ATSAME70J21B-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
Teilenummer: ATSAME70J21B-AN ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $22.51 | $22,51 |
| 10 | $19.84 | $198,40 |
| 100 | $17.2 | $1.720,00 |
| 500 | $15.21 | $7.605,00 |
| 1.000 | $14.05 | $14.050,00 |
ATSAME70J21B-AN Übersicht
What is a Cortex-M7 microcontroller? A Cortex-M7 microcontroller is a 32-bit RISC processor core from Arm designed for high-performance embedded applications requiring DSP, single-precision/double-precision floating-point arithmetic, and deterministic interrupt response. The Cortex-M7 sits above Cortex-M4 in the Arm Cortex-M hierarchy and below Cortex-A application processors. Within the broader taxonomy, the ATSAME70J21B-AN belongs to the following chain: ARM Cortex-M7 -> 32-bit RISC microcontroller -> microcontroller unit (MCU) -> semiconductor. The SAM E70 family specifically targets motor control, industrial networking, audio, and graphical HMI designs where M7-class compute exceeds M4 capabilities.
Key features of the ATSAME70J21B-AN include a 16 KB instruction cache and 16 KB data cache with single-cycle access from flash through the tightly-coupled memory (TCM) interface, a single-precision hardware Floating Point Unit (FPU), DSP extensions, and a Memory Protection Unit (MPU). The peripheral set includes a high-speed USB 2.0 Full-Speed and High-Speed with on-chip PHY, a 10/100 Mbps Ethernet MAC with IEEE 1588 support, a CAN-FD controller, multiple USART/UART/SPI/TWI/I2S interfaces, a 12-bit ADC, and a 32-bit timer/counter block. The integrated quadrature decoder and PWM channels are tailored for field-oriented motor control loops.
The architecture combines a 6-layer bus matrix with dedicated peripheral DMA channels and an event system to support deterministic real-time performance. The dual-bank Flash with read-while-write (RWW) capability allows live firmware updates without halting application code, which is valuable for industrial field devices requiring in-service upgrades.
Typical applications include industrial motor drives (BLDC, PMSM, AC induction), factory automation controllers, building automation gateways, audio processing equipment, point-of-sale terminals, and high-end graphical HMI panels. The combination of Cortex-M7 DSP, Ethernet, USB, and CAN-FD makes it well-suited to connected industrial nodes.
When designing with this part, plan for proper decoupling: 100 nF on each VDD pin plus a 4.7 µF bulk capacitor. The 64-pin LQFP exposes fewer peripherals than the larger 144-pin variants, so confirm the specific peripheral mix against the pinout table before selecting the package.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application notes, and engineering design guidance not consolidated on a single manufacturer page.
Drop-in-Alternativen für ATSAME70J21B-AN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAME70J21B-AN (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Ethernet, Mounting Type, Package, CAN.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ATSAME70J20B-AN
✅ Drop-In✓ Auf Lager
$12.75 / Stück
Datenblatt ansehen →ATSAME70J19B-AN
✅ Drop-In✓ Auf Lager
$9.42 / Stück
Datenblatt ansehen →ATSAME70J21A-ANT
✅ Drop-In✓ Auf Lager
$9.6 / Stück
Datenblatt ansehen →ATSAME70J19A-ANT
✅ Drop-In✓ Auf Lager
$9.2 / Stück
Datenblatt ansehen →ATSAME70Q21B-AN
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$17.4 / Stück
Datenblatt ansehen →ATSAME70J21B-AN Grenzwerte & elektrische Eigenschaften
| Core Architecture | ARM Cortex-M7 with FPU |
| Operating Frequency | 300 MHz (max) |
| Program Memory | 2 MB (2M x 8) Flash |
| SRAM | 384 KB |
| Versorgungsspannung | 1.62 V to 3.6 V |
| Gehäuse | 64-pin LQFP (10x10 mm) |
| Betriebstemperatur | -40 C to +105 C (industrial) |
| Cache | 16 KB I-cache + 16 KB D-cache |
| FPU | Single-precision hardware FPU |
| DSP Extensions | Yes (Arm SIMD) |
| MPU | Yes |
| USB | USB 2.0 High-Speed with on-chip PHY |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 |
| CAN | CAN-FD controller |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| Moisture Sensitivity Level | MSL 3 (per JEDEC J-STD-020) |
ATSAME70J21B-AN 64-pin lqfp (10x10 mm) Pinbelegungsleitfaden
Pinbelegung für ATSAME70J21B-AN (64-pin lqfp (10x10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATSAME70J21B-AN.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATSAME70J21B-AN ist geeignet für 6 Anwendungs: Industrial Motor Control (BLDC / PMSM / AC Induction), Industrial Ethernet Gateways (EtherCAT / PROFINET / Modbus TCP), Audio Processing and DSP Applications, High-Speed USB Peripherals and Test Equipment, Automotive Body and Chassis ECUs, Graphical HMI Panels and Smart Appliances.
