ATXMEGA16A4U-MH - 32MHz 16KB Flash MCU | Microchip
Teilenummer: ATXMEGA16A4U-MH ✓ AktivATXMEGA16A4U-MH Übersicht
An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The AVR XMEGA family belongs to the broader embedded-controller hierarchy, using a Harvard-style RISC architecture designed to execute instructions efficiently while balancing processing performance, low-power operation, and peripheral integration. The ATXMEGA16A4U-MH is intended for compact embedded systems that require more event handling and data-transfer flexibility than a basic 8-bit MCU provides.
The principal features include 32 KB self-programming Flash, a dedicated 4 KB boot-code section, 2 KB SRAM, and 1 KB EEPROM. A 4-channel DMA controller can move data between peripherals and memory while reducing CPU intervention, while the 8-channel event system can connect timer, comparator, and other peripheral events. Up to 32 GPIO functions are associated with the device family, making it suitable for control, communication, and mixed-signal interface applications.
The AVR enhanced RISC architecture provides up to 32 MIPS at a 32 MHz clock according to the manufacturer datasheet. Separate programming and data memories give deterministic access to code and working data. Self-programming Flash permits field-update workflows when the application includes a valid bootloader and appropriate firmware protection. The A4U device also integrates communication and timing resources suitable for connected industrial, consumer, and embedded-control products.
Typical uses include low-power sensor nodes, compact motor and actuator controllers, industrial interface modules, USB-enabled human-interface equipment, and embedded control boards requiring DMA or event-driven peripherals. The 7 x 7 mm VQFN land pattern supports compact designs, while its exposed-pad construction requires careful thermal and PCB-layout treatment. The A4U family is also a natural choice when firmware needs deterministic event routing and efficient peripheral transfers without a higher-memory MCU.
For PCB implementation, place the decoupling network at the supply pins and preserve the exposed pad's thermal and electrical continuity with a solderable copper area. Confirm that the production PCB footprint matches the 44-pin VQFN arrangement, exposed-pad dimensions, and paste mask before layout release. Programmers and debuggers must also be checked for compatibility with the selected AVR XMEGA device and selected operating voltage.
This page organizes the core memory, timing, package, and peripheral characteristics into a practical selection reference. It also identifies same-package XMEGA family alternatives, highlights memory-density differences, and provides design guidance for PCB layout, firmware migration, and feature-based replacement decisions.
Drop-in-Alternativen für ATXMEGA16A4U-MH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATXMEGA16A4U-MH (gleiche Bauform und Footprint) – abweichend in EEPROM, Package, External Bus Interface, Product Type, SRAM.
ATXMEGA16A4-MH
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ATXMEGA32A4U-MH
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATXMEGA64A4U-MH
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ATXMEGA128A4U-MH
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATXMEGA16A4U-MH Grenzwerte & elektrische Eigenschaften
| Product Type | 8/16-bit RISC microcontroller |
| Series | AVR XMEGA A4U |
| Maximale Taktfrequenz | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| CPU Architecture | AVR enhanced RISC |
| Maximum Throughput | Up to 32 MIPS at 32 MHz |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| External Bus Interface | 1 interface |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Gehäuse | 44-pin VQFN, 7 x 7 mm |
| Montageart | Surface mount |
| Program Memory Type | Self-programming Flash |
| Number of GPIO | Up to 32 |
ATXMEGA16A4U-MH 44-pin vqfn, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für ATXMEGA16A4U-MH (44-pin vqfn, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATXMEGA16A4U-MH.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATXMEGA16A4U-MH ist geeignet für 6 Anwendungs: Industrial Sensor Interface, Low-Power Sensor Node, Motor and Actuator Control, USB Human-Interface Device, Communication Interface Module, Embedded Control and Monitoring.
Industrial Sensor Interface
The ATXMEGA16A4U-MH fits compact sensor interfaces that must collect measurements, coordinate peripheral events, and update local control logic without a higher-memory processor. Its 32 MHz AVR enhanced RISC core can execute up to 32 MIPS, while the 4-channel DMA controller transfers peripheral data with less CPU involvement. The 8-channel event system can connect timer, comparator, and communication events, reducing polling delays. Its 16 KB Flash, 2 KB SRAM, and 1 KB EEPROM provide separate space for code, working data, and configuration retention. In a 1.8 V, 2.5 V, or 3.3 V industrial module, the 7 x 7 mm VQFN package preserves board area, while the exposed pad must be connected to a thermal and ground copper plane.
Low-Power Sensor Node
The ATXMEGA16A4U-MH is appropriate for a compact, battery-conscious sensor node that periodically samples inputs and communicates processed results. The low-power XMEGA architecture supports sleep-based firmware designs, while the 32 MHz operating point provides enough performance for filtering, protocol handling, and local calculations between wake events. Its 2 KB SRAM supports buffered measurements, and 1 KB EEPROM can retain configuration or calibration information. The 4-channel DMA controller is useful when transferring sampled data from timers or serial peripherals. Developers should select the voltage range and clock configuration that suit the power budget, and verify actual sleep and active current under their intended operating conditions.
