BAT165E6327HTSA1 - 40V 750mA Schottky Diode | Infineon
Teilenummer: BAT165E6327HTSA1 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
BAT165E6327HTSA1 Übersicht
A Schottky diode is a semiconductor rectifier whose junction is formed without a conventional forward-diffusion region, producing a lower forward-voltage drop and faster switching than a comparable silicon p-n rectifier. In the broader electronics hierarchy, this device is a discrete diode, specifically a small-signal Schottky rectifier used in signal conditioning, power paths, and protection networks.
The verified product data identifies a 750 mA forward-current rating, a 40 V reverse-voltage rating, and a PG-SOD323-3D surface-mount package. The manufacturer describes the BAT165 family as suitable for low-loss and fast-recovery requirements. The package keeps the device compact while supporting automated surface-mount assembly and PCB integration in consumer, industrial, and communication equipment.
BAT165E6327HTSA1 is suited to meter-protection circuits, bias isolation, signal-line clamping, and low-loss rectification. These applications benefit from rapid recovery when the diode must switch quickly between conducting and nonconducting states. The 40 V rating provides reverse-bias headroom for low-voltage signal rails, while the 750 mA rating supports moderate rectifier current rather than high-power switching duties.
Designers should verify the exact electrical limits and thermal derating in the Infineon BAT165 datasheet before finalizing a PCB. Pay particular attention to forward-voltage behavior at the actual load current, package footprint orientation, copper heat-spreading area, and the maximum repetitive peak forward current. This page consolidates verified manufacturer and distributor information and clearly distinguishes specifications that were not supplied in the available data.
BAT165E6327HTSA1 is also identified as Pb-free and RoHS compliant, with qualification according to AEC-Q101 in the supplied technical data. The Infineon BAT165 family and the available distributor listings provide the primary references for ordering, lifecycle review, and replacement assessment.
Drop-in-Alternativen für BAT165E6327HTSA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
BAT165E6327
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
BAT165E6327HTSA1 Grenzwerte & elektrische Eigenschaften
| Device Type | Medium-power AF Schottky diode |
| Forward Current | 750 mA |
| Reverse Voltage | 40 V |
| Gehäuse | PG-SOD323-3D |
| Montageart | Surface mount |
| Forward Voltage at 500 mA | 700 mV |
| RoHS-Status | Compliant |
| Lead-Free Status | Pb-free |
| Automotive Qualification | Qualified according to AEC-Q101 |
| Package Family | SOD-323 small-signal diode package |
| Diode Category | Schottky rectifier |
BAT165E6327HTSA1 sod-323 small-signal diode package Pinbelegungsleitfaden
Pinbelegung für BAT165E6327HTSA1 (sod-323 small-signal diode package-Gehäuse). Dieses Leistungsbauteil verfügt über Gate-, Drain- und Source-Anschlüsse. Bei nicht gepolten Gehäusen entnehmen Sie die genaue Ausrichtung von Pin 1 und Footprint-Details dem Herstellerdatenblatt. Typische Anwendungen sind Netzteilentwurf, Motoransteuerung und Lastschaltung.
Keine detaillierten Pinbelegungsdaten verfügbar für BAT165E6327HTSA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
BAT165E6327HTSA1 ist geeignet für 6 Anwendungs: Meter Protection, Bias Isolation, Low-Voltage Clamping, Signal Rectification, Power-Supply Rectification, Automotive Bias and Protection Circuits.
Meter Protection
BAT165E6327HTSA1 is suitable for protection in meter-related signal paths where a low-loss, fast-recovery rectifier is needed. The verified Infineon data identifies meter protection as an intended application and specifies a 40 V reverse-voltage rating, which provides useful headroom for low-voltage measurement circuits. The 750 mA forward-current capability covers moderate rectified loads, while the Schottky junction helps minimize conduction loss. The circuit designer should still verify pulse current, recovery behavior, and thermal stress against the official datasheet.
Empfohlen
Bias Isolation
Use BAT165E6327HTSA1 in bias-isolation networks where a small-signal Schottky diode can separate bias paths while maintaining low forward loss. Its 750 mA rating is more than a basic leakage-level application normally requires, and the 40 V reverse rating supports moderate low-voltage bias rails. The PG-SOD323-3D footprint helps preserve PCB area in compact analog or control boards. Verify the required forward voltage at the actual bias current and confirm that the diode's recovery behavior does not disturb timing-sensitive bias paths.
Empfohlen
Low-Voltage Clamping
BAT165E6327HTSA1 can be considered for low-voltage clamping functions because the manufacturer identifies clamping as an intended use and specifies a 40 V reverse-voltage rating. Schottky conduction can provide low-loss current transfer and rapid recovery in suitable protection networks. The design must account for clamp-node voltage, forward-current demand, pulse duration, and the thermal limits of the PG-SOD323-3D package. The available data does not provide a complete transient model, so circuit simulation and datasheet verification remain necessary.
