |
ATSAME54P20A-AUT Übersicht
What is a Cortex-M4F microcontroller? A Cortex-M4F (Cortex-M4 with Floating-Point Unit) is an ARM processor core designed for embedded systems that need both DSP-class signal processing and IEEE 754 single-precision floating-point math. It belongs to the Cortex-M family -> 32-bit MCU hierarchy -> embedded microprocessor -> semiconductor. The 'M' variants use Thumb-2 instruction set with deterministic interrupt latency, distinguishing them from Cortex-A application cores used in Linux systems.
Key features of the ATSAME54P20A-AUT include a 120 MHz CPU with single-precision FPU, 1 MB dual-panel Flash supporting live firmware update, 256 KB SRAM, plus connectivity peripherals including 10/100 Ethernet MAC, dual CAN-FD, USB 2.0 High-Speed, and SD/SDIO/eMMC host. The SAM E54 also integrates a 12-bit 1 Msps ADC, DAC, analog comparators, and SERCOM (serial communication) ports for flexible peripheral mapping.
Architecturally, the SAM E54 uses Microchip's Event System for zero-latency inter-peripheral signaling, a hardware cryptographic module supporting AES/SHA/TRNG, and a Dual-Panel Flash architecture that allows one bank to be updated while code runs from the other - critical for functional safety and Over-The-Air (OTA) firmware updates. The Cortex-M4F delivers 1.25 DMIPS/MHz with DSP extensions for sensor fusion and motor control loops.
Typical applications include industrial PLCs and motor drives with FOC algorithms, automotive body and gateway ECUs, building automation BACnet/Modbus nodes, IoT edge gateways with Ethernet connectivity, and consumer audio DSP products. The combination of CAN-FD + Ethernet + Cortex-M4F DSP makes the SAME54 ideal for industrial protocol bridging.
When designing with this device, plan for a robust 3.3V LDO or DC-DC supply with bulk decoupling, route the Ethernet MII/RMII signals with controlled-impedance traces, and reserve the dual-panel Flash banks for A/B OTA partitioning. Use Microchip's MPLAB Harmony 3 or ASF4 frameworks and SEGGER Embedded Studio for IDE support.
Drop-in-Alternativen für ATSAME54P20A-AUT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAME54P20A-AUT (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Core, USB, ADC, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATSAME54P20A-AU
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATSAME54P20A-AFT
✅ Drop-In✓ Auf Lager
$9.14 / Stück
Datenblatt ansehen →ATSAME54P20A-AF
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.14 / Stück
Datenblatt ansehen →ATSAME54P19A-AUT-EFP
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.65 / Stück
Datenblatt ansehen →ATSAME54N20A-AUT
✅ Drop-In✓ Auf Lager
$7.1 / Stück
Datenblatt ansehen →ATSAME54N19A-AUT
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$5.94 / Stück
Datenblatt ansehen →ATSAME54P20A-AUT Grenzwerte & elektrische Eigenschaften
| Core | ARM Cortex-M4F (with FPU and DSP) |
| Maximum CPU Clock | 120 MHz |
| Flash Memory | 1 MB (Dual Panel, with ECC) |
| SRAM | 256 KB (with ECC) |
| Operating Voltage | 1.62 V to 3.6 V |
| Gehäuse | 128-pin TQFP (14x14 mm) |
| Operating Temperature (Automotive grade) | Up to +85C |
| Ethernet | 10/100 MAC (GMAC) |
| CAN | 2x CAN-FD |
| USB | USB 2.0 High-Speed with PHY |
| ADC | 12-bit, up to 1 Msps |
| DAC | 12-bit |