Motor and Actuator Control
The ATXMEGA16A4U-MH can serve as the local controller for a motor, solenoid, valve, or multi-axis actuator module. Its event system allows timer outputs, comparator events, and external interrupts to interact without continuous software polling, while the 4-channel DMA controller supports efficient movement of control and status data. The 32 MHz AVR core provides deterministic response for loop control and protection sequencing, and the 16 KB Flash accommodates a compact control algorithm plus fault handling. The 44-pin VQFN land pattern allows integration into a compact drive board, although exposed-pad layout, thermal copper, output-driver isolation, and motor-supply grounding remain essential design considerations.
USB Human-Interface Device
The ATXMEGA16A4U-MH is suitable for compact USB human-interface equipment where local key scanning, indicator control, and protocol handling must fit into a small board. The 32 MHz CPU throughput supports protocol tasks and application logic, and the separate 2 KB SRAM can hold transmit and receive buffers. The event system can connect keyboard, button, or timer events, reducing the need for continuous scanning. A compact 7 x 7 mm VQFN package also helps meet enclosure constraints. Firmware designers should reserve the 4 KB boot-code section if bootloader-based field updates are required, verify USB signal-routing constraints, and confirm that the selected connector and protection scheme do not compromise high-speed signal integrity.
Communication Interface Module
The ATXMEGA16A4U-MH fits a small serial or network interface module that must manage framing, buffering, status reporting, and local configuration. The AVR enhanced RISC architecture can execute up to 32 MIPS at 32 MHz, while the 4-channel DMA controller reduces processor intervention during serial, timer, or peripheral transfers. The 8-channel event system supports precise triggering among communication and timing functions. Its 16 KB Flash is adequate for a focused interface application, and 2 KB SRAM provides working space for packet handling. Because the device can operate at 1.8 V, 2.5 V, or 3.3 V, it can align with different transceiver ecosystems, provided the logic levels and signal-integrity requirements are matched.
Embedded Control and Monitoring
The ATXMEGA16A4U-MH is appropriate for a local control-and-monitoring board combining digital inputs, timers, analog comparison functions, and serial diagnostics. Its 32 MHz performance allows responsive control logic, while the event system can trigger actions directly from peripheral events and the DMA controller can move status data independently of the main instruction stream. Memory partitioning supports a compact application in 16 KB Flash, 2 KB SRAM, and 1 KB EEPROM, including retained operating parameters. The 44-pin VQFN package reduces board footprint, but production designs must follow the manufacturer land pattern and preserve the exposed-pad connection for both thermal performance and electrical return-path integrity.
Technische Referenzdaten für ATXMEGA16A4U-MH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATXMEGA16A4-MH | ATXMEGA32A4U-MH | ATXMEGA64A4U-MH | ATXMEGA128A4U-MH |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) |
| Series | AVR XMEGA A4U | AVR XMEGA A4 | AVR XMEGA A4U | AVR XMEGA A4U | AVR XMEGA A4U |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 4 KB | 8 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 2 KB | 4 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V |
Wichtigste Unterscheidungsmerkmale
- Event-driven control with four-channel DMA (vs. ATXMEGA16A4-MH)
- Compact 16 KB XMEGA A4U configuration (vs. ATXMEGA64A4U-MH)
- Direct A4U family path for memory growth (vs. ATXMEGA32A4U-MH)
- Four times the code storage of the target (vs. ATXMEGA128A4U-MH)
Designhinweise
Use the manufacturer package drawing to define the 44-pin VQFN land pattern, including the exposed pad and its thermal-via requirements. The ATXMEGA16A4U-MH is only 7 x 7 mm, so pad and clearance tolerances should be checked against the production PCB process. Place input capacitors adjacent to the supply pins and route them through a short return path. Avoid adding arbitrary solder-mask or paste-mask modifications without reviewing the manufacturer footprint and assembly capability.
Treat the exposed pad as both a thermal path and a package-defined electrical connection. Provide a solderable copper area beneath the device, add thermal vias according to the package guidance, and connect the pad to the same ground reference used by the decoupling network. Exact junction temperature depends on clock rate, switching activity, supply voltage, ambient temperature, and board copper, so evaluate the finished assembly rather than relying on the package name alone.
Select 1.8 V, 2.5 V, or 3.3 V operation according to the peripheral ecosystem and configure the firmware and fuse settings consistently with that rail. Place bulk and high-frequency decoupling near the power and ground pins, and keep switching supplies or motor drivers physically separated from sensitive analog and communication traces. Verify startup, brownout, and peripheral behavior across the full voltage range used in the product.
Do not treat a matching VQFN outline as sufficient proof of interchangeability. Before replacing the ATXMEGA16A4U-MH, compare pin functions, exposed-pad geometry, operating voltage, peripheral configuration, clock limits, bootloader layout, and device-specific errata. When moving to a higher-memory XMEGA variant, also account for changes in SRAM and EEPROM capacity, interrupt vectors, linker-memory planning, and programming-tool device support.
Compliance-Informationen
The product is an industrial and commercial microcontroller rather than an automotive-qualified device. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.