Silicon Labs

C8051F006-GQ - 25MHz 32KB 8-Bit MCU | Silicon Labs

Teilenummer: C8051F006-GQ ✓ Aktiv
2.7 V to 3.6 V Vdss 48-pin TQFP (7 mm x 7 mm) Package 25 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

C8051F006-GQ Übersicht

The Silicon Labs C8051F006-GQ is an 8-bit C8051 mixed-signal microcontroller operating at 25 MHz with 32 KB of Flash program memory, 2.25 KB of RAM, a 12-bit ADC, and a 48-pin TQFP package. The device operates from a 2.7 V to 3.6 V supply and delivers up to 25 MIPS of instruction throughput.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The C8051F006 belongs to the C8051F00x family and combines a general-purpose 8051 instruction set with mixed-signal acquisition hardware. This hierarchy places it within the CISC microcontroller category, where it supports compact embedded control, analog measurement, serial communication, and general-purpose industrial products.

Principal features include 32 KB of Flash for firmware storage, 2.25 KB of internal RAM for working data, and a 12-bit ADC for analog-to-digital conversion. Its 25 MHz operating frequency supports a 25 MIPS execution rate, while the 48-pin TQFP package provides a conventional surface-mount footprint with extensive external signal access. The 2.7 V to 3.6 V operating range suits regulated 3 V embedded systems.

The mixed-signal architecture allows digital control and analog measurement to share one component, reducing system size and simplifying PCB routing compared with separate MCU and ADC arrangements. The C8051 core uses a CISC architecture familiar to many embedded-control engineers. For connected equipment, the device's peripheral resources support UART, timers, digital I/O, and other embedded-control functions, subject to the exact pin allocation and peripheral configuration documented for the selected package.

Typical applications include industrial data-acquisition modules, programmable instrumentation, temperature controllers, motor and actuator controllers, and communication equipment. It is particularly useful when a design needs moderate processing speed, local Flash storage, and higher-resolution analog conversion without requiring a higher-cost 32-bit MCU. The 48-pin TQFP package also allows a larger exposed I/O complement than smaller microcontrollers.

PCB design should preserve short analog traces, maintain a quiet supply reference for the ADC, and follow the manufacturer pin-description table when assigning connector and sensor signals. Decoupling and grounding are particularly important in mixed-signal systems because switching currents from digital circuitry can couple into the ADC input and measurement reference.

This page combines package, memory, analog-conversion, and application details with drop-in comparison information for engineering evaluation. It supports design selection by linking the C8051F006-GQ's 25 MHz core, 32 KB Flash, 12-bit ADC, and 48-pin TQFP characteristics directly to practical embedded-control requirements.

Drop-in-Alternativen für C8051F006-GQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

C8051F005-GQ

✅ Drop-In
📦 48-TQFP (7 mm x 7 mm)
RAM is 2.25 KB on the C8051F006-GQ versus lower RAM on the C8051F005-GQ; core speed is 25 MHz and Flash is 32 KB on both

📋 Referenzalternative (nicht im Katalog)

C8051F016-GQ

✅ Drop-In
📦 48-TQFP (7 mm x 7 mm)
Same C8051F00x platform and 48-pin TQFP format, with the C8051F016-GQ using different peripheral resource levels; core and Flash differences require firmware review

📋 Referenzalternative (nicht im Katalog)

C8051F001-GQ

✅ Drop-In
📦 48-TQFP (7 mm x 7 mm)
Same 25 MHz 8051-family architecture and package, but the C8051F001-GQ has 4 KB Flash versus 32 KB on the C8051F006-GQ, a 87.5% reduction

📋 Referenzalternative (nicht im Katalog)

C8051F006-GQ Grenzwerte & elektrische Eigenschaften

Product Type 8-bit mixed-signal microcontroller
Processor Core 8051 CISC core
Maximale Taktfrequenz 25 MHz
Maximum Instruction Throughput 25 MIPS
Flash Memory 32 KB (32K x 8)
RAM Memory 2.25 KB
ADC Resolution 12 bits
ADC Channel Count 12 channels
Supply Voltage Range 2.7 V to 3.6 V
Nominal Supply Voltage 3.3 V
Gehäuse 48-pin TQFP (7 mm x 7 mm)
Montageart Surface mount
Program Memory Type In-system programming Flash

C8051F006-GQ 48-pin tqfp (7 mm x 7 mm) Pinbelegungsleitfaden

Pinbelegung für C8051F006-GQ (48-pin tqfp (7 mm x 7 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für C8051F006-GQ im 48-pin tqfp (7 mm x 7 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für C8051F006-GQ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

C8051F006-GQ ist geeignet für 6 Anwendungs: Industrial Sensor Acquisition, Programmable Instrumentation, Temperature and Process Control, Communication Equipment, Motor and Actuator Control, Embedded Control Gateway.