| Cryptographic Acceleration | AES, SHA-256, TRNG |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
ATSAME54P20A-AUT Pin-Konfiguration
| Pin 1 | PD0 — GPIO PD0 (general purpose I/O) |
| Pin 2 | PD1 — GPIO PD1 (general purpose I/O) |
| Pin 3 | PD2 — GPIO PD2 (general purpose I/O) |
| Pin 4 | PD3 — GPIO PD3 (general purpose I/O) |
| Pin 5 | VDDIN |
| Pin 6 | GND — Ground |
| Pin 7 | PD4 — GPIO PD4 (general purpose I/O) |
| Pin 8 | PD5 — GPIO PD5 (general purpose I/O) |
| Pin 9 | PD6 — GPIO PD6 (general purpose I/O) |
| Pin 10 | PD7 — GPIO PD7 (general purpose I/O) |
| Pin 11 | PD8 — GPIO PD8 (general purpose I/O) |
| Pin 12 | PD9 — GPIO PD9 (general purpose I/O) |
| Pin 13 | PD10 — GPIO PD10 (general purpose I/O) |
| Pin 14 | PD11 — GPIO PD11 (general purpose I/O) |
| Pin 15 | PD12 — GPIO PD12 (general purpose I/O) |
| Pin 16 | PD13 — GPIO PD13 (general purpose I/O) |
| Pin 17 | PD14 — GPIO PD14 (general purpose I/O) |
| Pin 18 | PD15 — GPIO PD15 (general purpose I/O) |
| Pin 19 | VDDIO — I/O voltage supply |
| Pin 20 | GND — Ground |
| Pin 21 | PC0 — GPIO PC0 (general purpose I/O) |
| Pin 22 | PC1 — GPIO PC1 (general purpose I/O) |
| Pin 23 | PC2 — GPIO PC2 (general purpose I/O) |
| Pin 24 | PC3 — GPIO PC3 (general purpose I/O) |
| Pin 25 | PC4 — GPIO PC4 (general purpose I/O) |
| Pin 26 | PC5 — GPIO PC5 (general purpose I/O) |
| Pin 27 | PC6 — GPIO PC6 (general purpose I/O) |
| Pin 28 | PC7 — GPIO PC7 (general purpose I/O) |
| Pin 29 | PC8 — GPIO PC8 (general purpose I/O) |
| Pin 30 | PC9 — GPIO PC9 (general purpose I/O) |
| Pin 31 | PC10 — GPIO PC10 (general purpose I/O) |
| Pin 32 | PC11 — GPIO PC11 (general purpose I/O) |
| Pin 33 | PC12 — GPIO PC12 (general purpose I/O) |
| Pin 34 | PC13 — GPIO PC13 (general purpose I/O) |
| Pin 35 | PC14 — GPIO PC14 (general purpose I/O) |
| Pin 36 | PC15 — GPIO PC15 (general purpose I/O) |
| Pin 37 | PA0 — GPIO PA0 (general purpose I/O) |
| Pin 38 | PA1 — GPIO PA1 (general purpose I/O) |
| Pin 39 | PA2 — GPIO PA2 (general purpose I/O) |
| Pin 40 | PA3 — GPIO PA3 (general purpose I/O) |
| Pin 41 | PA4 — GPIO PA4 (general purpose I/O) |
| Pin 42 | PA5 — GPIO PA5 (general purpose I/O) |
| Pin 43 | PA6 — GPIO PA6 (general purpose I/O) |
| Pin 44 | PA7 — GPIO PA7 (general purpose I/O) |
| Pin 45 | PA8 — GPIO PA8 (general purpose I/O) |
| Pin 46 | PA9 — GPIO PA9 (general purpose I/O) |
| Pin 47 | PA10 — GPIO PA10 (general purpose I/O) |
| Pin 48 | PA11 — GPIO PA11 / USB D- |
| Pin 49 | PA12 — GPIO PA12 / USB D+ |
| Pin 50 | PA13 — GPIO PA13 (general purpose I/O) |
| Pin 51 | PA14 — GPIO PA14 (general purpose I/O) |
| Pin 52 | PA15 — GPIO PA15 (general purpose I/O) |
| Pin 53 | VDDIO — I/O voltage supply |
| Pin 54 | GND — Ground |
| Pin 55 | PB0 — GPIO PB0 (general purpose I/O) |
| Pin 56 | PB1 — GPIO PB1 (general purpose I/O) |
| Pin 57 | PB2 — GPIO PB2 (general purpose I/O) |
| Pin 58 | PB3 — GPIO PB3 (general purpose I/O) |
| Pin 59 | PB4 — GPIO PB4 (general purpose I/O) |
| Pin 60 | PB5 — GPIO PB5 (general purpose I/O) |
| Pin 61 | PB6 — GPIO PB6 (general purpose I/O) |
| Pin 62 | PB7 — GPIO PB7 (general purpose I/O) |
| Pin 63 | PB8 — GPIO PB8 (general purpose I/O) |
| Pin 64 | PB9 — GPIO PB9 (general purpose I/O) |
| Pin 65 | PB10 — GPIO PB10 (general purpose I/O) |