Industrial Motor Control (BLDC / PMSM / AC Induction)
The ATSAME70J21B-AN is well-suited to field-oriented control (FOC) loops for BLDC, PMSM, and AC induction motors because its 300 MHz Cortex-M7 core with hardware single-precision FPU executes the Park/Clarke transforms and PI controllers well within the typical 10 to 20 kHz PWM cycle. The 384 KB SRAM, configurable as tightly-coupled memory (TCM), delivers single-cycle access for the control loop, eliminating cache miss jitter that would otherwise distort the current waveform. With the integrated PWM channels, quadrature decoder, and 12-bit ADC capable of sub-microsecond sampling, the device closes the current loop with deterministic latency. Designers pair this MCU with gate drivers such as the MCP8024 and a three-phase IGBT or MOSFET inverter for a complete 1 kW class drive.
Empfohlen
Industrial Ethernet Gateways (EtherCAT / PROFINET / Modbus TCP)
The ATSAME70J21B-AN's integrated 10/100 Mbps Ethernet MAC with IEEE 1588 hardware timestamping supports industrial Ethernet protocols including EtherCAT, PROFINET, and Modbus TCP. The Cortex-M7's 300 MHz performance is sufficient to run a TCP/IP stack plus an application layer simultaneously, while the 2 MB Flash stores the full protocol stack, web server, and application code without external memory expansion. The MPU enables isolation between the network stack and the application task, improving security and reliability. Designers typically add an external Ethernet PHY (such as a KSZ8081) connected via RMII and an RJ45 with integrated magnetics.
Empfohlen
Audio Processing and DSP Applications
The Cortex-M7 core's DSP extensions and single-precision hardware FPU enable real-time audio processing at sample rates up to 48 kHz with headroom for FIR filters, FFT analysis, and noise reduction. The I2S interface connects directly to audio codecs such as the SGTL5000 for stereo line-in/line-out plus headphone drive. The 2 MB Flash accommodates audio processing libraries, codecs, and lookup tables without external memory. The 384 KB SRAM provides working memory for audio buffers and DSP coefficient storage. This makes the ATSAME70J21B-AN a strong fit for professional audio equipment, hearing aids, and speech recognition front-ends.
Empfohlen
High-Speed USB Peripherals and Test Equipment
The ATSAME70J21B-AN integrates a USB 2.0 High-Speed controller with on-chip PHY, eliminating the need for an external transceiver and enabling 480 Mbps data transfer for USB peripherals such as data loggers, oscilloscopes, and industrial cameras. The Cortex-M7 core buffers high-speed data into the 384 KB SRAM, and the 2 MB Flash supports USB stack plus application firmware. The device's high throughput is also valuable for data acquisition systems streaming ADC samples to a host PC. Designers pair the part with USB Type-C connector and ESD protection for a complete USB peripheral.
Empfohlen
Automotive Body and Chassis ECUs
The ATSAME70J21B-AN's CAN-FD controller supports modern automotive networks at up to 5 Mbps, and its Cortex-M7 DSP capability enables sensor fusion and signal conditioning for body control modules. The wide operating temperature range of -40 C to +105 C suits under-hood and chassis applications. The 64-LQFP package fits space-constrained ECU housings, and the 2 MB Flash supports AUTOSAR or custom real-time operating systems. Designers add external CAN transceivers (such as the MCP2562FD) and LIN transceivers for body networks. For AEC-Q100 qualified variants, Microchip offers automotive-grade equivalents in the SAM E70 family.
