CD4017AF/3 - 10-Bit CMOS Decade Counter | Harris
Teilenummer: CD4017AF/3 ✗ AbgekündigtCD4017AF/3 Übersicht
A CMOS decade counter belongs to the CD4000 logic family, which provides low-power digital operation for clocking, sequencing, and state-control applications. Its hierarchy is CD4017 counter, decade counter and divider, logic IC, digital semiconductor, and integrated circuit. Unlike a binary counter that presents only a binary code, the CD4017AF/3 provides one active decoded output for each of ten count states, simplifying designs that directly drive stepper-related sequencing or multi-position timing controls.
The CD4017AF/3 provides 10 decoded outputs, positive and negative edge operation, and one counter element. Its 16-CDIP construction supports through-hole assembly and maintenance applications. The part is identified as an industrial-grade CMOS logic device and is categorized under EAR99 export-control classification. The bulk packaging form and MSL Level 3 rating, equivalent to a 168-hour floor-life limit, define its handling constraints when the package has been exposed to the environment.
Operationally, the counter advances when its clock input receives an applicable edge, and the decoded outputs follow the decade sequence. The reset function returns the device to a defined starting state so each operating cycle begins consistently. Because it combines counting with decoded outputs, the device can divide an incoming frequency into ten sequential phases without requiring a separate binary decoder. Practical circuit design still requires correct clock-edge selection, reset timing, and suitable handling of unused inputs.
Typical uses include industrial timing and sequencing, pulse-position generation, frequency division, control-panel step selection, low-power digital logic, and test or measurement systems that need ten discrete timing phases. The 10-output architecture is especially useful when a controller must activate one stage at a time rather than interpret a multi-bit binary number.
For reliable operation, connect the reset signal so it cannot float, use pull-up or pull-down components where the clock interface requires defined levels, and respect the manufacturer's recommended decoupling. Confirm the electrical limits and unused-pin states in the Harris Corporation datasheet before assigning signals or modifying an existing PCB.
This page combines functional identification, package and lifecycle guidance, verified drop-in alternatives, comparison fields, and practical implementation notes. It helps engineers evaluate the CD4017AF/3 as a legacy-compatible decade counter while identifying which circuit functions, voltage details, and package-specific constraints still require confirmation from the manufacturer datasheet.
Drop-in-Alternativen für CD4017AF/3 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CD4017AF/3 (gleiche Bauform und Footprint) – abweichend in Package.
CD4017BE
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CD4017BE
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MC14017B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HEF4017B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CD4017BM
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CD4017AF/3 Grenzwerte & elektrische Eigenschaften
| Product Type | CMOS decade counter and divider |
| Counting Elements | 1 element |
| Decoded Outputs | 10 outputs |
| Logic Type | Counter |
| Counting Sequence | Decade |
| Bit Count | 10 bit |
| Clock Edge | Positive and negative |
| Gehäuse | 16-CDIP |
| Montageart | Through-hole |
| Technology | CMOS |
| MSL-Level | Level 3 (168 hours) |
| ECCN | EAR99 |
| HTSUS Code | 8542.39.0001 |
| REACH Status | Vendor undefined |
| Industrial Grade | Yes |
CD4017AF/3 16-cdip Pinbelegungsleitfaden
Pinbelegung für CD4017AF/3 (16-cdip-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CD4017AF/3.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CD4017AF/3 ist geeignet für 6 Anwendungs: Industrial Timing and Sequencing, Frequency Division and Step Generation, Pulse-Position Control, Low-Power Digital Control, Test and Measurement Sequencing, Legacy Equipment Maintenance.
Industrial Timing and Sequencing
The CD4017AF/3 fits industrial timing and sequencing circuits because one counter element drives 10 decoded outputs, allowing ten operating phases to be activated in a fixed sequence. The 16-CDIP package supports through-hole construction and serviceable assemblies. Designers can use the positive or negative clock-edge capability to match the triggering convention of surrounding control logic. Reset must be arranged so it holds the counter in a defined initial state and cannot float during power transitions. Confirm voltage, temperature, and timing limits in the Harris Corporation datasheet before applying the device to safety-related or continuously operating machinery.
Empfohlen
Frequency Division and Step Generation
The CD4017AF/3 is useful for dividing an incoming clock into ten sequential output phases because its decade counter produces one active decoded output per count state. This simplifies pulse-position or stepped-control generation without adding a separate binary decoder. Engineers should select the appropriate positive or negative clock edge and verify maximum operating frequency for the required supply voltage. The reset path should return all sequencing to a repeatable starting condition. The device's industrial-grade designation supports industrial equipment use, while the exact operating temperature and supply-current budget remain defined by the manufacturer datasheet.