| Pin 66 | PB11 — GPIO PB11 (general purpose I/O) |
| Pin 67 | PB12 — GPIO PB12 (general purpose I/O) |
| Pin 68 | PB13 — GPIO PB13 (general purpose I/O) |
| Pin 69 | PB14 — GPIO PB14 (general purpose I/O) |
| Pin 70 | PB15 — GPIO PB15 (general purpose I/O) |
| Pin 71 | VDDIO — I/O voltage supply |
| Pin 72 | GND — Ground |
| Pin 73 | PE0 — GPIO PE0 (general purpose I/O) |
| Pin 74 | PE1 — GPIO PE1 (general purpose I/O) |
| Pin 75 | PE2 — GPIO PE2 (general purpose I/O) |
| Pin 76 | PE3 — GPIO PE3 (general purpose I/O) |
| Pin 77 | PE4 — GPIO PE4 (general purpose I/O) |
| Pin 78 | PE5 — GPIO PE5 (general purpose I/O) |
| Pin 79 | PE6 — GPIO PE6 (general purpose I/O) |
| Pin 80 | PE7 — GPIO PE7 (general purpose I/O) |
| Pin 81 | PE8 — GPIO PE8 (general purpose I/O) |
| Pin 82 | PE9 — GPIO PE9 (general purpose I/O) |
| Pin 83 | PE10 — GPIO PE10 (general purpose I/O) |
| Pin 84 | PE11 — GPIO PE11 (general purpose I/O) |
| Pin 85 | PE12 — GPIO PE12 (general purpose I/O) |
| Pin 86 | PE13 — GPIO PE13 (general purpose I/O) |
| Pin 87 | PE14 — GPIO PE14 (general purpose I/O) |
| Pin 88 | PE15 — GPIO PE15 (general purpose I/O) |
| Pin 89 | PF0 — GPIO PF0 (general purpose I/O) |
| Pin 90 | PF1 — GPIO PF1 (general purpose I/O) |
| Pin 91 | PF2 — GPIO PF2 (general purpose I/O) |
| Pin 92 | PF3 — GPIO PF3 (general purpose I/O) |
| Pin 93 | PF4 — GPIO PF4 (general purpose I/O) |
| Pin 94 | PF5 — GPIO PF5 (general purpose I/O) |
| Pin 95 | PF6 — GPIO PF6 / XIN32 |
| Pin 96 | PF7 — GPIO PF7 / XOUT32 |
| Pin 97 | PF8 — GPIO PF8 (general purpose I/O) |
| Pin 98 | PF9 — GPIO PF9 (general purpose I/O) |
| Pin 99 | PF10 — GPIO PF10 (general purpose I/O) |
| Pin 100 | PF11 — GPIO PF11 (general purpose I/O) |
| Pin 101 | PG0 — GPIO PG0 (general purpose I/O) |
| Pin 102 | PG1 — GPIO PG1 (general purpose I/O) |
| Pin 103 | PG2 — GPIO PG2 (general purpose I/O) |
| Pin 104 | PG3 — GPIO PG3 (general purpose I/O) |
| Pin 105 | PG4 — GPIO PG4 (general purpose I/O) |
| Pin 106 | PG5 — GPIO PG5 (general purpose I/O) |
| Pin 107 | PG6 — GPIO PG6 (general purpose I/O) |
| Pin 108 | PG7 — GPIO PG7 (general purpose I/O) |
| Pin 109 | VDDIO — I/O voltage supply |
| Pin 110 | GND — Ground |
| Pin 111 | NRST — Reset input (active low) |
| Pin 112 | VSW — Internal DCDC switching node |
| Pin 113 | VDDC — Internal core voltage |
| Pin 114 | GND — Ground |
| Pin 115 | VDDANA — Analog voltage supply |
| Pin 116 | GNDANA — Analog ground |
| Pin 117 | AREFA — Analog reference A |
| Pin 118 | VREF — Voltage reference |
| Pin 119 | PA16 — GPIO PA16 (general purpose I/O) |
| Pin 120 | PA17 — GPIO PA17 (general purpose I/O) |
| Pin 121 | PA18 — GPIO PA18 (general purpose I/O) |
| Pin 122 | PA19 — GPIO PA19 (general purpose I/O) |
| Pin 123 | PA20 — GPIO PA20 (general purpose I/O) |
| Pin 124 | PA21 — GPIO PA21 (general purpose I/O) |
| Pin 125 | PA22 — GPIO PA22 (general purpose I/O) |
| Pin 126 | PA23 — GPIO PA23 (general purpose I/O) |
| Pin 127 | PA24 — GPIO PA24 (general purpose I/O) |
| Pin 128 | PA25 — GPIO PA25 (general purpose I/O) |
Typische Anwendungen
ATSAME54P20A-AUT ist geeignet für 6 Anwendungs: Industrial Motor Control & Drives, Automotive Body & Gateway ECUs, Industrial IoT Gateways, Building Automation Controllers, Audio DSP & Consumer Audio, Smart Grid Energy & Substation IEDs.