Empfohlen
Graphical HMI Panels and Smart Appliances
The ATSAME70J21B-AN's 300 MHz Cortex-M7 with 2 MB Flash drives graphical user interfaces for HMI panels, appliance control boards, and building automation touchscreens. The device can render simple graphical elements and run LVGL or emWin without an external graphics controller. The USB and Ethernet connectivity support remote firmware update and cloud telemetry, while the 12-bit ADC reads touch panel and sensor inputs. The 64-LQFP package balances peripheral count with compact PCB area, ideal for 3.5-inch to 5-inch touch panel designs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATSAME70J21B-AN – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATSAME70J20B-AN | ATSAME70J19B-AN | ATSAME70J21A-ANT | ATSAME70J19A-ANT | ATSAME70Q21B-AN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Core | ARM Cortex-M7 @ 300 MHz | ARM Cortex-M7 @ 300 MHz | ARM Cortex-M7 @ 300 MHz | ARM Cortex-M7 @ 300 MHz | ARM Cortex-M7 @ 300 MHz | ARM Cortex-M7 @ 300 MHz |
| Flash | 2 MB | 1 MB | 512 KB | 2 MB | 512 KB | 2 MB |
| SRAM | 384 KB | 384 KB | 256 KB | 384 KB | 256 KB | 384 KB |
| Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Ethernet MAC | 10/100 Mbps + IEEE 1588 | 10/100 Mbps + IEEE 1588 | 10/100 Mbps + IEEE 1588 | 10/100 Mbps + IEEE 1588 | 10/100 Mbps + IEEE 1588 | 10/100 Mbps + IEEE 1588 |
| USB | USB 2.0 HS + PHY | USB 2.0 HS + PHY | USB 2.0 HS + PHY | USB 2.0 HS + PHY | USB 2.0 HS + PHY | USB 2.0 HS + PHY |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +85 C |
Wichtigste Unterscheidungsmerkmale
- Largest Flash in 64-LQFP footprint within SAM E70 family (vs. ATSAME70J20B-AN)
- Dual-bank Flash with read-while-write (RWW) (vs. ATSAM4S16C (Cortex-M4))
- On-chip USB 2.0 High-Speed PHY and Ethernet MAC (vs. ATSAMD51 family)
Designhinweise
Place a 100 nF decoupling capacitor on each VDD pin and a single 4.7 µF bulk capacitor near the MCU. The ATSAME70J21B-AN has separate VDDCORE and VDDIO pins; VDDCORE requires a 1.2 V regulator while VDDIO accepts 1.62 V to 3.6 V. Per the SAM E70 family datasheet, VDDCORE must be established before or simultaneously with VDDIO to avoid latch-up. Use a power management IC such as the MCP16502 to sequence the rails correctly.
Route the 64-LQFP package on a 4-layer PCB with continuous ground plane beneath the device. The LQFP has 0.5 mm pitch; use 0.20 mm traces and 0.10 mm clearance on the inner layers. For Ethernet, route RMII traces with matched lengths within 50 mils and keep them away from switching nodes. The USB DP/DM traces should be 90 ohm differential with no splits, and the on-chip PHY requires a precise 12 kHz external reference resistor on the XIN32KSO pin.
Do not assume the 64-LQFP variant exposes the same peripheral set as the 144-LQFP variants. The smaller package omits several I/O lines and peripheral instances; consult the pin multiplexing table in section 7 of the datasheet before designing the schematic. Also, the flash wait state must be configured per the formula in the datasheet for the chosen VDDCORE voltage to avoid instruction fetch failures above 150 MHz.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. Lead-free reflow profile per JEDEC J-STD-020 MSL 3. AEC-Q100 not qualified for this industrial-grade part — Microchip offers automotive-graded SAM E70 variants separately. Halogen-free status not explicitly stated in provided data.
