BCM6715B0KFFBG - Wi-Fi 6/6E 4x4 802.11ax SoC | Broadcom
Teilenummer: BCM6715B0KFFBG ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $22.86 | $22,86 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
BCM6715B0KFFBG Übersicht
A Wi-Fi SoC integrates the media access controller (MAC), baseband physical layer (PHY), and radio transceiver on a single die, replacing the multi-chip solutions historically used in wireless LAN infrastructure. Within the network silicon hierarchy, the BCM6715 sits at the access-point main-SoC level, above front-end modules and below cloud management platforms, forming the complete RF signal chain together with power amplifiers, switches, and filters.
Key capabilities include simultaneous tri-band operation, full 4x4 Multiple-Input Multiple-Output (MIMO) radio architecture, and 160 MHz channel support that enables multi-gigabit PHY rates under the Wi-Fi 6/6E (802.11ax) standard. Release 2 (Version 2) features add Enhanced Long Range (Wi-Fi 6 R2) functionality for improved uplink and coverage in dense residential environments.
The device targets residential wireless access points, mesh Wi-Fi systems, and gateway routers that must serve high client density across the newly opened 6 GHz band. Broadcom positions the BCM6715 as the flagship 4x4 AP chip for premium tri-band home networking platforms.
Designers should plan power delivery, thermal spreading via the BGA package land pattern, and RF front-end matching per Broadcom reference designs; full electrical and register-level documentation is distributed under NDA through Broadcom docSAFE rather than a public datasheet.
Note: Broadcom does not publish a public datasheet for this part; detailed parameters (power consumption, interface details, supply voltages) require an NDA, so several fields on this page are marked as data-needed pending verification.
This page synthesizes distributor pricing and availability (LCSC, Octopart, JLCPCB), category context, and practical sourcing guidance not available in any single public source.
Drop-in-Alternativen für BCM6715B0KFFBG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernBCM6715B0KFFBG Grenzwerte & elektrische Eigenschaften
| Product Type | Wi-Fi MAC/PHY/Radio System-on-Chip (SoC) |
| Wireless Standard | IEEE 802.11ax Release 2 (Wi-Fi 6/6E) |
| Radio Configuration | 4x4 MIMO |
| Operating Bands | 2.4 GHz, 5 GHz, 6 GHz (selectable) |
| Maximum Channel Bandwidth | 160 MHz |
| Standard Family | Wi-Fi 6 / Wi-Fi 6E |
| Application Segment | Residential access points (AP) |
| Montageart | Surface Mount (BGA) |
BCM6715B0KFFBG standard Pinbelegungsleitfaden
Pinbelegung für BCM6715B0KFFBG (standard-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für BCM6715B0KFFBG.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
BCM6715B0KFFBG ist geeignet für 6 Anwendungs: Tri-Band Residential Wi-Fi 6E Access Points, Whole-Home Mesh Wi-Fi Systems, Residential Gateway Routers, High-Density Multi-Client Smart Home Hubs, Wi-Fi 6/6E Test Platforms and Reference Designs, Small Office and SOHO Wireless Infrastructure.
Tri-Band Residential Wi-Fi 6E Access Points
The BCM6715B0KFFBG is purpose-built as the main SoC of premium tri-band residential access points. Its selective 2.4 GHz, 5 GHz, and 6 GHz operation lets one chip serve legacy clients, high-throughput 5 GHz clients, and interference-free Wi-Fi 6E 6 GHz clients simultaneously, while the 160 MHz maximum channel bandwidth unlocks multi-gigabit PHY rates on the 6 GHz band. In a typical AP platform the SoC drives a 4x4 antenna array through external front-end modules, delivering four spatial streams per band. Placing MAC, PHY, and radio on one die reduces BOM count and inter-chip latency compared to two-chip radio+CPU architectures, and Release 2 features such as Enhanced Long Range improve uplink performance at range. Thermal design must spread SoC dissipation through the BGA land pattern into the enclosure.
Empfohlen
Whole-Home Mesh Wi-Fi Systems
Mesh Wi-Fi nodes benefit directly from the BCM6715's tri-band capability: the 6 GHz band can be dedicated to wireless backhaul between nodes while 2.4 GHz and 5 GHz serve client devices, avoiding the backhaul-versus-client contention that degrades dual-band mesh systems. The 4x4 MIMO radio and 160 MHz channel support provide the raw backhaul capacity to sustain multi-gigabit fiber-class internet plans across multiple hops. Broadcom's Release 2 (Version 2) feature set, including Enhanced Long Range, strengthens the uplink between distant nodes, which is usually the bottleneck in multi-story homes. Designers pair the SoC with high-gain internal antennas and front-end modules, and should verify node-to-node throughput with 160 MHz backhaul channels reserved exclusively for mesh links to achieve the quoted PHY rates in real deployments.
Empfohlen
Residential Gateway Routers
For ISP-provided and retail residential gateways, the BCM6715B0KFFBG supplies the Wi-Fi 6/6E radio subsystem that terminates the WAN connection wirelessly for client devices. Its 4x4 802.11ax Release 2 architecture supports the high client counts typical of modern smart homes, and single-die MAC/PHY/radio integration simplifies board design inside compact gateway enclosures. The 160 MHz channel support allows the router to fully exploit the 6 GHz spectrum opened for unlicensed use, delivering multi-gigabit throughput that matches multi-gig WAN services. In gateway designs the SoC connects to the host networking processor over the platform's standard interface, and designers must allocate RF keep-out areas and matched antenna feed lines per Broadcom reference layouts. Compliance with regional 6 GHz power rules (AFC where required) must be handled in firmware configuration.