Industrial Motor Control & Drives
The ATSAME54P20A-AUT is well-suited to industrial motor control and drives because its 120 MHz Cortex-M4F core with DSP extensions executes Field-Oriented Control (FOC), Space-Vector Modulation (SVM), and Park transforms within a single control cycle. The integrated 12-bit 1 Msps ADC samples motor phase currents with simultaneous triggering via hardware TCC PWM, while the Cortex-M4F FFT/SVM instructions accelerate sensorless control estimators. The dual-panel Flash architecture (1 MB) lets the firmware support multiple motor profiles (BLDC, PMSM, ACI) with A/B bank OTA switching in deployed equipment, and the wide 1.62V-3.6V supply range tolerates industrial 24V-staged DC bus rails when paired with a regulated LDO. Unlike software-only FOCs on Cortex-M0/M3 parts, the SAME54's FPU eliminates FP-to-fixed conversion overhead and preserves cycle budget for comms or safety routines.
Empfohlen
Automotive Body & Gateway ECUs
The ATSAME54P20A-AUT brings automotive-grade temperature screening plus dual CAN-FD and 10/100 Ethernet MAC, making it a strong fit for body controllers and central gateway ECUs that bridge CAN/LIN buses with automotive Ethernet networks. The Cortex-M4F at 120 MHz can run OBD-II diagnostic stacks, UDS, and CAN-FD message routing concurrently with the hardware cryptographic accelerator handling secure onboard communication and firmware authentication. The 1 MB dual-panel Flash supports A/B partition OTA strategies mandated for SOTA-class functions, while 256 KB SRAM with ECC is sufficient for network buffers, UDS session memory, and AUTOSAR-like RTE stubs. The HS USB port can additionally serve as a debug or system test interface during ECU manufacturing.
Empfohlen
Industrial IoT Gateways
Industry 4.0 edge gateways benefit from the ATSAME54P20A-AUT's combination of dual CAN-FD (for factory-floor nodes), 10/100 Ethernet MAC (for uplink to MES/ERP), and HS USB (for local HMI peripherals). The 1 MB Flash runs MQTT, OPC-UA pub/sub, or BACnet stacks with TLS, while the AES/SHA hardware engine handles TLS handshake and certificate validation without halting the protocol stacks. The same Cortex-M4F can supervise local I/O via the 12-bit ADC and PWM out, eliminating a companion MCU in smaller gateway designs. The dual-panel Flash enables safe OTA from the gateway to downstream CAN nodes, and SEGGER + Harmony 3 ecosystem support provides tested MQTT-SN/CoAP libraries out of the box.
Empfohlen
Building Automation Controllers
Building automation controllers leverage the ATSAME54P20A-AUT's Ethernet MAC for BACnet/IP or Modbus TCP uplink while its SERCOM ports drive RS-485 buses for BACnet MS-TP or Modbus RTU field devices. The Cortex-M4F handles zone temperature-control loops, occupancy-driven HVAC scheduling, and lighting scenes at the same time, while the Event System synchronizes ADC sampling of temperature/humidity sensors with PWM output to damper actuators. The industrial temperature grade and wide 1.62-3.6V supply simplify wall-controller designs running directly off a 24V HVAC transformer rail. The 1 MB Flash holds full BACnet/Modbus profiles plus OTA-upgradeable firmware banks for serviceability over the 10-15 year building lifecycle.
Empfohlen
Audio DSP & Consumer Audio
The ATSAME54P20A-AUT's Cortex-M4F with DSP extensions can implement 48 kHz multi-band EQ, dynamic range compression, and biquad filters for active speakers and automotive headrest audio. The I2S peripheral streams 24-bit audio at high sampling rates while the FPU accelerates biquad and FIR kernels, and the rich DMA controller offloads buffer fills so the CPU budget stays available for control-panel and network features. USB HS enables direct USB audio class 2.0 streaming from a PC or phone, and SD/SDIO hosts a memory card for local playlist playback. The 256 KB SRAM holds several hundred ms of audio buffer for Bluetooth/Wi-Fi coprocessor handoff and lip-sync delay lines.
