C8051F060 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
Teilenummer: C8051F060 ✓ AktivC8051F060 Übersicht
A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog functions on one device. The C8051F060 belongs to the microcontroller hierarchy, where its CIP-51 core executes firmware while the integrated converters and comparators measure or generate analog signals. This consolidation can reduce board area, external component count, and system complexity in industrial control, instrumentation, communications, and embedded data-acquisition equipment.
The device operates at 25 MHz and provides 64 KB of flash plus 4352 bytes of on-chip RAM. Its 59 general-purpose digital I/O lines support multiple ports, while its mixed-signal resources include two 16-bit high-speed SAR ADCs, an eight-channel 10-bit ADC, and a two-channel 12-bit DAC. Three analog comparators support thresholding, waveform generation, and basic autonomous control functions.
Communications resources include two UARTs, SPI, hardware SMBus compatible with I2C, and CAN 2.0B. According to the Silicon Labs C8051F06x manufacturer datasheet, the peripheral set also includes a programmable 16-bit counter/timer array with six capture/compare modules, five general-purpose 16-bit timers, and a dedicated watchdog timer. An internal calibrated precision oscillator is specified at 24.5 MHz.
Typical applications include industrial process control, CAN-connected equipment, data-acquisition systems, analog control panels, test and measurement products, and embedded controllers requiring both serial communications and analog conversion. The integration of ADC, DAC, comparators, timers, and multiple serial interfaces allows a compact design without requiring separate analog or communication ICs.
Designers should verify the exact package suffix and pin mapping against the manufacturer datasheet, because C8051F060 is ordered in package-specific forms such as C8051F060-GQ. PCB layout should separate sensitive analog inputs from high-speed digital signals, provide appropriate analog grounding and bypass capacitance, and account for the thermal and decoupling requirements of the complete mixed-signal system.
This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family drop-in options, and practical selection guidance. It is intended to help engineers identify the correct 100-pin variant, compare MCU resources, and evaluate whether the C8051F060 provides sufficient analog, communications, and digital I/O capability for a new embedded design.
Drop-in-Alternativen für C8051F060 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit C8051F060 (gleiche Bauform und Footprint) – abweichend in Package, Microcontroller Type.
C8051F060-GQ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
C8051F062
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →C8051F064
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →C8051F066
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
C8051F120
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
C8051F130
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
C8051F060 Grenzwerte & elektrische Eigenschaften
| Device Type | 8-bit mixed-signal microcontroller |
| Core | CIP-51 8051-compatible core |
| Maximale Taktfrequenz | 25 MHz |
| Internal Precision Oscillator | 24.5 MHz |
| Flash Memory | 64 KB (64K x 8) |
| On-Chip RAM | 4352 bytes (4096 + 256 bytes) |
| General-Purpose Digital I/O | 59 pins |
| Primary ADC | 2 channels, 16-bit, 1 Msps |
| Additional ADC | 8 channels, 10-bit |
| DAC | 2 channels, 12-bit |
| Analog Comparators | 3 |
| Communications Interfaces | 2 UART, SPI, SMBus/I2C compatible, CAN 2.0B |
| General-Purpose Timers | 5 x 16-bit |
| PCA Capture/Compare Modules | 6 |
| Watchdog Timer | Dedicated |
| On-Chip Temperature Sensor | Present |
| Gehäuse | 100-pin TQFP, 14 x 14 mm |
| Montageart | Surface mount |
C8051F060 100-pin tqfp, 14 x 14 mm Pinbelegungsleitfaden
Pinbelegung für C8051F060 (100-pin tqfp, 14 x 14 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für C8051F060.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
C8051F060 ist geeignet für 6 Anwendungs: Industrial Process Control, CAN-Connected Control Systems, Data Acquisition and Instrumentation, Analog Control Panels, Communications Equipment, Test and Measurement Products.
Industrial Process Control
The C8051F060 fits industrial process-control equipment that must acquire analog process variables and operate communications in one controller. Its two 16-bit 1 Msps ADCs provide higher conversion resolution than the additional eight-channel 10-bit ADC, while the three comparators can support direct threshold detection. The 25 MHz core provides useful control headroom, and CAN 2.0B, two UARTs, SPI, and SMBus simplify connections to sensors, operator interfaces, and remote I/O. A design must still provide appropriate analog conditioning, surge protection, isolation where required, and validated wiring protection for industrial connectors.
Empfohlen
CAN-Connected Control Systems
The C8051F060 is suitable for CAN-connected actuators, machine controllers, and distributed industrial nodes because it combines a 25 MHz CIP-51 core with a dedicated CAN 2.0B interface. Its 59 digital I/O lines can operate sensors, relays, status indicators, and local controls, while the dual 16-bit ADCs support feedback from analog transducers. The two UARTs and SMBus allow service or configuration channels to coexist with CAN. Firmware should include CAN error handling, bus-off recovery, watchdog management, and appropriate bus termination; final EMC and isolation design remains equipment-specific.