🏭

Industrial Sensor Acquisition

The C8051F006-GQ fits compact data-acquisition modules that combine several analog sensors with local control logic. Its 12-bit, 12-channel ADC provides substantially finer quantization than an 8-bit converter, while the 25 MHz C8051 core handles sampling, filtering, and communication tasks. The 32 KB Flash holds acquisition firmware and calibration tables, and 2.25 KB of RAM provides working space for sampled values and serial buffers. Use a quiet analog reference, short sensor traces, and separate return paths to digital circuitry to prevent switching noise from degrading measurements.

🔧

Programmable Instrumentation

The C8051F006-GQ is appropriate for programmable laboratory and field instruments that combine measurement, user interaction, and serial control. Its 25 MIPS throughput supports responsive foreground control, while the 32 KB Flash accommodates menus, configuration data, and acquisition routines. The 12-bit ADC can digitize pressure, temperature, or potentiometer inputs without a separate high-resolution converter. Firmware should calibrate offset and gain against the selected reference, and the analog section should remain physically separated from display and communication switching circuits.

⚡

Temperature and Process Control

The C8051F006-GQ can serve as the control center for a temperature controller or simple process regulator because it combines a 25 MHz control core with 12 analog inputs. It can read thermocouple-conditioned or resistive-sensor signals, apply filtering and control calculations, and update outputs through its digital I/O. The 32 KB Flash is useful for storing calibration coefficients and control tables, while 2.25 KB of RAM supports filtering state and communications. Validate sensor settling time and provide over-temperature shutdown behavior independent of the main control loop.

🌐

Communication Equipment

The C8051F006-GQ is suitable for embedded communication equipment requiring a local 8051 controller, mixed-signal monitoring, and a moderate firmware footprint. Its 25 MHz operation supports protocol handling and supervisory logic, while 32 KB Flash provides room for protocol stacks and configuration records. The 12-bit ADC can monitor supply voltage, temperature, or signal quality for diagnostics. The 48-pin TQFP package also leaves sufficient pins for serial interfaces, status indicators, and external transceivers when the alternate-function assignments are confirmed in the datasheet.

🔧

Motor and Actuator Control

The C8051F006-GQ can control compact motors, valves, relays, and stepper actuators when the board includes the required driver circuitry. Its 25 MHz 8051 core supports deterministic sequencing, timing, and sensor feedback, while the 12-bit ADC improves the resolution of current, position, or potentiometer feedback. The 32 KB Flash stores motion tables and control algorithms, and the 48-pin package provides a useful balance of I/O and analog access. Use transistor or driver stages for inductive loads and keep high-current return paths away from the ADC reference.

🖥️

Embedded Control Gateway

The C8051F006-GQ can function as a small control gateway that gathers local sensor readings, validates them, and passes information to a host processor. Its 32 KB Flash supports protocol handling and firmware updates through in-system programming, while 2.25 KB of RAM is sufficient for packet assembly and measurement buffering. The 12-bit ADC is useful for analog source nodes that do not justify a separate converter. Define watchdog recovery, communication timeouts, and brownout behavior in firmware before deployment in unattended equipment.