Empfohlen
Smart Grid Energy & Substation IEDs
The ATSAME54P20A-AUT serves smart-grid Intelligent Electronic Devices (IEDs) where its dual CAN-FD handles substation bus messaging, its 12-bit ADC reads CT/VT-derived analog inputs, and its Ethernet MAC publishes IEC 61850 GOOSE/SMV or DNP3 packets. The Cortex-M4F can run metering math (RMS, THD, demand) at high update rates, and the hardware AES-256 engine secures TLS-based remote firmware download and authenticated command logging demanded by IEC 62351. The wide 1.62-3.6V supply tolerates 24V substation battery rails and brown-out events; the 1 MB dual-panel Flash is divided between active metering code and a fail-safe bootloader that can revert to last-known-good image after an interrupted OTA.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATSAME54P20A-AUT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATSAME54P20A-AU | ATSAME54P20A-AFT | ATSAME54P20A-AF | ATSAME54P19A-AUT | ATSAME54N20A-AUT | ATSAME54N19A-AUT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-TQFP (14x14) | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same |
| Core | Cortex-M4F @ 120 MHz | Cortex-M4F @ 120 MHz - same | Cortex-M4F @ 120 MHz - same | Cortex-M4F @ 120 MHz - same | Cortex-M4F @ 120 MHz - same | Cortex-M4F @ 120 MHz - same | |
| Flash Memory | 1024 KB (Dual Panel) | 1024 KB (Dual Panel) - same | 512 KB (Dual Panel) - 50% less | 1024 KB - same | 512 KB - 50% less | ||
| SRAM | 256 KB (with ECC) | 256 KB - same | 256 KB - same | 256 KB - same | 256 KB - same | ||
| USB | USB 2.0 High-Speed with PHY | USB 2.0 HS - same | USB 2.0 Full-Speed (no HS PHY) | USB 2.0 Full-Speed (no HS PHY) | |||
| CAN-FD | 2 channels | 2 channels - same | 2 channels - same | 2 channels - same | |||
| Ethernet | 10/100 GMAC | 10/100 GMAC - same | 10/100 GMAC - same | 10/100 GMAC - same | |||
| Temperature Grade | Automotive (-AUT up to +85C) | Industrial (no automotive screening) | Industrial | Industrial tray-packing |
Wichtigste Unterscheidungsmerkmale
- Dual CAN-FD plus 10/100 Ethernet MAC in one Cortex-M4F MCU (vs. ATSAM3X8E (Atmel SAM3X ARM Cortex-M3))
- 1 MB dual-panel Flash with hardware crypto accelerator (vs. ATSAMD51P20A (lower-cost Cortex-M4F sibling))
- Industrial/automotive AEC-grade equivalent temperature screening (vs. ATSAME54P20A-AU (industrial only))
Designhinweise
The ATSAME54P20A-AUT requires three supply rails: VDDIN (main 1.62-3.6V), VDDIO (I/O driver supply), and VDDANA/VREF (analog supply for the ADC). Use a 3.3V LDO with 100 mA headroom and place 1uF/100nF decoupling pairs close to every VDD pin. Share VDDIO and VDDANA only when digital noise is low; otherwise use independent rails to maximize ADC SNR. Estimated: at 120 MHz with all peripherals enabled, the core can draw ~80 mA, so a low-noise LDO such as MCP1755 is recommended.
Route the GMAC MII/RMII traces as 50-ohm single-ended (MII) or 100-ohm differential pairs (RMII) on the top layer with a continuous ground reference below. Keep the 32.768 kHz crystal traces short and guarded by GND, and isolate the analog island around the ADC pins from digital switching return paths. The 128-TQFP allows inner-row signal escape for high-speed Ethernet pairs - follow the SAME54 Xplained Pro PCB layout as a starting reference.
Do not enable the high-speed USB PHY on the SAME54N variants (which lack the HS PHY); attempting HS enumeration will fail. Always tie the NRST pin through a 10 kohm pull-up and 100 nF cap to ground for clean reset behaviour. When using the dual-panel Flash for OTA, set FBTL (NVMCTRL) to swap banks atomically - failing to do so can leave the device with a half-written image and require a debugger to recover.
Estimated: at 120 MHz with 3.3V supply and full peripheral activity, junction-to-ambient thermal resistance for the 128-TQFP-14x14 package (no exposed pad) is approximately 50 C/W. Under normal ambient (<70C) the die stays within safe limits at full CPU load; for industrial 85C environments, derate CPU utilization or place a small bottom-side copper pour to provide additional heat spreading.
Compliance-Informationen
Microchip publishes RoHS and REACH declarations on its product page. The -AUT suffix denotes Microchip's automotive-grade screening (analogous to AEC-Q100 processes), but the device itself is not AEC-Q100 formally stamped; verify formal AEC-Q100 status from Microchip's product page if mandated by the application.