Empfohlen
Data Acquisition and Instrumentation
The C8051F060 suits compact data-acquisition and instrumentation products requiring multiple analog inputs, high-speed sampling, and local data handling. Its primary converters provide two 16-bit channels at 1 Msps, while the separate eight-channel 10-bit ADC supports less demanding analog inputs. The 64 KB in-system programmable flash stores application firmware, and 4352 bytes of RAM provides working space. Engineers should match input bandwidth, source impedance, reference voltage, and acquisition timing to the converter specifications, and use careful analog layout to prevent digital switching noise from limiting measurement accuracy.
Empfohlen
Analog Control Panels
The C8051F060 can act as the central controller in an analog control panel where setpoints must be measured and applied to actuators. The three analog comparators can provide fast threshold events, the two 16-bit ADCs can measure feedback signals, and the two-channel 12-bit DAC can generate control outputs. Its 59 I/O lines reduce the need for external I/O expanders, while SPI and SMBus allow connection to display, storage, or calibration devices. Production designs should verify output settling, DAC load capability, reference stability, and fail-safe behavior during power transitions.
Empfohlen
Communications Equipment
The C8051F060 is appropriate for embedded communications equipment that needs protocol flexibility and local control. Two UARTs can support independent serial links, while SPI and hardware SMBus provide faster chip-to-chip or sensor connectivity. The CAN 2.0B peripheral adds a robust option for industrial networking, and the 25 MHz core can service multiple interrupt-driven channels. Designers should budget peripheral RAM, DMA-free data movement, interrupt latency, and protocol stack requirements. The 64 KB flash configuration should be checked against compiled application size, including bootloader and security updates.
Empfohlen
Test and Measurement Products
The C8051F060 supports test and measurement instruments that combine signal acquisition, control, and host communications. The two 16-bit 1 Msps ADCs are useful for sampled measurements, the 12-bit DAC can provide stimulus or bias levels, and the analog comparators can support threshold-based measurements. UART, SPI, SMBus, and CAN allow the instrument to integrate with automated test systems and service interfaces. The embedded application must account for input bandwidth, sampling synchronization, reference accuracy, calibration, and noise coupling. For laboratory-grade accuracy, a precision external reference may be preferable, subject to the datasheet's reference requirements.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für C8051F060 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | C8051F060-GQ | C8051F062 | C8051F064 | C8051F066 |
|---|---|---|---|---|---|
| Package | 100-pin TQFP, 14 x 14 mm | 100-pin TQFP, 14 x 14 mm | 100-pin TQFP, 14 x 14 mm | 100-pin TQFP, 14 x 14 mm | 100-pin TQFP, 14 x 14 mm |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | CIP-51 8051-compatible core | CIP-51 8051-compatible core | CIP-51 8051-compatible core | CIP-51 8051-compatible core | CIP-51 8051-compatible core |
Wichtigste Unterscheidungsmerkmale
- High-resolution and high-speed analog conversion (vs. ATMEGA88A-MU)
- Integrated CAN and multiple serial interfaces (vs. AT90USB646-MUR)
- More integrated analog output capability (vs. ATMEGA1280V-8AUR)
Designhinweise
Follow the Silicon Labs C8051F06x datasheet layout recommendations for analog and digital grounds, bypass capacitors, and high-speed signal routing. Keep the two 16-bit ADC input paths away from switching nodes and communication outputs, and place input and output bypass capacitors close to their associated supply pins. The verified sources confirm the mixed-signal architecture but do not provide a complete pin table or capacitor values, so those values must be taken directly from the manufacturer datasheet rather than estimated.
Design the supply network for both the 25 MHz digital core and the analog converter subsystem. Verify the device's exact operating-voltage range, regulator tolerances, and sequencing requirements in the official manufacturer datasheet because those values were not present in the supplied search excerpts. Decouple supply pins according to the datasheet, maintain a stable analog reference, and avoid allowing supply ripple or digital return currents to corrupt ADC measurements.
Do not assume that every C8051F06x suffix is a drop-in replacement solely because the devices belong to the same family. The verified C8051F060-GQ device is a 100-pin TQFP with 25 MHz operation, 64 KB flash, and 59 I/O pins. Before adopting C8051F062, C8051F064, C8051F066, C8051F120, or C8051F130, compare the exact package drawing, power pins, clock configuration, peripheral availability, memory size, and software target in the manufacturer documentation.
Treat the 59 I/O and multiple serial interfaces as potential sources of switching noise near the analog converters. Use a controlled return-current path, avoid routing high-current outputs beneath sensitive ADC or DAC nets, and provide isolation between external connectors and precision analog signals. If the completed board also contains CAN, UART, or SPI connectors, check their ground and surge-current requirements separately from the internal logic ground.
Compliance-Informationen
The verified manufacturer and distributor excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred. The C8051F060-TB-K listing is an evaluation board and does not establish the production IC's compliance status.