Empfohlen
High-Density Multi-Client Smart Home Hubs
Smart homes now routinely host dozens of Wi-Fi clients - cameras, speakers, appliances, and phones - creating uplink-heavy, high-density airtime contention. The BCM6715B0KFFBG addresses this with OFDMA (inherent to its 802.11ax base) and four spatial streams, scheduling small packets for many low-rate IoT clients concurrently while reserving 160 MHz 6 GHz bandwidth for high-throughput devices such as 8K streaming boxes. Wi-Fi 6 Release 2 Enhanced Long Range improves connectivity for battery IoT devices at the edge of coverage, reducing dead-zone complaints. Its tri-band selectivity lets the hub steer legacy 2.4 GHz IoT traffic onto a clean band away from 5 GHz video streams. Engineers should size the hub's power supply for peak 4x4 TX currents and validate antenna placement to keep IoT-range and 6 GHz-throughput objectives simultaneously satisfied.
Empfohlen
Wi-Fi 6/6E Test Platforms and Reference Designs
The BCM6715B0KFFBG serves as the device-under-test or reference platform silicon for Wi-Fi 6/6E protocol testing, PHY-rate validation, and RF characterization of 6 GHz band products. Its support of 160 MHz channels and Release 2 features makes it a representative benchmark for tri-band 4x4 performance claims, and Broadcom provides reference design documentation through its NDA channel to enable board bring-up. Test engineers use the platform to measure EVM across modulation and coding schemes, verify OFDMA scheduling behavior, and perform regulatory pre-scan of 6 GHz emissions. Because full register-level documentation is NDA-controlled, test teams should engage Broadcom's docSAFE portal early in project planning. The BGA package requires a rework-capable test board with adequate ball-level access for RF probing and current profiling under TX burst loads.
Empfohlen
Small Office and SOHO Wireless Infrastructure
Small office and SOHO access points need near-enterprise throughput at residential cost points, which is exactly the segment Broadcom targets with the BCM6715. A single 4x4 Wi-Fi 6E SoC can serve an office of 30-50 clients with OFDMA airtime scheduling and 160 MHz 6 GHz channels for workstations, while 2.4/5 GHz bands carry legacy and guest traffic. Compared with enterprise chipsets, the residential positioning reduces cost without sacrificing the 6 GHz band that differentiates modern SOHO offerings. In these designs the SoC typically pairs with a modest CPU and gigabit or multi-gig Ethernet PHY, and enclosure-constrained thermal budgets must account for sustained concurrent tri-band operation. Designers should follow Broadcom reference front-end designs and validate AFC/6 GHz regulatory compliance for the target sales regions before certification.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für BCM6715B0KFFBG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | BGA (FFBG suffix) |
| Brand | Broadcom |
| Wireless Standard | 802.11ax Release 2 (Wi-Fi 6/6E) |
| Radio Configuration | 4x4 MIMO |
| Operating Bands | 2.4 GHz / 5 GHz / 6 GHz |
| Max Channel Bandwidth | 160 MHz |
| Unit Price (qty 1, as of 2026-10-20) | $22.8574 (LCSC) |
| Drop-in Pin Compatible | N/A (no verified drop-in alternatives found) |
Wichtigste Unterscheidungsmerkmale
- Wi-Fi 6E 6 GHz band support (vs. BCM6750 (earlier Wi-Fi 6 SoC))
- 802.11ax Release 2 features (vs. BCM6750)
- Single-die MAC/PHY/radio integration (vs. Multi-chip Wi-Fi solutions)
Designhinweise
A 4x4 tri-band Wi-Fi 6E SoC transmitting on 160 MHz channels dissipates significant heat in a small BGA footprint. Route thermal vias under the package land pattern into an internal copper plane or exposed heatsink area of the enclosure. Broadcom reference designs for BCM6715-based APs specify thermal spreading solutions; follow them rather than estimating. Validate sustained tri-band TX modes (not just idle or single-band) during thermal validation, since concurrent 2.4/5/6 GHz operation is the worst-case power scenario.
RF layout discipline is essential: keep 2.4/5/6 GHz feed lines matched (50 ohm), use the antenna placement and front-end module selection from Broadcom's reference design, and reserve keep-out zones around the RF ballout. Because the 6 GHz band is newly regulated, verify regional power limits and Automatic Frequency Coordination (AFC) requirements in firmware for each target market before certification. Per Broadcom Knowledge article 193323, register-level and RF calibration documentation is only available via the docSAFE NDA portal.
The most common sourcing pitfall with the BCM6715B0KFFBG is assuming public datasheet availability: full specifications are NDA-controlled, so schematic capture based on incomplete public data risks redesign. A second pitfall is assuming drop-in substitution from other Wi-Fi SoCs - Broadcom Wi-Fi AP chips are platform parts requiring matching driver/firmware stacks, so second sourcing demands board and software rework. Finally, confirm RoHS/compliance documentation explicitly via RFQ, as distributor pages for this part do not state compliance status publicly.
Compliance-Informationen
Public distributor pages for BCM6715B0KFFBG (LCSC, Kynix, Octopart) do not state RoHS/REACH/compliance status. Compliance documentation must be obtained from Broadcom directly or via RFQ. Consumer networking SoCs are not AEC-Q100 automotive parts.