What are the key specifications of C8051F006-GQ that engineers should know?
The C8051F006-GQ combines a 25 MHz 8051 core, 32 KB of Flash, 2.25 KB of RAM, and a 12-bit, 12-channel ADC in a 48-pin TQFP package. According to the Silicon Labs manufacturer datasheet, the device operates from 2.7 V to 3.6 V and supports up to 25 MIPS instruction throughput. These figures make it suitable for embedded products that need local firmware storage, mixed-signal measurement, and more external connections than a small-package MCU can provide.
What is the operating voltage of the C8051F006-GQ?
The C8051F006-GQ operates from 2.7 V to 3.6 V, with 3.3 V identified as the nominal operating supply in the product data. According to the Silicon Labs manufacturer datasheet, the MCU is designed for regulated 3 V embedded systems. Board design should maintain a stable supply across the full 2.7 V to 3.6 V range, with local high-frequency decoupling placed close to the supply and ground pins.
How much Flash and RAM does the C8051F006-GQ contain?
The C8051F006-GQ contains 32 KB of Flash program memory, organized as 32K x 8, and 2.25 KB of internal RAM. According to the Silicon Labs manufacturer datasheet, the Flash supports in-system programming, allowing firmware to be programmed or updated without removing the device from its circuit. The memory combination is appropriate for moderate embedded-control applications requiring both persistent code storage and working RAM.
What type of ADC does the C8051F006-GQ use?
The C8051F006-GQ includes a 12-bit ADC with 12 analog input channels. According to the Silicon Labs manufacturer datasheet, this resolution supports measurement systems that need finer quantization than an 8-bit converter while retaining the simplicity of an 8-bit embedded controller. Analog input routing, acquisition timing, reference voltage, and input-impedance requirements must follow the manufacturer recommendations in the datasheet.
Where can I download the C8051F006-GQ datasheet PDF?
The C8051F006-GQ datasheet PDF is available from the Silicon Labs document listing linked on this page, which contains the manufacturer's pin descriptions, electrical characteristics, memory map, and peripheral information. According to the manufacturer datasheet, the device is a 25 MHz, 32 KB Flash mixed-signal MCU in a 48-pin TQFP package. Use the pin-description table and electrical-characteristics sections as the controlling references for PCB and firmware implementation.
Where can I find the C8051F006-GQ pinout?
The C8051F006-GQ uses a 48-pin TQFP package, and its numbered pin assignments are documented in the Silicon Labs manufacturer datasheet. Use the pin-description table when assigning power, ground, analog inputs, port signals, programming interfaces, and clock connections. Do not infer pin functions solely from a generic 48-pin drawing because the exposed pad, power pins, and analog assignments are specific to this device.
What can replace the C8051F006-GQ on the same PCB?
The closest supported replacement is the 48-pin TQFP C8051F005-GQ, which uses the same Silicon Labs C8051F00x platform but provides less internal RAM. According to the Silicon Labs comparison data, both devices share the 25 MHz, 32 KB Flash, 8-bit MCU architecture, making the F005 the closer same-package alternative. Firmware and board-level pin compatibility must still be checked before approving a substitution.
Is the C8051F006-GQ the same as the C8051F006R?
No. The C8051F006-GQ is the 48-pin TQFP orderable variant, while C8051F006R denotes a different ordering or package-related version of the C8051F006 device. According to the Silicon Labs comparison information, these are related but not automatically interchangeable because package construction and ordering details differ. Confirm the physical lead configuration, exposed-pad requirements, and supported temperature range before treating either part as a substitution.
When should I choose the C8051F006-GQ over the C8051F005-GQ?
Choose the C8051F006-GQ when the design needs more RAM or additional mixed-signal functionality than the C8051F005-GQ provides. According to the Silicon Labs comparison data, both operate at 25 MHz with 32 KB Flash, but the F006 has 2.25 KB of RAM versus the lower RAM allocation of the F005. The F005 is appropriate when its resources are sufficient; the F006 offers more working memory for buffering, communication, or concurrent control tasks.
C8051F006-GQ vs C8051F016-GQ — which is better for mixed-signal control?
The C8051F006-GQ is the stronger match when an existing design specifically targets the F006's 25 MHz core, 32 KB Flash, 2.25 KB RAM, and 12-bit ADC arrangement. According to the Silicon Labs comparison information, the C8051F016-GQ belongs to the same broader family and uses a comparable 48-pin TQFP format, but its available resources differ. Select it only after checking every pin, peripheral, memory requirement, and firmware dependency.
Is the C8051F006-GQ suitable for industrial sensor acquisition?
The C8051F006-GQ is suitable for industrial sensor-acquisition designs that fit a 3 V supply and require a 12-bit ADC. According to the Silicon Labs manufacturer datasheet, the device provides 12 ADC channels, 32 KB Flash, 2.25 KB RAM, and a 25 MHz CPU. For industrial deployment, verify the exact operating-temperature grade, isolation requirements, input protection, calibration strategy, and analog-reference design.
Where to buy the C8051F006-GQ online?
The C8051F006-GQ can be evaluated for purchase through the Request a Quote form on this page. The form allows engineers to request current availability, lot information, and a quotation for the exact 48-pin TQFP ordering code. Confirm the manufacturer name, C8051F006-GQ suffix, package, quantity, and operating-temperature requirements in the request so the returned quotation matches the intended production configuration.
What is the price of the C8051F006-GQ?
The current unit price for the C8051F006-GQ is handled through the Request a Quote form on this page rather than a static price table. Submit the exact MPN, required quantity, package, and delivery target to receive current pricing and commercial terms. This approach also helps distinguish the 48-pin TQFP C8051F006-GQ from related C8051F006 order codes that may use different commercial configurations.
What is the lead time for the C8051F006-GQ?
The current production lead time should be requested through the Request a Quote form on this page using C8051F006-GQ as the manufacturer part number. Provide the annual and build quantities, required delivery date, and approved vendor conditions where applicable. The manufacturer lifecycle listing should also be checked during sourcing because availability and order handling can change independently of the device's electrical characteristics.
Is the C8051F006-GQ in stock?
Current C8051F006-GQ stock status should be confirmed through the Request a Quote form on this page. Include the exact quantity, date required, and whether unbroken production lots or date-code control are necessary. The exact ordering code must be stated because C8051F006 variants can differ in package, temperature grade, or commercial status, making a generic family-level availability response unsuitable.
What is the best cross-brand equivalent for the C8051F006-GQ?
No cross-brand drop-in equivalent is established for the C8051F006-GQ by the available component cross-reference information. According to the manufacturer and distributor descriptions, the device combines a proprietary 8051 derivative, 32 KB Flash, 2.25 KB RAM, a 12-bit ADC, and a 48-pin TQFP footprint, making a genuine pin-to-pin substitute difficult to verify. A cross-brand migration should therefore be treated as a redesign rather than a drop-in replacement.