Empfohlen
Signal Rectification
BAT165E6327HTSA1 is appropriate for signal rectification in compact surface-mount circuits that need a 40 V reverse-voltage device and up to 750 mA forward current. The low-loss Schottky behavior helps preserve signal amplitude compared with a rectifier selected only for generic silicon-diode use. In a precision signal path, check forward voltage at the actual operating current, leakage, capacitance, and switching speed. The PG-SOD323-3D package simplifies assembly but requires attention to copper area and thermal derating.
Empfohlen
Power-Supply Rectification
BAT165E6327HTSA1 can serve in low-power rectification stages where the 750 mA rating and 40 V reverse-voltage specification match the load and rail requirements. Its Schottky construction is useful for reducing conduction loss relative to a standard diode in suitable topologies. It is not a universal replacement for a power rectifier: verify average current, repetitive peak current, junction temperature, and thermal derating in the datasheet. Keep copper paths short and provide adequate local decoupling and heat-spreading copper.
Empfohlen
Automotive Bias and Protection Circuits
The supplied technical data reports that BAT165E6327HTSA1 is Pb-free, RoHS compliant, and qualified according to AEC-Q101, making it a candidate for qualified automotive bias or protection functions. The 40 V reverse rating and 750 mA forward-current rating support moderate low-voltage circuit requirements. Automotive design release still requires checking the exact qualification scope, transient environment, load profile, and production documentation. The compact PG-SOD323-3D package supports PCB density while requiring controlled assembly and thermal design.
Empfohlen
Technische Referenzdaten für BAT165E6327HTSA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | BAT165E6327 |
|---|---|---|
| Device Type | Medium-power AF Schottky diode | Small-signal Schottky diode |
| Forward Current | 750 mA | 500 mA |
| Reverse Voltage | 40 V | 40 V |
| Forward Voltage | 700 mV at 500 mA | 700 mV; comparison result does not provide the complete test condition |
| Package | PG-SOD323-3D | Related BAT165 package; exact package drawing must be confirmed |
| Brand | Infineon | Infineon |
| Application Intent | Low-loss, fast-recovery, meter protection, bias isolation, clamping | Related BAT165 function; circuit-structure differences reported |
Wichtigste Unterscheidungsmerkmale
- Higher verified forward-current rating than the related BAT165E6327 listing (vs. BAT165E6327)
- Same broad low-voltage Schottky application class (vs. BAT165E6327)
- Automotive qualification information is available for the target (vs. BAT165E6327)
Designhinweise
Use BAT165E6327HTSA1 only after checking the forward-voltage curve at the actual operating current. The verified data specifies 700 mV at 500 mA, but that condition must not be generalized to every current or temperature. Confirm repetitive peak current, average current, and thermal derating in the official Infineon datasheet. For a low-loss rectifier, conduction loss and junction temperature should be evaluated together rather than relying on the 750 mA forward-current rating alone.
The PG-SOD323-3D package is compact, so PCB copper area and ambient temperature materially affect safe operating current. Place the diode where heat can spread into the board or other intentional copper features, and follow the manufacturer thermal-resistance and derating information. The supplied excerpts do not provide thermal resistance, power dissipation, or operating-temperature limits, so no numerical heat calculation is asserted here. Validate the hottest expected load condition before production release.
Confirm the exact cathode orientation and land pattern from the official BAT165 datasheet before layout because related BAT165 ordering codes may represent different package structures. Keep the rectifier close to the protected or biased node to minimize trace resistance and parasitic inductance. Respect the manufacturer paste and copper recommendations for the PG-SOD323-3D package, and inspect polarity after reflow. Do not substitute a similarly named BAT165 code solely from the distributor title.
Do not treat BAT165E6327 as an automatic drop-in replacement for BAT165E6327HTSA1. The available comparison result reports 500 mA versus 750 mA forward current and warns that the circuit structure may be modified. Verify package drawing, terminal polarity, forward-voltage limits, recovery behavior, and qualification before substitution. Likewise, do not assume that a 40 V reverse rating covers unclamped automotive transients; include appropriate circuit protection and check the application voltage envelope.
Compliance-Informationen
The supplied technical data states Pb-free, RoHS compliant, and qualified according to AEC-Q101 for BAT165E6327HTSA1. The compliance field aec_q100 is not_applicable because the verified wording names AEC-Q101 rather than AEC-Q100; REACH, halogen-free status, and conflict-minerals information were not provided.