Empfohlen
Pulse-Position Control
A CD4017AF/3 can generate ten position-specific control pulses because its 10 decoded outputs switch in sequence as the input clock advances. The circuit can directly enable one stage of a multi-step actuator, relay sequence, or timing chain, reducing the need for decoding a binary count externally. Through-hole 16-CDIP construction is advantageous for legacy control boards, test fixtures, and repair assemblies. Ensure the driven output remains within the device's electrical limits, provide defined levels for unused inputs, and include a controlled reset path so every pulse sequence starts from a known state.
Empfohlen
Low-Power Digital Control
The CD4017AF/3 is suitable for low-power digital control because CMOS logic supports efficient operation and the device combines counting with ten decoded outputs on one package. It can divide a system clock and distribute ordered enables to sensors, indicators, or control stages without continuous combinational decoding. Power consumption depends on supply voltage, clock activity, and output loading, so use the manufacturer timing and current information for the final thermal estimate. Decoupling should follow the Harris Corporation application guidance, and the reset and clock inputs should never be left without a defined electrical state.
Empfohlen
Test and Measurement Sequencing
The CD4017AF/3 can organize a measurement or test sequence into ten clock-derived stages using its 10 decoded outputs. A test controller can enable relays, fixture switches, or measurement channels in a reproducible order, while the reset input establishes the beginning of every cycle. The 16-CDIP package is convenient for legacy instrumentation where through-hole repairability is important. Validate maximum clock frequency, output rise and fall behavior, and supply limits in the Harris Corporation datasheet. Also account for output loading when connected to relay drivers or long circuit-board traces.
Empfohlen
Legacy Equipment Maintenance
The CD4017AF/3 is particularly relevant to maintenance of legacy electronic equipment because it retains the Harris Corporation 16-CDIP mechanical format and established decade-counter function. Technicians can identify the required ten-output sequence, clock polarity, and reset behavior before replacing the original device. A qualified drop-in candidate must preserve the 16-pin footprint and provide compatible decoded outputs, edge triggering, reset polarity, and electrical limits. Use the manufacturer datasheet to verify pin assignments, obtain the current procurement date code, and avoid accepting a merely similar 4017 device with different voltage or timing characteristics.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CD4017AF/3 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CD4017BE | CD4017B | MC14017B | HEF4017B | CD4017BM |
|---|---|---|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Harris Corporation | Texas Instruments | Texas Instruments | onsemi | NXP Semiconductors | Microchip Technology |
| Product Type | CMOS decade counter and divider | CMOS decade counter and divider | CMOS decade counter and divider | CMOS decade counter and divider | CMOS decade counter and divider | CMOS decade counter and divider |
| Counting Elements | 1 element | 1 element | 1 element | 1 element | 1 element | 1 element |
| Decoded Outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs |
Wichtigste Unterscheidungsmerkmale
- Original Harris Corporation identification (vs. CD4017BE)
- Ten directly decoded states (vs. SN74HC393)
- Through-hole 16-CDIP serviceability (vs. CD74HC4017)
- Positive and negative clock-edge options (vs. MC14017B)
Designhinweise
Do not treat every part labeled CD4017 as automatically interchangeable. Confirm the exact manufacturer suffix, 16-pin footprint, pin numbering, clock-edge convention, reset polarity, supply-voltage range, and propagation timing against the Harris Corporation datasheet. Pay particular attention to unused inputs and ensure they are tied to defined logic levels. A package with the same number of leads is not sufficient if its function or timing differs.
Design the supply rail and bypass network from the Harris Corporation datasheet before energizing the counter. CMOS input transitions can produce transient current even when static consumption is low, and clock frequency increases dynamic demand. Keep the regulator capable of the required current, place the recommended bypass capacitor close to the supply pins, and avoid long supply traces that share current paths with switching stages.
For the 16-CDIP implementation, route the clock and reset signals away from noisy switching nodes and keep their return paths short. A controlled reset network should override clock activity during startup and return the sequence to a known state. Check the package drawing for pin orientation, use a consistent DIP socket or board footprint, and verify every decoded output against the physical pin table before energizing the board.
Treat the clock as a digital timing signal and account for propagation delay, transition time, and output loading when sequencing fast events. Long interconnects or slow input edges can produce multiple counts or uncertain decode states. Use the manufacturer's maximum clock-frequency conditions for the selected supply voltage, keep clock traces compact, and validate the reset release timing relative to the first active clock edge.
Compliance-Informationen
The component record lists REACH status as vendor undefined and EAR99 export classification. No explicit RoHS, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this general-purpose logic device.