Technische Referenzdaten für C8051F006-GQ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the C8051F006-GQ for a 3 V mixed-signal control design that specifically requires 32 KB Flash, 2.25 KB RAM, a 12-bit, 12-channel ADC, and a 48-pin TQFP footprint. The C8051F005-GQ is the closest same-package option when its lower RAM allocation is sufficient, but it should not be selected merely for a slightly lower resource requirement. The C8051F016-GQ belongs to the same family and package format but should be used when its alternative peripheral allocation offers a functional benefit and its full pin configuration has been verified. The C8051F001-GQ is suitable only when 4 KB Flash is enough because firmware size increases eightfold from 4 KB to 32 KB. For all candidates, review startup, programming, oscillator, ADC, and exposed-pad requirements before releasing a production design.

Vergleich mit Alternativen

Parameter Dieses Produkt C8051F005-GQ C8051F016-GQ C8051F001-GQ
Package 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Architecture 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC 8-bit 8051 CISC
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Special Resource Difference 2.25 KB RAM and 12-channel ADC Lower RAM allocation Different peripheral resource levels 4 KB Flash; reduced memory

Wichtigste Unterscheidungsmerkmale

  • Higher working memory within the C8051F00x family (vs. C8051F005-GQ)
  • Larger program-memory capacity (vs. C8051F001-GQ)
  • Balanced 12-bit analog conversion and processing performance (vs. C8051F016-GQ)

Designhinweise

Place the MCU's supply bypass capacitor immediately between the nearest supply and ground pins, and keep the analog ground and digital ground strategy consistent with the manufacturer recommendations. Route sensor inputs away from clock, PWM, relay, and serial-bus traces. A 12-bit converter can resolve small signal changes, so PCB leakage and ground coupling that would be negligible in an 8-bit design may become measurable. Use guarding where appropriate and avoid switching nodes beneath analog inputs.

Design the supply rail for the full 2.7 V to 3.6 V operating range and include margin for startup current, analog peripherals, I/O loading, and connected communications hardware. Avoid long shared supply paths between the MCU and switching circuits. Verify brownout and reset behavior across the intended input range, especially when the device controls motors, relays, or heaters. The ADC reference must remain within its specified range while the MCU is active and during reset transitions.

Do not treat another C8051F00x MPN as an automatic substitution merely because it uses a 48-pin TQFP. Check the complete pin-description table, alternate functions, exposed-pad connection, supply pins, ADC channel availability, oscillator connections, programming interface, flash capacity, and operating-temperature grade. The C8051F001-GQ has only 4 KB Flash, while the C8051F016-GQ and C8051F005-GQ differ in memory or peripheral resources, so firmware and board compatibility require separate review.

The TQFP package is suitable for conventional surface-mount assembly, but the exposed thermal pad should be connected according to the manufacturer's land pattern and thermal guidance. Keep analog and digital return paths controlled so that regulator or pad current does not create ground offsets in the ADC input. Validate elevated-temperature operation using the actual board, enclosure, and switching load because the component temperature rise depends on the PCB copper area and nearby heat sources rather than package type alone.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact C8051F006-GQ ordering code. Automotive qualification is not indicated by the manufacturer designation, so AEC-Q100 is marked not applicable.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

C8051F006-GQ datasheet C8051F006-GQ specifications C8051F006-GQ pinout C8051F006-GQ datasheet pdf Silicon Labs C8051F006-GQ C8051F006-GQ 48-pin TQFP C8051F006-GQ equivalent C8051F006-GQ replacement C8051F006-GQ cross reference C8051F006-GQ vs C8051F005-GQ C8051F006-GQ price C8051F006-GQ stock C8051F006-GQ 25MHz 32KB Flash C8051F006-GQ 12-bit ADC C8051F006-GQ industrial control

Verwandte Bauteile & Begriffe

Silicon Labs C8051F006-GQ C8051F005-GQ C8051F016-GQ C8051F001-GQ C8051F00x 8-bit microcontroller mixed-signal microcontroller CISC 8051 instruction set embedded control industrial sensor acquisition programmable instrumentation process control 12-bit ADC 25 MHz 25 MIPS 32 KB Flash 2.25 KB RAM 48-pin TQFP TQFP package family surface mount 2.7 V to 3.6 V in-system programming RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen